TP-Link RE655 Bedienungsanleitung

TP-Link WLAN-Repeater RE655

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link RE655 (2 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

7106509109 REV2.1.0

Plug the extender into a power outlet your router. next to

Wait until its Power LED turns solid on.

Power On

Relocate

Quick Installation Guide

Range Extender

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable,

then enjoy the internet. The password of your extended network is the

same as your host router.

Tip: For more intuitive location assistant, access extender settings via the Tether app and go to

Tools Location Assistant> .

Tip: You can also set up the extender in Access Point mode to transform your existing wired network

to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support/download.

Next to

Solid On

Router Devices

Halfway

Blue: Suitable location

Red: Too far from router

1. Plug in the extender about between your router and the Wi-Fi dead halfway

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns . If it doesn't, solid blue

relocate the extender closer to the router to achieve better signal quality.

Set Up

1. Get the up-to-date Tether app from the

Apple App Store or Google Play, or simply

scan the QR code.

Tether

Scan for Tether

Via the Tether App

For more details, please refer to the user guide at

https://www.tp-link.com/support/download.

Via a Web Browser

1. Connect your computer or smartphone to

the extender’s network TP-Link_Extender.

2. Visit http://tplinkrepeater.net or

http://192.168.0.254 in a web browser.

Create a password to log in.

3. Follow web instructions to complete the setup.

Via the WPS Button

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The LED should

change from blinking to solid on, indicating

successful connection.

3. If the extender connects to a dual-band router,

repeat steps 1 and 2 to connect to the other

band.

1. Press the WPS button on your router.

Extended Network Names:

Router’s network name with

_EXT

at the end

Same as your OneMesh router

(See back for OneMesh details)

Passwords:

Same as your router

More Setup Methods

2. Launch the Tether app and log in with your

TP-Link ID. If you don’t have an account,

create one first.

Welcome to Tether

TP-Link ID (Email)

Password

Solid On

Note: If you cannot find your device, please refer to

FAQ > .Q1

Note: If the LED does not turn solid on, please refer to

FAQ > .Q2

4. Follow app instructions to complete the setup.

The LED should turn solid on, indicating

successful connection to your router.

3. Tap the button and select .Range Extender

My Devices

No devices found.

Choose your device type

Router

Gaming Router

Range Extender

Setup with videos

Scan the QR code, or visit

https://www.tp-link.com/support/setup-video/#range-extenders

and search for the setup video of your model.

Q1. What should I do if the Tether app cannot nd my device?

1. Connect your smartphone to the extender’s network .TP-Link_Extender

2. Launch the Tether app, and select your extender.

Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, turn off

your cellular data.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi passwords for your host router during the

conguration. Check the passwords and try again.

Make sure the extender is close to your router, preferably within 16 feet, and

away from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting it up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the button for 1 second. Reset

The extender will reboot.

LED Status Indication (For Range Extender Mode)

5GHz On/O

2.4GHz On/O

The extender is connected or not connected to

the 5GHz wireless network of your router.

The extender is connected or not connected to

the 2.4GHz wireless network of your router.

The extender is on or o.

The system is starting up or rmware upgrade is in

progress.

Power

On/O

Blinking

(Signal)

The extender is connected to your router’s

wireless network and is in a suitable location.

The extender is receiving a weak signal. Try

relocating it closer to your router.

WPS connection is in progress.

No wireless connection is established.

Solid blue

Solid red

Blinking

O

LED Explanation

Reset

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

< Settings

My Devices

Local Device

RExxx

XX-XX-XX-X X-XX-X X

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please

Do not use the device where wireless devices are not allowed.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device.

Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and

(EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs for our product guides, you

are welcome to email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the

TP-Link Community at https://community.tp-link.com.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and

3. View or change extender settings as needed.

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below.

You can reselect host network, change extended network settings and more.

Note: If your extender and router use the same network name, is recommended.Method 1

TP-Link OneMesh router and extenders work together to form one unied Wi-Fi

network. Walk through your home and stay connected with the fastest possible

speeds thanks to OneMesh’s seamless coverage.

OneMesh

with Seamless Roaming

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your

home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password,

access control settings and more.

To check full list of TP-Link OneMesh devices, scan the QR code,

or visit https://www.tp-link.com/onemesh/compatibility.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the

Tether app or at your router’s web management page.

IN TER NET

SAME

Network Name & Password

for seamless roaming

Produktspezifikationen

Marke:	TP-Link
Kategorie:	WLAN-Repeater
Modell:	RE655
WLAN:	Ja
Breite:	86 mm
Tiefe:	163 mm
Produkttyp:	Netzwerk-Repeater
Produktfarbe:	Weiß
Übertragungstechnik:	Verkabelt & Kabellos
Höhe:	40 mm
Netzstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Unterstützte Sicherheitsalgorithmen:	64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
Schnittstellentyp Ethernet-LAN:	Gigabit Ethernet
Stromverbrauch (Standardbetrieb):	15 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Maximale Datenübertragungsrate:	1733 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Anzahl der Antennen:	4
Web-basiertes Management:	Ja
Schnellinstallationsanleitung:	Ja
Top WLAN-Standard:	Wi-Fi 5 (802.11ac)
Nachhaltigkeitskonformität:	Ja
Nachhaltigkeitszertifikate:	CE, RoHS
WLAN-Band:	Dual-Band (2,4 GHz/5 GHz)
Verkabelungstechnologie:	10/100/1000Base-T(X)
Antennen-Design:	Extern
WPS Sicherheit per Tastendruck:	Ja
Ethernet/LAN:	Ja
Übertragungsgewinn:	20 - 23 dB