Thorens TD 810 Bedienungsanleitung

Thorens DJ Ausrüstung TD 810

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Thorens TD 810 (4 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
TD 800 Series
Instruction Manual
Dear Thorens customer, many thanks for your confidence
into our product, the record player of the 800 Series. With
the purchase of your record player you acquired a precision
instrument for the playback of records. To make him sound
perfect there is some attention necessary for setup and
handling. The manufacturing of this drive and the assembly
takes place completely in Germany at the highest enginee-
ring standarts - this still guarantees highest quality after
years. Understandably you want to start as immediately as
possible with listening to music. We ask you however:
Please read this guidance before the first use attentively, so
that you can use the drive optimally. We tried to put all the
necessary information into this manual. If you should have
still questions, which are not answered here, then you con-
tact us directly at www.Thorens.ch or with e-mail: tech-
nik@Thorens.ch.
Your team of Thorens
Conformity Declaration
We acknowledge the fact that the device belongs to this
instruction manual corresponds to valid EEC guidelines at
the time of printing for the acquisition of the CE-Sign. All the
necessary checks were made with positive result.
Warranty
Thorens manufacturer warranty. We commit ourselves to
replace incorrect sections of this device free of charge if it
should fail within the guarantee period. The warranty
amounts 2 year s for the turntable, counted starting from the
purchase date. The terms of the warranty are valid only if
within 4 weeks the enclosed warranty card is transmitted or
sended and filled out to Thorens. If this should not occur,
the warranty is 12 months. The manufacturer warranty
going beyond the legal warranty duration of 12 months ent-
itled Thorens to make on his own decision exchange or
repair of the defective sections. If a defect of your device
occurs within the guarantee period, then you inform
Thorens or your dealer under specification of the type of the
problem. Damage, which take place via neglect of the ope-
rating instruction or via outside mechanical effects, as well
as transport damages are not taken off by the warranty. The
warranty extends only to the turntable and the motor inclu-
sive power pack. Tone arm and pick-ups have the warranty
granted by the respective manufacturer. Warranty is valid
only for the first owner of the turntable. Sending the warr-
ranty card could be done by e-mail to technik@Thorens.ch
or by mail to THORENS EXPORT COMPANY LTD
IM JUNKHOLZ 44 ·
CH-4303 KAISERAUGST-BASEL / SWITZERLAND
Use of the turntable
Your turntable has been built to be used in closed rooms.
Please only use it in such rooms. Make sure that there is
not water or humidity close to the turntable or the PS 800
power supply.
The PS Power pack operates with 115V/230V main voltage.
Do never open it before pulling the main plug. There are no
user serviceable parts inside the PS 800.
In any case of a damage or question please contact your
importer or us.
Setup of the turntable
To avoid damages during transport your turntable comes
carefully packed and separated. Take out carefully all the
included parts. Place the included plates for the spikes
where you want to have the turntable playing. Place the
chassis on top of them. Adjust the correct height by turning
the spikes. Check the correct adjustment with a spirit level.
Now place the turntable platter with his axle over the bea-
ring and let it slide into it. Take care that the front end of the
axle is not crashing onto the bearing bottom. Then place the
rubber belt around the platter and the motor. Now put the
feltmat on the platter
Connecting the motor
Connect the motorcable with the power pack Ps 800. The
backside of the ps 800 offers 1 connector for motor. So plug
in the motor cable into the Ps 800 and lock the screws.
Make sure that the ON/OFF switch at the front side is in Off
position and the speed selector is on 33 rpm. Then plug in
the 3-pin connector from the external AC/AC adaptor to the
plug on the back of the PS800. Then connect the main
power cable to the AC/AC adaptor.
CAUTION! Never plug or unplug a motor while the Ps
800 is running. It will be damaged!
The Ps 800 power pack gets warm make sure that it is stan-
ding free so that the air can circulate.
On the Front of the Ps 800 are 2 switches. The left one is
for switching the Ps 800 on and off. An LED indicates the
operation. The right one is the speed selector. The you can
select between 33 and 45 rpm.
Because of an overload protection you must let the
turntable run for 33 rpm before switching to 45rpm. If
you do not do that the turntable will not spin at 45rpm.
Connecting the tonearm
Use the supplied RCA cable(Blue) and plug it into the plugs
on the back side of the turntable behind the tonearm. White
is left and red is right channel.
If your tonearm has not been supplied from Thorens please
use the manual supplied with the tonearm to make the
connection correct. This is only for turntables with Thorens
TP 250 or TP 300 tonearm factory mounted.
So now your turntable is ready to play.
If you have any questions please contact our service at:
e-mail: technik@thorens.ch
or your local distributor.
Thorens TP 300
Anti Skating(Bias) adjustment
Set the bias adjustment knob to the same number as the
tracking force. NOTE: This setting is not critical and a figu-
re of 1-1.5g will normally be suitable for moving magnet car-
tridges and 1.5-2g for most of the MC cartridges.

Produktspezifikationen

Marke: Thorens
Kategorie: DJ Ausrüstung
Modell: TD 810

Brauchst du Hilfe?

Wenn Sie Hilfe mit Thorens TD 810 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung DJ Ausrüstung Thorens

Thorens

Thorens TD 810 Bedienungsanleitung

8 September 2024
Thorens

Thorens TD 240-2 Bedienungsanleitung

10 August 2024
Thorens

Thorens TD MINI Bedienungsanleitung

23 Juli 2024
Thorens

Thorens TD 206 Bedienungsanleitung

21 Juli 2024
Thorens

Thorens TD 700 Bedienungsanleitung

1 Februar 2024
Thorens

Thorens TD 190-2 Bedienungsanleitung

17 August 2023

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-

Line 6

Line 6 HX Effects Bedienungsanleitung

15 Oktober 2024
Korg

Korg DT-10 Bedienungsanleitung

8 Oktober 2024
Tascam

Tascam XS-3 Bedienungsanleitung

2 Oktober 2024
Audio-Technica

Audio-Technica AT-VM95EN Bedienungsanleitung

29 September 2024
Behringer

Behringer CMD DC-1 Bedienungsanleitung

28 September 2024
Korg

Korg OT-120 Bedienungsanleitung

27 September 2024
Korg

Korg DTR-2000 Bedienungsanleitung

26 September 2024
Festo

Festo CPX-E-CEC-M1 Bedienungsanleitung

24 September 2024
BeamZ

BeamZ StarFuzer Bedienungsanleitung

24 September 2024
Focusrite

Focusrite Clarett 4Pre USB Bedienungsanleitung

23 September 2024