Tenda TEG1110PF-8-102W Bedienungsanleitung

Tenda Schalter TEG1110PF-8-102W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tenda TEG1110PF-8-102W (1 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Model: TEG1105P-4-63W/TEG1109P-8-102W

Package contents

Quick installation guide * 1

Switch * 1

Power adapter * 1

1 Product overview.

Quick Installation Guide

5-Port Gigabit Desktop Switch With 4-Port PoE

9-Port Gigabit Desktop Switch With 8-Port PoE

Fig 1. Front panel of TEG1105P-4-63W

Working mode slide switch

2. Connecting the devices

LED Indicator

Status

Description

PWR or

Power

Solid on

The switch is connected to a power supply properly.

Off

The switch is disconnected from a power supply or not

properly connected to a power supply.

Link/Act

(In the upper-left

corner of each port)

Solid on

The port is connected properly.

Blinking

Data is being transmitted over the port.

Off

The port is disconnected or improperly connected.

PoE

(In the upper-right

corner of ports 1 – 4 of

TEG1105P-4-63W)

Solid on

The port is connected to a PoE-powered device and

powering it on properly.

Off

The port is disconnected from a PoE-powered device or

does not power it on properly.

Working mode introduction

The PoE switch has two modes: Default/VLAN Off, and VLAN/VLAN On. Use

the slide switch to set the PoE switch to your required mode according to the

following descriptions.

Default/VLAN Off: Default mode of the PoE switch. In this mode, all ports can

communicate with each other.

VLAN/VLAN On: In this mode, ports 1 to 4 of TEG1105P-4-63W can

communicate with port 5 but cannot communicate with each other. Ports 1 to

8 of

TEG1109P-8-102W can communicate with port 9 but cannot communicate

with each other. You can enable this mode to reduce broadcast storm and

isolate DHCP broadcast.

Model

TEG1105P-4-63W

TEG1109P-8-102W

Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,

Port

10/100/1000 Mbps

Lightning protection

6 kV

Performanc

Switching capacity

10 Gbps

18 Gbps

MAC address table

2 K

16 K

MAC address learning

Auto learning & auto aging

Store-and-forwa rd

Supported

PoE power

supply

PoE standard

IEEE 802.3af, IEEE 802.3at

PoE port

1 - 4

1 - 8

Maximum power

output of a single port

30 W

Maximum power

output of the switch

58 W

92 W

PoE power cable core

8 cores: v oltage of cores 1, 2, 4, 5 is +, and cores 3, 6, 7, 8

Environmen

Operating

environment

Temperat ure: (0 - 40) °C

Humidity: (10% - 90%) RH non-condensing

Storage environment

Temperat ure: (-40 - 70) °C

Humidity: (5% - 90%) RH, non-condensing

Power supply

Input: 100-240 V, AC, 50/60

Dimension

100 mm * 100 mm * 26 mm

177.5 mm * 108 mm * 26 mm

Transmission rat e

Ethernet: 10 Mbps (half duplex) / 20 Mbps (full duplex)

Fast Ethernet: 100 Mbps (half duplex) / 200 Mbps (full

duplex)

Transmission media

Ethernet: CAT 3 UTP/ST P cable or better

Fast Ethernet: C AT5 U TP/STP cable or better

Gigabit Ethernet: CAT 5e or CAT6 UTP/STP cable

(recommended)

Specifications

Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other

brand and product names mentioned herein are trademarks or registered trademarks of their

respective holders. Specifications are subject to change without notice.

Technical Support

Shenzhen Tenda Technology Co., Ltd.

6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China.

518052

Canada hotline: 1-888-998-8966

Toll Free: Mon to Fri, 9am to 6pm PST

Hong Kong hotline: 00852-81931998

Website: http://www.tendacn.com

E-mail: support@tenda.com.cn

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in

which case the user may be required to take adequate measures.

The mains plug is used as disconnect device; the disconnect device shall remain readily operable.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is

recommended to use a shielded RJ45 cable.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is

recommended to use a shielded RJ45 cable.

