Netgear AGM731F Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear AGM731F (12 Seiten) in der Kategorie Kabel für PCs und Peripheriegeräte. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
RoHS Compliant Small
Form Factor Pluggable
Transceiver for Gigabit
Ethernet and Fiber
Channel
AGM731F
2
Rev. 0A
RoHS Compliant Small Form Factor Pluggable Transceiver for
Gigabit
Ethernet and Fiber Channel
FEATURES
Compliant with SFP Transceiver MSA
specification
Compliant with Specifications for IEEE
802.3z/Gigabit Ethernet
Compliant with the 1.0625GBd Fiber Channel
FC-PI 100-M5-SN-I Rev.13
Compliant with Industry Standard RFT
Electrical Connector and Cage
Single + 3.3V Power Supply and TTL Logic
Interface
EEPROM with Serial ID Functionality
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Duplex LC Connector interface
Description
This transceiver is hot pluggable 3.3V
Small-Form-Factor transceiver module designed
expressly for high-speed communication applications
that require rates of up to 1.25Gbit/sec. It is compliant
with the Gigabit Ethernet standards, as well as the SFP
Multisource Agreement (MSA).
It provides with the LC receptacle that is compatible
with the industry standard LC connector. The
transceiver is also compatible with industry standard
RFT connector and cage.
The post-amplifier of the transceiver also includes a
LOS (Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical signal level
is detected.
The transceiver is a Class 1 eye safety product.
The optical power levels, under normal operation, are
at eye safe level.
Applications
Gigabit Ethernet
Fibre channel
Switch to Switch interface
Switched backplane applications
File server interface
Performance
Data Link up to 550m in 50/125 m Multi Mode Fiber µ
Data Link up to 275m in 62.5/125 m Multi Mode Fiberµ
3
Rev. 0A
Absolute Maximum Ratings
Parameter Symbol
Min. Typ. Max. Unit Note
Storage Temperature Ts -40 85 ºC
Supply Voltage V
CC
0 5 V
Recommended Operating Conditions
Parameter Symbol
Min. Typ. Max. Unit Note
Case Operating Temperature T
C
-5 70 ºC
Supply Voltage V
CC
3.135
3.465
V
Electrical Characteristics
(V
CC
=3.135V to 3.465V)
Parameter Symbol
Min. Typ. Max. Unit Note
Total Supply Current I
CCT
180 300 mA
Transmitter
Transmitter Differential Input Voltage V
DT
0.5 2.4 V 1
Transmitter Disable Input-High V
DISH
2 V
CC
+0.3
V
Transmitter Disable Input-Low V
DISL
0 0.8 V
Transmitter Fault Output-High V
TXFH
2 V
CC
+0.3
V 2
Transmitter Fault Output-Low V
TXFL
0 0.8 V 2
Receiver
Receiver Differential Output Voltage V
DR
0.35 0.7 2 V 3
LOS Output Voltage-High V
LOSH
2 V
CC
+0.3
V 2
LOS Output Voltage-Low V
LOSL
0 0.8 V 2
Output Data Rise/Fall Time t
r
/ t
f
400 psec 4
Total Jitter (pk-pk) TJ
RX
220 psec
Notes:
1. Internally AC coupled and terminated to 100Ohm differential load.
2. Pull up to V
CC
with a 4.7K – 10K Ohm resistor on host Board
3. Internally AC coupled, but requires a 100 Ohm differential termination at or internal to Serializer/
Deserializer.
4. These are 20%~80% values


Produktspezifikationen

Marke: Netgear
Kategorie: Kabel für PCs und Peripheriegeräte
Modell: AGM731F

Brauchst du Hilfe?

Wenn Sie Hilfe mit Netgear AGM731F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kabel für PCs und Peripheriegeräte Netgear

Bedienungsanleitung Kabel für PCs und Peripheriegeräte

Neueste Bedienungsanleitung für -Kategorien-