Swan SI3070N Bedienungsanleitung

Swan Eisen SI3070N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swan SI3070N (4 Seiten) in der Kategorie Eisen. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
design o ifeed f r l
v3.2
www.swan-brand.co.uk
Copyright © 2012
Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD
We lov e
what we do
s
2 year
GU TEEARAN
we’re prou d
o o ual yf ur q it
Scan this QR code
to hear about
our story
Find us on Facebook
Dual Voltage Travel Iron
Model: SI3070N
Help line: 0871 200 0003
SI3070N.indd 2-3 14/10/2014 10:13
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. Always ensure that the voltage on the rating label corresponds to the mains
voltage in your home
2. Incorrect operation and improper use can damage the appliance and cause
injury to the user.
3. This appliance can be used by children aged from 8 years and above if they
have been given supervision or instruction concerning use of the appliance
in a safe way and if they understand the hazards involved. Cleaning and user
maintenance shall not be made by children unless they are older than 8 and
supervised. Keep the appliance and its cord out of reach of children aged
less than 8 years.Check the power cord and plug regularly for any damage.
If the cord or the plug is damaged, it must be replaced by the manufacturer
or qualified person in order to avoid an electrical hazard.Check the power
cord and plug regularly for any damage. If the cord or the plug is damaged,
it must be replaced by the manufacturer or qualified person in order to avoid
an electrical hazard.
4. Do not use the appliance if it has been dropped or damaged in any way. In
case of damage, take the unit in for examination and/or repair by an author
ised service agent.
5. Never immerse the unit in water or any other liquid for cleaning purposes.
6. Remove the plug from the socket by gripping the plug. Do not pull on the cord
to disconnect the appliance from the mains. Unplug the unit when not in use
or before cleaning
7. The use of accessory attachments that are not recommended or supplied by
the manufacturer may result in injuries, fire or electric shock.
8. Do not let the cord hang over the edge of a table or counter. Ensure that the
cord is not in a position where it can be pulled on inadvertently.
9. Do not allow the cord to touch hot surfaces and do not place on or near a hot
gas or electric burner or in a heated oven.
10. Do not use the appliance on a gas or electric cooking top or over or near an
open flame.
11. Use of an extension cord with this appliance is not recommended. However,
if it is necessary to use an extension lead, ensure that the lead is suited to the
power consumption of the appliance to avoid overheating of extension cord,
appliance or plug point. Do not place the extension cord in a position where it
can be pulled on by children or animals or tripped over.
12. This appliance is not suitable for outdoor use. Do not use the appliance for
anything other than its intended use.
13. Do not carry the appliance by the power cord.
14. Do not leave the appliance unattended during use.
15. Always operate the appliance on a smooth, even, stable surface. Do not place
the unit on a hot surface.
16. The manufacture does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
17. In case of technical problems, switch off the product and do not attempt
to repair it yourself. Return the appliance to an authorised service facility for
examination, adjustment or repair. Always insist on the use of original spare
parts. Failure to comply with the above mentions precautions and instructions,
could affect the safe operation of this product.
18. Your appliance must never be switched on through an external timer or any
kind of separate remote control system
Speciî‚¿cation
Model No SI3070N.
110-120V/220V-240V~
50/60Hz 900-1100W
A. Soleplate
B. Main body
C. Steam shot button
D. Top panel
E. Steam Switch
F. Temperature dial
G. Water tank cover
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS
PARTS
Temperature guide
SI3070N.indd 4-5 14/10/2014 10:13
Before first use
Remove any stickers, protective foil or storage cover from the
soleplate.
1. Select the correct voltage for your loca-
tion
2. Lift the Water Tank Cover (G) and fill with
water to the MAX level mark
3. Connect the iron to the mais supply and put
the Steam Switch (E) into the desired position
4. Select correct temperature according to
garment label. Note: Start with lower tempera-
ture garments first. The Steam Shot button
(C) can be pressed to release a shot of steam
when higher temperature is selected.
5. After ironing, disconnect from mains supply,
allow to cool and empty water tank
Always check first whether a label with ironing instructions is attached to the article.
The iron heats up quicker than it cools down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fibres.
If the fabric consists of various kinds of fibres, you must always select the lowest
ironing temperature to iron the composition of those fibres.
Silk and other fabrics that are likely to become shiny should be ironed on the inner
side.
To prevent staining do not spray water straight on silk or other delicate fabrics.
Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keep the iron moving at any given moment.
Pure woollen fabrics (100% wool) may be ironed with the iron set a steam position.
Preferably set steam button to the maximum position and use a dry cloth as a mat.
Note: when ironing woolen fabrics, shining of the fabric may occur. So it is suggested
that you should turn the article inside out and iron the reverse side.
After ironing
Disconnect power supply, allow the iron to cool completely and empty the water left in water
tank. Reconnect the power supply and disconnect after indicator light goes off, this dries
the soleplate.
Let the iron completely cool down, then wipe flakes and any other deposits on the soleplate
with a damp cloth or a non-abrasive (liquid) cleaner. Clean the upper part of iron with a damp
cloth. Always store the emptied iron horizontally on a stable surface with a cloth protecting
the soleplate.
About limescale
If you live in a hard water area we recommend using bottled water for this iron. Excessive
limescale build-up will reduce ironing efficiency and shorten the life of the iron considerably.
HOW TO USE HOW TO USE
HOW TO USE
SI3070N.indd 6-7 14/10/2014 10:13


Produktspezifikationen

Marke: Swan
Kategorie: Eisen
Modell: SI3070N

Brauchst du Hilfe?

Wenn Sie Hilfe mit Swan SI3070N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Eisen Swan

Bedienungsanleitung Eisen

Neueste Bedienungsanleitung für -Kategorien-