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).

This means that this product must be handled pursuant to European directive 2012/19/EU in order to

be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when

he buys new electrical or electronic equipment.

Producto

NOMBRE DEL PRODUCTO:

Conmutador de escritorio de 5 puertos Gigabit con 4 puertos PoE

Alimentador de Energía:

Alimentación: 100 - 240 V ca 50/60 Hz, 1.2 A

Producto

NOMBRE DEL PRODUCTO:

Conmutador de escritorio de 9 puertos Gigabit con 8 puertos PoE

Alimentador de Energía:

Alimentación: 100 - 240 V ca 50/60 Hz, 1.6 A

PAIS DE ORIGEN: CHINA

LA OPERACIóN DE ESTE DISPOSITIVO ESTA SUJETA A LAS SIGUIENTES CONDICIONES:

a) Es posible que este equipo o dispositivo no cause interferencia perjudicial.

b) Este equipo o dispositivo debe aceptar cualquier tipo de interferencia, incluyendo la que

pueda causar su operación no deseada.

Power jack

Grounding terminal

Link/Act indicator

PoE indicator Power indicator

PoE ports 1-4 Uplink port

Fig 2. Back panel of TEG1105P-4-63W

TEG1109P-8-102W

VLAN

Off On

9-Port Gigabit Desktop Switch With 8-Port PoE

PWR

9 (Uplink)

Fig 3. Front panel of TEG1109P-8-102W

PWR indicator

Fig 4. Back panel of TEG1109P-8-102W

Link/Act indicator

Working mode slide switch

Uplink port

PoE ports 1-8

Power jack

Grounding terminal

(Example: TEG1109P-8-102W)

All ports of your switch support the auto MDI/M DIX function, indicat ing

that either straight cable or crossov er cable is acceptable to connect your

switch to Ethernet devices.

Tip

PoE ports of your switch are assigned with power supply priorities to

protect t he switch from overload, and the priorities decreases as the port

number increases. When the total power requirement of t he PoE-powered

devices exceeds 58 W for TEG1105P-4-63W or 92 W for TEG 1109P-8-102W,

the switch starts cutting the power supply from the port with t he lowest

priority, until the total requirement does not exceed 58 W / 92 W.

To protect your switch from lightning damage, connect the grounding

terminal to a grounding cable.

Router

LAN port WAN port

LAN 1 LAN 2 LAN 3 L AN4 WAN

Uplink port

Power Adapter

PoE switch Internet

Computer

PoE-powered devices

IP camera IP phoneAP

Caution: (For TEG1105P-4-63W)

Adapter Model: BN031-A65051

Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.

Input: 100 - 240 V AC, 50/60 Hz, 1.2 A

Output: 51 V 1.25 A

: DC Voltage

Caution: (For TEG1109P-8-102W)

Adapter Model: BN038-A10151

Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.

Input: 100 - 240 V AC, 50/60 Hz, 1.6 A

Output: 51 V 2 A

: DC Voltage

LED-Anzeige

Status

Beschreibung

PWR oder Power

Aus

Der Switch ist von der Stromversorgung getrennt oder nicht

Link/Act

(In der linken oberen

Ecke eines jeden Ports)

PoE

(In der rechten oberen

Ecke der Ports 1 – 4 von

TEG1105P-4-63W)

Leuchtet

Dieser Port ist mit einem PoE fähiges Gerät verbunden und

Aus

Dieser Port ist mit keinem PoE fähiges Gerät verbunden oder

startet nicht korrekt.

Einführung in die Betriebsmodi

Der PoE-Switch hat zwei Modi: Default/VLAN Off und VLAN/VLAN On. Schalten Sie den

PoE-Switch über den Schieberegler in den gewünschten Modus. Wählen Sie den Modus

gemäß der nachfolgenden Beschreibungen aus.

