Sony RDP-X80iP Bedienungsanleitung

Sony Lautsprecher RDP-X80iP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony RDP-X80iP (3 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on the
apparatus.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the
like for a long time.
As the main plug is used to disconnect the unit from the
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even
if the unit itself has been turned off.
The nameplate and important information concerning
safety are located on the bottom exterior of main unit
and on the surface of AC power adaptor.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same type.
Notice for customers: the following information is
only applicable to equipment sold in countries
applying EU directives
The manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters
please refer to the addresses given in separate service or
guarantee documents.
The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the
countries EEA (European Economic Area).
Features
• Compatible with iPod/iPhone
• Rechargeable battery for portable use
• Audio in function
• Wireless remote commander supplied
Precautions
• Operate the unit on the power source specified in
“Specifications.”
• To disconnect the AC power cord (mains lead), pull it
out by the plug, not the cord.
• Since a strong magnet is used for the speaker, keep
personal credit cards using magnetic coding or spring-
wound watches away from the unit to prevent possible
damage from the magnet.
• Do not leave the unit in a location near a heat source
such as a radiator or airduct, or in a place subject to
direct sunlight, excessive dust, mechanical vibration, or
shock.
• Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on a surface (a rug, a
blanket, etc.) or near materials (a curtain) which might
block the ventilation holes.
• Should any solid object or liquid fall into the unit,
unplug the unit and have it checked by qualified
personnel before operating it any further.
• To clean the casing, use a soft cloth dampened with a
mild detergent solution.
NOTES ON LITHIUM BATTERY
• Wipe the battery with a dry cloth to assure a good
contact.
• Be sure to observe the correct polarity when installing
the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other European countries
with separate collection systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessory: Remote Commander.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004%
lead.
By ensuring these batteries are disposed of correctly, you
will help prevent potentially negative consequences for
the environment and human health which could
otherwise be caused by inappropriate waste handling of
the battery. The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with
an incorporated battery, this battery should be replaced
by qualified service staff only.
To ensure that the battery will be treated properly, hand
over the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment.
For all other batteries, please view the section on how to
remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
4-182-698- (2)82
Personal Audio
Docking System
RDP-X80iP
©2010 Sony Corporation Printed in China
Operating Instructions
Preparing a power source
Charge the rechargeable battery before using this unit for
the first time, or when the battery is depleted. You can
operate the unit while charging.
1 Connect the AC power cord (supplied) to the AC
power adaptor (supplied).
2 Connect the AC power adaptor to the DC IN 20V
jack on the back of this unit firmly and plug it into a
wall outlet.
AUDI O IN DC IN 20V
AC power
adaptor
AC power
cord
To wall
outlet
Note on the AC power adaptor
• Use the Sony supplied AC power adaptor only. The polarity of the
plugs of other manufactures may be different. Failure to use the
supplied AC power adaptor may cause the unit to malfunction.
3 Confirm that charging has started.
When charging start, the battery indicator appears.
While charging, the charging indicator animation
loops.
When the unit is turned off
When charging completes, the full battery indicator
appears for a while, and then disappears.

Notes
• If you connect the AC power adaptor when the battery is fully
charged, the full battery indicator appears for a while, and then
disappears.
• If you connect the AC power adaptor when the battery power is low,
charging starts and the low battery and charging indicator
animation loops.
The unit cannot perform operations without the AC
power adaptor while the low battery indicator
appears.
 
When the unit is turned on
When charging completes, the full battery indicator
appears.
Note
• It will take approximately 7 hours to charge the battery.
Power sources
Using the rechargeable
battery
You can operate the unit with the rechargeable battery
instead of the AC power adaptor.
Note
• The maximum output will be lower when the AC power adaptor is
disconnected.
To check the remaining power of the
battery
The remaining power of the battery will be indicated
when the unit is turned on. As the remaining battery
power depletes, the battery indicator decreases.
Level 1 Level 2 Level 3 Level 4
When the battery becomes almost fully depleted, “LOW
BATT” flashes and the unit will turn off. To charge the
battery, connect the AC power adaptor. ( See “Preparing
a power source.”)
 
