Sunix UTS1009GC Bedienungsanleitung

Sunix Kabel für PCs und Peripheriegeräte UTS1009GC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sunix UTS1009GC (1 Seiten) in der Kategorie Kabel für PCs und Peripheriegeräte. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Microsoft Windows

In order to ensure proper operation of your USB to serial adapter, please follow the instructions below:

(1) Please go to SUNIX website for latest driver download.

(2) Click the Setup.exe from your driver.

(3) Follow the onscreen installation step.

(4)

After ﬁnishing installation, please connect the USB Serial Adapter to your PC.

(5) Please check to see if each is installed properly in Device Manager.

Start > Controller Panel > System > Device Manager

Apple macOS

Please download the driver for macOS, which includes driver and installation guide.

• Expands one independent RS-232 serial port through USB interface.

• Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.

• No IRQ, DMA, I/O address resource required.

• Supports USB2.0 and USB1.1 compatible.

• Serial port provides transmission rate up to 115.2Kbps.

• Built-in ± 15KV ESD protection for all serial signals.

• Compact Size and low power consumption.

• Supports USB bus power without additional external power.

• Certiﬁed by CE, FCC, RoHS, and Microsoft WHQL approval.

• Support Microsoft Windows and Linux.

Features

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into

asynchronous RS-232 serial ports for communication with serial devices. The UTS

adapter is compatible with both USB 2.0 and 1.1 speciﬁcations and provides serial port

with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-eﬀective way to

bring the advantages of data accessibility and mobile solution for kinds of commercial

and industrial automation applications.

Introduction

Please check if the following items are present and in good condition upon opening

package. Contact your vendor if any item is damaged or missing.

- USB to RS-232 Adapter, Cable 120 cm (4 ft)

Package Checklist

Pin Assignment

COM port pin assignments for USB to Serial Adapter

RS-232

DCD RxD TxD DTR GND DSR RTS CTS

1 2 3 4 5 6 7 8 9

DB9M:

1 5

(1) Right click your mouse on the COM port, and select � �.Properties

(2) Select �Port Setting� page to modify COM port setting.

(3) Select �Advanced� icon, you can modify COM port number and FIFO.

(4) When serial device requires setting to a speciﬁc COM number,

comﬁrm the port number match the

seetings required for your serial device.

After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.

Q 1. The USB to Serial Adapter will NOT communicate with my serial device.

Ans: It may cause by following issue:

a. Please verify that the USB to Serial Adapter is installed correctly.

b. Conﬁrm that the port settings match the settings required for your serial device.

c. If the serial device requires software, make sure it’s installed properly.

d. Make sure the number of ports is matching the number of USB to Serial Adapter COM port.

e. USB to Serial Adapter does NOT suppor t serial mouse.

f. Please download the latest driver to support your new serial product.

Q 2. Why the COM port number will be diﬀerent?

Ans: The COM port number is assigned by which USB slot is used to connect to the computer.

If changing USB slot, the por t number will change. Please keep installing USB adapter in the same USB slot.

Speciﬁcation

USB Communication

Interface Universal Serial Bus (USB)

Receptacle USB Type-A with cable

Controller Proliﬁc PL2303GC

Performance

USB 1.1 full speed 12Mbps

USB 2.0/3.0/3.1 compatible.

Serial Communication

Interface RS-232

Power

Input USB Bus-power 5VDC

Regulatory Approvals

Software

Microsoft WHQL certiﬁcation

Driver Communication

Windows Client

Windows Server

Windows Embedded

Linux

Mac

7 / 8.x / 10 (X86/X64)

2008R2 / 2012/2016(X64)

Windows Embedded CE, Windows CE

Linux 2.6.x or later

MAC OS X

Operating Environment

Temperature

Humidity

0 to 60 °C ( 32 to 140 °F )

5% to 95% RH

Storage Environment

Temperature -20 to 85 °C ( -4 to 185 °F )

Baud rate 75bps ~ 115.2Kbps

Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

FIFO 16 byte Hardware

Data bit 5, 6, 7, 8

Stop bit 1, 1.5, 2

Parity even, odd, none, mark, space

Flow Control

None, Xon/Xoﬀ, RTS/CTS

Receptacle D-Sub 9-pin Male

No. of Port

1, 2, or 4-por t (Product Dependent)

1-port: USB to 1-port RS-232 Model

2-port: USB to 2-port RS-232 Model

4-port: USB to 4-por t RS-232 Model

Protection

±15KV

ESD protection for each signal Human Body Model

±15KV IEC1000-4-2 Air Gap Discharge

±8KV ESD IEC61000-4-2 Contact Discharge

Consumption

Model

1-port: < 0.7W = 5Vx130mA

2-port: < 1.3W = 5Vx250mA

4-port: < 2.5W = 5Vx500mA

Hardware

EUR: CE, US: FCC, Japan: VCCI,

TAIWAN: BSMI

Driver Installation/Verify

Port Setting

After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.

Troubleshooting

Setup.exe

Copyright©2021 SUNIX Co., Ltd. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, photocopying, manual, or otherwise, without prior written permission from SUNIX Co., Ltd.

Disclaimer - SUNIX Co., Ltd. shall not be liable for any incidental or consequential damages resulting from the performance or use of this equipment. SUNIX Co., Ltd. makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability;

however, no guarantee is given as to the correctness of this content. In the interest of continued product improvement, this company reserves the right to revise the manual or include amendments in the speciﬁcations of the product described within it at any time without notice and without obligation to notify

any person of such revision or changes. The information contained in this manual is provided for general use by the customers. Trademarks - SUNIX is a registered trademark of SUNIX Co., Ltd. Other registered marks used herein are for identiﬁcation purposes only and may be trademarks of their respective