Default/VLAN Off: Ist der Standardmodus des PoE-Switches. In diesem Modus

funktioniert der PoE-Switch als unverwalteter PoE-Switch und alle Ports können

untereinander kommunizieren.

VLAN/VLAN On: In diesem Modus können die Ports 1 bis 4 des TEG1105P-4-63W mit

dem Port 5 kommunizieren aber nicht untereinander. Die Ports 1 bis 8 des TEG1109P-8-

102W können dann mit Port 9 kommunizieren aber nicht untereinander. Verwenden Sie

diesen Modus, um Broadcast-Storm zu reduzieren oder den DHCP-Broadcast zu

Deutsch

Indicatore LED

Stato

Descrizione

PWR o Power

Spento

L'interruttore è scollegato dall'alimentazione o non

Link/Act

(Nell'angolo in alto a

sinistra di ogni porta)

Accensione

I dati vengono trasmessi attraverso la porta.

Spento

La porta è scollegata o collegata in modo non corretto.

PoE

(Nell'angolo in alto a

destra delle porte 1 – 4

di TEG1105P-4-63W)

Accensione

La porta è collegata a un dispositivo PoE e viene accesa

Spento

La porta è scollegata da un dispositivo PoE o non viene

Introduzione modalità di lavoro

Lo switch PoE presenta due modalità: Default/VLAN Off, e VLAN/VLAN On. Utilizzare

l'interruttore scorrevole per regolare l'interruttore PoE nella modalità richiesta secondo

le seguenti indicazioni.

Default/VLAN Off: Modalità predefinita dell'interruttore PoE. In questa modalità,

l'interruttore PoE svolge la funzione di un interruttore PoE non gestito, e tutte le porte

possono comunicare le une con le altre.

VLAN/VLAN On: In questa modalità, le porte 1 – 4 del TEG1105P-4-63W possono

comunicare con la porta 5 ma non tra di loro. Le porte 1 – 8 del TEG1109P-8-102W

possono comunicare con la porta 9 ma non tra di loro. Si può utilizzare questa modalità

per ridurre il broadcast storm e isolare la trasmissione DHCP.

Italiano

Indicador LED

Estado

Descrição

PWR ou Power

Off (Desligado)

O interruptor é desligado da fonte de alimentação ou não

Link/Act

(No canto superior

esquedo de cada porta)

A piscar

Os dados estão a ser transmitidos pela porta.

Off (Desligado)

A porta está desconectada ou indevidamente conectada.

PoE

(No canto superior

direito das portas 1 – 4

do TEG1105P-4-63W)

Sólido ativado

A porta está conectada a um dispositivo PoE e a carregar

Off (Desligado)

A porta está desconectada de um dispositivo PoE ou não

Introdução ao Modo de Trabalho

O interruptor PoE tem dois modos: Default/VLAN Off e VLAN/VLAN On. Use o controlo

deslizante para definir o interruptor PoE para o modo necessário de acordo com as

seguintes descrições.

Default/VLAN Off: Modo padrão do interruptor PoE. Neste modo, o interruptor PoE

funciona como um interruptor PoE não gerido e todas as portas podem comunicar

entre si.

VLAN/VLAN On: Neste modo, as portas 1 a 4 do TEG1105P-4-63W podem comunicar

com a porta 5 mas não podem comunicar entre si. As portas 1 a 8 do TEG1109P-8-

102W podem comunicar com a porta 9 mas não podem comunicar entre si. Pode

utilizar este modo para reduzir os distúrbios de transmissão e isolar a transmissão

Português

Indicador LED

Estado

Descripción

PWR o Power

Encendido

El dispositivo está conectado a la fuente de alimentación

Apagado

El switch está desconectado de una fuente de alimentación o no

Link/Act

(en la esquina superior

izquierda de cada

PoE

(en la esquina superior

derecha de los puertos

1 – 4 del

Encendido

El puerto está conectado a un dispositivo PoE y transmite la

alimentación correctamente.

Apagado

El puerto no está conectado a un dispositivo PoE o no transmite

la alimentación correctamente.