Notes
• The remaining battery power will not be indicated when the unit is
turned off.
• The unit requires at least 30 minutes to charge the battery if “LOW
BATT” appears.
• The battery indicator shows approximate remaining battery power.
• Operating conditions will affect the rate of battery depletion.
Battery life
When Battery life
Playback of iPod approx. 7hours*
Measured in accordance with the JEITA (Japan
Electronics and Information Technology Industries
Association) standard.
* Playback time measured using a fully charged rechargeable battery
with a fully charged iPod classic.
When to replace the rechargeable
battery pack
Repeated recharging causes the capacity of the
rechargeable battery power to decrease over time. Replace
the rechargeable battery pack when its capacity becomes
half the usual time, even after charging the battery fully.
Note
• The rechargeable battery pack is not a commercially available
product. To purchase a rechargeable battery pack (NH - 2000 RDP),
consult with your nearest Sony dealer.
Replacing the rechargeable
battery pack
1 Slide the latch to , and slide in UNLOCK RELEASE
the direction of the arrow on the bottom of this unit.
The battery compartment cover opens, then remove
the cover.
2 Use a coin, etc., to pull out the rechargeable battery
pack.
3
Remove the rechargeable battery pack and disconnect
the lead from the jack inside the battery compartment.
4 Connect the lead of a new rechargeable battery pack
to the jack and insert the battery in the unit.
5 Close the battery compartment cover and slide the
latch to .LOCK
1
2
3
4
5
Notes
• Charge a new battery pack before use. See “Preparing a power
source” for details.
• Turn off the unit, before replacing the rechargeable battery pack.
• When replacing the rechargeable battery pack, place a soft cloth,
etc., under the unit.
Preparing the remote
commander
Before using the remote commander for the first time,
remove the insulation film.
To know when to replace the battery
With normal use, the battery (CR2025) should last for
about 6 months. When the remote commander no longer
operates the unit, replace the battery with a new one.
CR2025
Notes
• Do not attempt to charge the battery.
• If you are not going to use the remote commander for a long time,
remove the battery to avoid any damage that may be caused by
leakage and corrosion.
Operations
Display
Remote sensor
Docking Tray
VOL + and on the unit and the remote commander have a tactile dot.
Before using the unit
To turn on/off the power
Press (power).
 (power) button indicator will light up in green when
the unit is turned on.
To adjust the volume
Press VOL +/−.
Note
• While the unit is turned off, only the (power) button will 
function.
Power management system
After playback of the iPod (or component connected to
AUDIO IN jack) has finished, if no operation is
performed for about 20 minutes, the unit will
automatically turn off.
Notes
• While the unit is turned on, if no operation is performed for more
than about 30 seconds, the display turns off. In this case, press
DISPLAY to turn on the display again.
• The unit cannot be turned on with the remote commander when the
AC power adaptor is disconnected.
Power off hold function
You can set the power off hold function in order to avoid
unintentional powering on while carrying the unit.
To set the power off hold function
Press and hold (power) when the AC power adaptor 
is disconnected.
“HOLD” flashes 2 times and the display turns off. The
unit cannot be turned on by pressing (power) while 
the power off hold function is set.
To cancel the power off hold function
Press and hold (power).
“RELEASE” flashes 2 times and the power off hold
function is canceled. The unit will turn on automatically.
Tip
• The power off hold function will be canceled if you connect the AC
power adaptor to the unit.
To Press
Turn off the iPod Press and hold
.
Pause playback
To resume play,
press again.
Go to the next track (forward)
Go back to the previous
track
(backward)*
Locate a point while
listening to the sound
(forward) or
(backward)
while playing and
hold until you
find the point.
Locate a point while
observing the display on
iPod
(forward) or
(backward)
in pause and hold
until you find the
point.
Go back to the previous
menu
MENU
Select a menu item or a
track for playback
  (up)/ (down)
Execute the selected menu
item or begin playback
ENTER
* During playback, this operation returns you to the
beginning of the current track. To go back to the
previous track, press twice.
Notes
• When placing or removing the iPod, hold the iPod at the same angle
as that of the connector on this unit, and do not twist or bend the
iPod as connector damage may result.
• Do not carry the unit with an iPod set on the connector. Doing so
may cause a malfunction.
• When placing or removing the iPod, hold the Docking Tray
securely.
• Before disconnecting the iPod, pause playback.
On copyrights
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
“Made for iPod,” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
To use this unit as a battery charger for
your iPod
You can use the unit as a battery charger for your iPod.
Charge your iPod when the AC power adaptor is
connected.
The charging status appears in the display of iPod. For
details, see the user’s guide of your iPod.
Tip
• You can also charge your iPod without the AC power adaptor by
pressing to select “iPod” when the battery indicator FUNCTION
shows Level 1 or Level 2.
To set the iPod
1 Press PUSH OPEN on the Docking Tray at the front
of this unit to open.
The tray clicks to lock at the open position.
2 Attach the adapter for your iPod/iPhone.
3 Set your iPod/iPhone in the tray.
Tip
• Remove the case or cover from your iPod before setting it in the tray
to ensure a stable connection.
To close the Docking Tray
Press and hold LOCK RELEASE on the corner of the
Docking Tray and close the tray.
Operating an iPod
1 Press (power).
2 Press FUNCTION repeatedly until “iPod” appears in
the display.

