Swann Indoor Siren Bedienungsanleitung

Swann Smarth-Startseite Indoor Siren

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swann Indoor Siren (3 Seiten) in der Kategorie Smarth-Startseite. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Overview
Thank you for choosing the - the Smart Home Indoor Siren
ideal addition to your Smart Home system. Please take a
moment to familiarize yourself with key parts of the siren.
SMARTHOME-ISVER1E
© Swann Communications 2018
Smart Home
Indoor Siren Cover
Front
Internal Components
Tamper
Spring Switch
Detects any
unauthorized
removal of the
siren cover,
causing the
siren to sound
Locking
Screw
Secures the
front cover to
the siren
ON/OFF
Switch
Connect
Button
Mounting
Holes x 4
Status LED
Battery
Compartment
Requires 4 x
"D" alkaline
batteries
(included)
QUICK START GUIDE EN
Security Made Smarter
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Battery Safety Information
Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries promptly in accordance with local regulations.
Correct Disposal of this Product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environment safe recycling.
Limited Warranty Terms & Conditions
Swann Communications warrants this product against defects in workmanship and material
for a period of one (1) year from its original purchase date. You must present your receipt
as proof of date of purchase for warranty validation. Any unit which proves defective during
the stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The end user is responsible for all freight charges incurred to send the
product to Swann’s repair centres. The end user is responsible for all shipping costs incurred
when shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from
the use of or the inability to use this product. Any costs associated with the fitting or removal
of this product by a tradesman or other person or any other costs associated with its use
are the responsibility of the end user. This warranty applies to the original purchaser of the
product only and is not transferable to any third party. Unauthorized end user or third party
modifications to any component or evidence of misuse or abuse of the device will render all
warranties void. By law some countries do not allow limitations on certain exclusions in this
warranty. Where applicable by local laws, regulations and legal rights will take precedence.
tech@swann.com
support.swann.com
USA & Canada 1800 627 2799 Australia 1800 788 210
UK & Europe 0808 168 9031 New Zealand 0800 479 266
Need Help?
CE marking on this product represents the product is in compliance with all directives
that are applicable to it.
Preparing the Siren Connecting the Siren Testing the Siren Mounting the Siren
Loosen the locking screw located at the top of the siren and
then remove the cover.
1 From the Smart Home web portal, click or tap
My Settings > Sirens > add device. The System
Setup screen is displayed and your Smart DVR/Hub
automatically goes into pairing mode.
Note: You can skip this step if the System Setup screen is
already displayed (during the Smart DVR/Hub registration
process, or when you are setting up other smart home
accessories).
2 Slide the siren's switch to the position.ON/OFF ON
3 Press and hold the siren's button until the status Connect
LED blinks once. When the siren has paired with your
Smart DVR/Hub, the status LED blinks twice.
4 Follow the on-screen instructions to complete the setup.
Before mounting the siren at the desired location, it is
important that you test the siren to ensure that it is within
effective wireless range of the Smart DVR/Hub from the
selected mounting position.
CAUTION
The siren is extremely loud! When testing the siren, protect
your hearing by wearing earplugs, or stand at least 3 meters
away from the siren.
To test the siren once it has been connected:
1. Arm your Smart Home system in Away mode. Wait for the
entry/exit delay (default is 20 seconds, unless configured
differently) to be over.
2. Trigger the siren alarm using one of these methods:
• opening a door where an entry sensor is installed
• walking in front of a motion sensor
3. To turn off the siren alarm, disarm your Smart Home
system by setting it to Home mode.
Note: Please ensure the siren is tested for connectivity before
permanent mounting.
Choose a central location in your home to place the siren
which mounts to any flat wall surface. Before mounting the
siren, make sure that the siren is switched off first by sliding
the switch to to prevent it from sounding if you ON/OFF OFF
inadvertently activate the tamper switch.
• Secure the siren onto the wall through the mounting
holes in the four outermost corners of the siren base
using appropriate wall plugs and screws for the wall
surface.
• Remember to turn on the siren by sliding the ON/OFF
switch to before replacing the siren cover. ON
• The siren's tamper protection function is only enabled
5 minutes after the siren is powered up. This gives
you enough time to replace the cover properly without
triggering the tamper alarm.
Connect Button
ON/OFF Switch
The siren is not pairing with my Smart DVR/Hub
Switch the siren off, then on again after 30 seconds. Then, try pairing the siren again.
The siren is offline
• An internet service outage may have occurred. Check to make sure that your broadband router is working properly and you are
able to access the internet with your other electronic devices. Once your internet service is back up, the siren will automatically
rejoin the system.
• The siren is running low on battery power. You can check the siren's battery status via the Smart Home portal. If a Low Battery
symbol is shown, replace the batteries in the siren with four fresh "D" alkaline batteries immediately.
Troubleshooting

Produktspezifikationen

Marke: Swann
Kategorie: Smarth-Startseite
Modell: Indoor Siren

Brauchst du Hilfe?

Wenn Sie Hilfe mit Swann Indoor Siren benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Smarth-Startseite Swann

Swann

Swann Indoor Siren Bedienungsanleitung

3 August 2024

Bedienungsanleitung Smarth-Startseite

Neueste Bedienungsanleitung für -Kategorien-

Elro

Elro AB600S-2 Bedienungsanleitung

14 Oktober 2024
ETiger

ETiger ES-D4A Bedienungsanleitung

4 Oktober 2024
Netgear

Netgear Orbi RBS50Y Bedienungsanleitung

2 Oktober 2024
Shelly

Shelly Qubino Wave 1PM Mini Bedienungsanleitung

1 Oktober 2024
Abus

Abus Z-Wave Gateway Bedienungsanleitung

27 September 2024
Chacon

Chacon 54650 Bedienungsanleitung

27 September 2024
EZVIZ

EZVIZ DL01 Pro Bedienungsanleitung

24 September 2024
Busch-Jaeger

Busch-Jaeger 2CKA006220A0006 Bedienungsanleitung

23 September 2024
JUNG

JUNG A 5192 KRM TS D Bedienungsanleitung

21 September 2024
Acer

Acer Air Monitor AM100 Bedienungsanleitung

20 September 2024