Introducción al Modo Trabajo

El switch PoE dispone de dos modos: Default/VLAN Off y VLAN/VLAN On. Use el

interruptor para establecer el switch PoE en el modo deseado de acuerdo con las

descripciones siguientes.

Default/VLAN Off: modo predeterminado del switch PoE. En este modo, el switch PoE

funciona como un switch PoE no administrado y todos los puertos pueden comunicarse

entre sí.

VLAN/VLAN On: En este modo, los puertos 1 a 4 del TEG1105P-4-63W pueden

comunicarse con el puerto 5 pero no pueden comunicarse entre sí. Los puertos 1 a 8

del TEG1109P-8-102W pueden comunicarse con el puerto 9 pero no pueden

comunicarse entre sí. Puede usar este modo para reducir la tormenta de difusión y

Español

Indicateur LED

Statut

Description

PWR ou Power

Eteint

Le commutateur est déconnecté de la source d’alimentation

Link/Act

(En haut à gauche

de chaque port)

PoE

(En haut à droite des

ports 1 à 4 de

TEG1105P-4-63W)

Solide en

Le port est connecté à un périphérique PoE et l'alimente

Eteint

Le port est déconnecté d'un périphérique PoE ou ne

Introduction du mode de fonctionnement

Le commutateur PoE a deux modes: Default/VLAN Off, et VLAN/VLAN On. Utilisez la

glissière pour régler le commutateur PoE au mode requis selon les descriptions

suivantes.

Default/VLAN Off: Mode par défaut du commutateur PoE. Paramétré sur ce mode, le

commutateur PoE fonctionne comme un commutateur PoE non-géré et tous les ports

peuvent communiquer entre eux.

VLAN/VLAN On: Dans ce mode, les ports 1 à 4 de TEG1105P-4-63W peuvent

communiquer avec le port 5 mais pas entre eux. Les ports 1 à 8 de TEG1109P-8-102W

peuvent communiquer avec le port 9 mais pas entre eux. Vous pouvez activer ce mode

Français

LED индикатор

Статус

Описание

PWR или Power

Без прекъсване

Превключвателят е свързан правилно с електрозахранването.

Изключен (Off)

Прекъсвачът е изключен от захранването или не е свързан

правилно с него.

Link/Act

(в горния ляв ъгъл

на всеки порт)

Без прекъсване

Портът е свързан правилно.

Мигащ

Данните се предават през порта.

Изключен (Off)

Портът е прекъснат или неправилно свързан.

PoE

(в горния десен

ъгъл на портове

1 – 4 от

TEG1105P-4-63W)

Без прекъсване

Този порт е свързан към устройство със захранване по

Ethernet (PoE) и се захранва правилно.

Изключен (Off)

Този порт не е свързан към устройство със захранване по

Ethernet (PoE) и не се захранва правилно.

Въведение в работния режим

Превключвателят за захранване по Ethernet (PoE) има два режима:

Default/VLAN Off VLAN/VLAN On (По подразбиране/VLAN изключено) и и

(VLAN/VLAN включено). Използвайте страничния превключвател, за да

настроите превключвателя за захранване по Ethernet (PoE) в изисквания

режим според следните описания.

Default/VLAN Off: Режим по подразбиране на превключвателя за захранван

е по Ethernet (PoE). В този режим превключвателят за захранване по

Ethernet (PoE) функционира като нерегулиран превключвател за захранване

по Ethernet (PoE) и всички портове могат да комуникират един с друг.

VLAN/VLAN On: 1 до 4 от TEG1105P-4-63W могат В този режим портове от

да комуникират с порт 5, но не могат да комуникират един с друг. Портове

от 1 до 8 от TEG1109P-8-102W могат да комуникират с порт 9, но не могат да

комуникират един с друг. Можете да използвате този режим, за да намалите

бродкаст бурята и да изолирате излъчването на DHCP.

