Steiner GS3 4-20x50 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Steiner GS3 4-20x50 (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
OWNER’S MANUAL
GS3 RIFLESCOPE
CONTENTS
Introduction Page 1
Eyepiece Focusing Page 1
Windage / Elevation Adjustment Page 2
Parallax / Focus Adjustment Page 3
Steiner Plex S1 & S7 Reticles Page 4-5
Mounting the Scope Page 6
Sighting In Your Scope Page 6
Care & Maintenance Page 6
Customer Care Page 7
Heritageâ„¢ Warranty Page 9
Speciî™—cations Page 10
INTRODUCTION
Steiner is one of the largest manufacturers of high-quality
optics in the world. Steiner products represent the highest
level of precision and technology. Your GS3 riescope is
German engineered and American made for hunters who
demand the best. These scopes are optically and mechan-
ically superior to scopes that cost thousands more. The
lenses feature Steiner’s proven CAT (Color Adjusted Trans-
mission) technology that let you see deer and other game
before they see you by enhancing the contrast between
greens and browns. This manual outlines the basic opera-
tion and maintenance of the scope.
EYEPIECE FOCUSING
The eyepiece can be focused so that the reticle appears
sharp and black to your eyes. Adjusting the focus is quick
and easy to do. Just follow this procedure.
1. Point the scope at the sky or a plain wall and take a
quick glance through the scope. If the reticle appears
sharp and black, no further adjustment is necessary.
2. If not, use quick glances through the scope while
rotating the focus ring until the reticle is sharp and clear.
NOTE: Do not look through the eyepiece as you turn the
focus ring. Your eyes will adjust to the out-of-focus condition.
Objective Lens
Power Ring
Eyepiece Focus
Elevation Knobs
1
Windage Knobs
30mm Tube
Parallax Adjustment
(4-20X50 only)
WINDAGE / ELEVATION ADJUSTMENT
The windage and elevation knobs are designed for precise
adjustment. The dials are calibrated so that 1 click = 1/4 MOA.
The windage knob is located on the right side of the tube
and elevation is on the top.
Elevation Adjustment:
Use the turret on the top of the scope to adjust the elevation.
For proper adjustment, shoot a 3-5 shot group. If your group is
low, turn knob counter-clockwise to raise the point of impact.
If your group is high, turn the knob clockwise.
Windage Adjustment:
The turret on the right side of the scope is used for adjusting
for windage. If your 3-5 shot group is hitting to the left of
center, turn the knob counter-clockwise. If your group is
hitting to the left of center, turn the knob clockwise.
After adjusting the Windage and Elevation, shoot another
group and continue to î™—ne tune your adjustment until your
2


Produktspezifikationen

Marke: Steiner
Kategorie: Nicht kategorisiert
Modell: GS3 4-20x50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Steiner GS3 4-20x50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Steiner

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-