Tenda TEG1016G Bedienungsanleitung

Tenda Schalter TEG1016G

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tenda TEG1016G (10 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

is the registered trademark of Shenzhen Tenda

Technology Co., Ltd. All the products and product names mentioned

herein are the trademarks or registered trademarks of their respective

holders. Copyright of the whole product as integration, including its

accessories and software, belongs to Shenzhen Tenda Technology Co.,

Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd, any

individual or party is not allowed to copy, plagiarize, imitate or translate it

into other languages.

All the photos and product specifications mentioned in this guide are for

references only. As the upgrade of software and hardware, there will be

changes. And if there are changes, Tenda is not responsible for informing

in advance. If you want to know more about our product information,

please visit our website at www.tenda.cn.

1. Introduction

TEG1016G/1024G is a rack-mountable Gigabit Ethernet Switch, which is

specially designed to resolve data transfer bottleneck for enterprises and

Internet Cafés. It has 16/24 10/100/1000Mbps RJ-45 Auto-negotiation

Ethernet ports, supports auto MDI/MDI-X function. In addition, the Gigabit

ports can be used as normal ports to connect Gigabit terminals such as PC,

as well as Uplink ports to connect backbone network. You can replace the

10/100Mbps switch with the TEG1016G/TEG1024G to resolve the

bottleneck issues of server and terminal connectivity. Meanwhile, it can be

used as main switch to connect the Gigabit LAN of enterprises or Internet

Cafés, and greatly improves the transmission rate between different

departments, or terminal and server. In a word, it is a cost-effective Gigabit

Ethernet Switch with high performance.

1.1 Switch Features

¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3x

standards.

¾ Supports IEEE802.3x flow control for full-duplex, and backpressure

flow control for half-duplex.

¾ Provides 16/24 Gigabit self-adaptive RJ-45 ports, supports 802.3

NWay Auto-negotiation.

¾ Each RJ-45 port supports Auto-MDI/MDIX function.

¾ Supports MAC address auto-learning and aging function.

¾ Adopts store- and- forward switching method.

¾ Supports up to 32Gbps/48Gbps backplane bandwidth.

¾ Transmission rate of each port reaches up to 1488095pps.

¾ Supports 8K MAC address table

¾ Equipped with high performance power supply.

1.2 Package Contents

Please check the items carefully after you open the packing as below:

(The listed items are for reference only)

¾ One Gigabit Ethernet Switch

¾ One power cord

¾ One User Guide

¾ One Set of L-shaped Bracket （two mounting ears, matched

screws）

¾ Four foot pads

.3 Front Panel and Rear Panel Specifications

On the front panel, there are 16/24 1000Mbps RJ45 ports and LED

indicators as well as 1 power indicator.

Front panel view of the TEG1024G Switch

On the rear panel there are 1 AC power port and the matched power

supply mark.

Rear panel view of the Switch

Produktspezifikationen

Marke:	Tenda
Kategorie:	Schalter
Modell:	TEG1016G
WLAN:	Nein
Breite:	208 mm
Tiefe:	440 mm
Produktfarbe:	Blau
Übertragungstechnik:	Kabelgebunden
Höhe:	44 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Zertifizierung:	CE, RoHS
Vollduplex:	Ja
Power over Ethernet (PoE):	Nein
Warentarifnummer (HS):	85176990
LED-Anzeigen:	Link, Power
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Switch-Typ:	Unmanaged
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	16
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Auto MDI/MDI-X:	Ja
10G-Unterstützung:	Nein
Kupfer Ethernet Verkabelungstechnologie:	1000BASE-T, 100BASE-TX, 10BASE-T
MAC-Adressentabelle:	8000 Eintragungen
Routing-/Switching-Kapazität:	- Gbit/s
Rack-Einbau:	Ja
Benutzerhandbuch:	Ja
Größe (Imperial):	19 "
Formfaktor:	1U
Anzahl Gigabit Ethernet (Kupfer) Anschlüsse:	16
Abmessungen (BxTxH):	208 x 440 x 44 mm
Ausgangsleistung:	20 W
MAC Adressen Filtern:	Ja
Unterstützung Datenflusssteuerung:	Ja
Bandbreite:	32 Gbit/s
Max. Datenübertragungsrate:	1 Gbit/s
Datenrate:	10/100/1000 Mbps
Power-LED:	Ja
Netzwerkfunktionen:	Ethernet, Fast Ethernet, Gigabit Ethernet