Български

LED visszajelző

Státusz

Leírás

PWR vagy Power

Folyamatosan

A készülék helyesen van az energiaellátáshoz csatlakoztatva.

kikapcsolva

A váltó nincs, vagy nem megfelelően van csatlakoztatva a

tápegységhez.

Link/Act

(Az egyes portok bal

felső sarkánál)

Folyamatosan

Az egyező port helyesen van csatlakoztatva.

Villog

Adatátvitel van folyamatban a porton keresztül.

PoE

(A TEG1105P-4-63W

1–4-es portjainak

jobb felső sarkánál)

Folyamatosan

A port PoE eszközhöz van csatlakoztatva, és megfelelő

kikapcsolva

A port nincs csatlakoztatva PoE eszközhöz, vagy nem

Bevezetés: üzemmódok

A PoE kapcsoló két üzemmóddal rendelkezik: Default/VLAN Off

(Alapértelmezett/VLAN kikapcsolva) és VLAN/VLAN On (VLAN/VLAN bekapcsolva). A

csúszókapcsolóval állítsa a PoE kapcsolót a kívánt üzemmódba az alábbi leírások

szerint.

Default/VLAN Off: A PoE kapcsoló alapértelmezett üzemmódja. Ebben az

üzemmódban felügyelet nélküli PoE kapcsolóként működik a PoE kapcsoló, és az

összes port képes kommunikálni egymással.

VLAN/VLAN On: Ebben az üzemmódban a TEG1105P-4-63W 1–4-es portja képes

kommunikálni az 5-ös porttal, de nem képesek kommunikálni egymással. A

TEG1109P-8-102W 1–8-as portja képes kommunikálni a 9-es porttal, de nem képesek

Magyar

Светодиодный

индикатор

Статус

Описание

PWR или Power

Горит постоянно

Коммутатор подключен к источнику питания.

Выключено

Коммутатор отключен от источника питания или

подключен к нему неправильно.

Link/Act

(в левом верхнем

углу каждого

порта)

Горит постоянно

Порт подключен правильно.

Мигает

Через порт осуществляется передача данных.

Выключено

Подключение к порту не выполнено или выполнено

неправильно.

PoE

(в левом правом

углу портов 1 – 4

устройства

TEG1105P-4-63W)

Горит постоянно

Порт подключен к устройству с питанием по технологии

PoE и питание подается правильно.

Выключено

Порт отключен от устройства с питанием по технологии

PoE или питание подается неправильно.

Обзор режимов работы

У коммутатора с PoE есть два режима: и . Default/VLAN Off VLAN/VLAN On

Используйте переключатель для перевода коммутатора с PoE в нужный

режим, выбранный на основе описания.

Default/VLAN Off: PoE. В этом режиме Режим по умолчанию коммутатора с

коммутатор с PoE работает в качестве неуправляемого коммутатора с PoE, и

все порты могут подключаться друг к другу.

VLAN/VLAN On: 1 – 4 устройства TEG1105P-4-63W В этом режиме порты

могут подключаться к порту 5, но не могут подключаться друг к другу.

Порты 1 – 8 устройства TEG1109P-8-102W могут подключаться к порту 9, но

не могут подключаться друг к другу. В этот режим можно перейти, чтобы

уменьшить broadcast шторм и изолировать DHCP broadcast.

Русский

Indicator LED

Stare

Descriere

PWR sau Power

Rămâne aprins

Dispozitivul este conectat corect la sursa de alimentare.

Oprit

Switch-ul este deconectat de la sursa de alimentare sau nu

Link/Act

(în colţul din stânga-

sus al fiecărui port)

Rămâne aprins

Portul corespunzător este conectat corect.

Lumineaza

intermitent

Datele sunt transmise prin port.

Oprit

Portul este deconectat sau nu este conectat corect.

PoE

(în colţul din

dreapta-sus al

porturilor 1 – 4 ale

Rămâne aprins

Portul este conectat la un dispozitiv PoE şi se alimentează

Oprit

Portul este deconectat de la un dispozitiv PoE şi nu se

Prezentarea modurilor de lucru

Switch-ul PoE are două moduri: Default/VLAN Off şi VLAN/VLAN On. Setati switch-ul

PoE în modul dorit din comutator, conform următoarelor descrieri.

Default/VLAN Off: Modul implicit al switch-ului PoE. În acest mod, switch-ul PoE

funcţionează ca un switch PoE fără management şi toate porturile acestuia pot

comunica între ele.

VLAN/VLAN On: În acest mod, porturile 1 – 4 ale TEG1105P-4-63W pot comunica cu

portul 5 dar nu pot comunica între ele. Porturile 1 – 8 ale TEG1109P-8-102W pot

comunica cu portul 9 dar nu pot comunica între ele. Puteți utiliza acest mod pentru a

Română

Kontrolka LED

Stan

Opis

PWR lub Power

Ciągłe światło

Urządzenie jest prawidłowo podłączone do źródła zasilania.

Wyłączone

Urządzenie jest odłączone od źródła zasilania lub nie zostało

do niego poprawnie podłączone.

Link/Act

(w lewym górnym

rogu każdego portu)

Ciągłe światło

Gniazdo jest połączone poprawnie.

Miganie

Port obsługuje przesyłanie danych.

Wyłączone

Port jest odłączony lub niepoprawnie podłączony.

PoE

(w prawym górnym

rogu portów 1 – 4

urządzenia

Ciągłe światło

Port jest podłączony do urządzenia PoE i zasila urządzenie

prawidłowo.

Wyłączone

Port jest odłączony od urządzenia PoE lub nie włącza go

prawidłowo.

Wprowadzenie do trybów pracy

Switch PoE może działać w dwóch trybach: Default/VLAN Off. i VLAN/VLAN On. Za

pomocą przełącznika włącz w switchu PoE wymagany tryb pracy. Opisy trybów znajdują

się poniżej.

Default/VLAN Off: Tryb domyślny switcha PoE. W tym trybie urządzenie działa jako

niezarządzany switch PoE, a wszystkie jego porty komunikują się ze sobą.

VLAN/VLAN On: W tym trybie porty od 1 do 4 urządzenia TEG1105P-4-63W mogą

komunikować się z portem 5, ale nie ze sobą nawzajem. Porty od 1 do 8 urządzenia

TEG1109P-8-102W mogą komunikować się z portem 9, ale nie ze sobą nawzajem.

Polski

TEG1109P-8-102W

VLAN

Off On

9-Port Gigabit Desktop Switch With 8-Port PoE

PWR 9 (Uplink)

Grounding terminal

Produktspezifikationen

Marke:	Tenda
Kategorie:	Schalter
Modell:	TEG1110PF-8-102W
Breite:	177.5 mm
Tiefe:	104 mm
Produktfarbe:	Grau
Höhe:	26 mm
Energiequelle:	Gleichstrom
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
DC input Spannung:	51 V
Betriebstemperatur:	0 - 45 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Stromverbrauch (Standardbetrieb):	92 W
Power over Ethernet (PoE):	Ja
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	Link, Power
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Switch-Typ:	Managed
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	9
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Netzstecker:	DC-Anschluss
10G-Unterstützung:	Nein
MAC-Adressentabelle:	16000 Eintragungen
Routing-/Switching-Kapazität:	20 Gbit/s
Rack-Einbau:	Nein
Nachhaltigkeitskonformität:	Ja
Nachhaltigkeitszertifikate:	Federal Communications Commission (FCC), RoHS
Eingangsstrom:	2 A
Wandmontage:	Ja
Store-and-Forward:	Ja
Netzteil enthalten:	Ja
Gesamtleistung Power over Ethernet (PoE):	92 W
Anzahl installierten SFP Module:	1
Anzahl Power over Ethernet (PoE) Anschlüsse:	8
Power over Ethernet (PoE) Leistung pro Anschluss:	30 W
Paketweiterleitungsrate (1 Gbit/s):	14.9 pps