3 Press .
The iPod begins to play back.
You can operate the connected iPod by this unit or the
buttons on iPod.
Opening/closing the Docking
Tray
You can enjoy audio from iPod by setting it in the
Docking Tray of this unit.
When setting an iPod in the unit, be sure to use the
supplied universal dock adapter with your iPod or
commercially available products from Apple Inc.
If you are using an iPhone, iPhone 3G, iPhone 3GS or
iPhone 4, attach the supplied universal dock adapter for
iPhone, iPhone 3G, iPhone 3GS or iPhone 4 before
connecting.
The adapter number, , or , is shown on the  
underside of the supplied universal dock adapters. is
for the iPhone, is for the iPhone 3G & iPhone 3GS
and is for the iPhone 4. Check the adapter number
before use.
 
Universal Dock Adapter
Notes
• To use an iPod, refer to the user’s guide of your iPod.
• The connector of the unit is exclusively for use with an iPod. If you
use a device that does not match the connector, connect it to the
AUDIO IN jack of this unit with the supplied audio connecting
cable.
• Sony cannot accept responsibility in the event that data recorded on
an iPod is lost or damaged when using an iPod connected to this
unit.
• For details of environmental conditions for operating your iPod,
check the website of Apple Inc.
Connecting optional
components
You can enjoy the sound from an optional component
such as a portable digital music player through the
speakers of this unit. Be sure to turn off the power of
each component before making any connections. For
details, refer to the instruction manual of the component
to be connected.
1 Connect the AUDIO IN jack on the back of the unit
to the line output jack of the portable digital music
player or other component using an audio connecting
cable.
2 Press (power) to turn on the unit.
3 Turn the connected component on.
4 Press FUNCTION repeatedly until “AUDIO IN”
appears in the display.
The sound from the connected component is output
from the speakers of this unit.
AUDI O IN DC IN 20V
Audio connecting
cable (supplied)
To external
equipment
Notes
• Refer also to the connected equipment’s manual.
• The supplied audio connecting cable may not be usable with some
external equipment. In this case, use a cord suitable for the external
equipment you are using.
• If you listen to the radio with external equipment connected, turn
off the connected equipment to prevent noise. If noise occurs, even
when the equipment is turned off, disconnect and place the external
equipment away from the unit.
Selecting audio emphasis
(equalization)
You can adjust the emphasis of the sound.
Press repeatedly to select the desired audio SOUND
emphasis.










Troubleshooting
General
The power will not turn on when the AC power
adaptor is connected.
• Make sure the AC power adaptor is connected to the wall outlet
firmly.
The power will not turn on when the AC power
adaptor is disconnected.
• The power off hold function may be set. In this case, cancel the
power off hold function. (See “Power off hold function.”)
• The rechargeable battery may be depleted. In this case, connect to
the AC power adaptor to charge the battery. (See “Preparing a power
source.”)
The buttons on the unit do not function.
• When the unit is turned off, only the (power) button functions. 
Turn on the unit before operation.
The rechargeable battery is depleted.
• Connect to the AC power adaptor to charge the battery.
There is no audio.
• Adjust the .VOL +/−
Noise is heard.
• Ensure that the unit is not in the vicinity of in-use portable phones,
etc.
The display turns off.
• If no operation is performed for more than 30 seconds, the display
turns off. Press DISPLAY to turn on the display again.
“ERROR” appears in the display and the unit turns off
automatically.
• If this symptom occurs frequently, consult your nearest Sony dealer.
iPod
There is no audio.
• Make sure the iPod is connected firmly.
Operation is not performed.
• Make sure the iPod is connected firmly.
The iPod cannot be charged when the AC power
adaptor is disconnected.
• You cannot charge the iPod when the battery power of the unit is
low.
The Docking Tray cannot be closed.
• Press and hold the while closing the Docking Tray.LOCK RELEASE
Remote
The remote does not function.
• The unit cannot be turned on with the remote commander when the
AC power adaptor is disconnected. In this case, press
 (power) on the unit to turn on.
• Replace the battery in the remote commander with a new one if it is
weak.
• Make sure that you are pointing the remote at the remote sensor on
the unit.
• Remove any obstacles in the path of the remote and the unit.
• Make sure the remote sensor is not exposed to strong light such as
direct sunlight or fluorescent lamp light.
• Move closer to the unit when using the remote.
If the problem persists, consult your nearest Sony dealer.
Specifications
Section for iPod
DC out: 5V
MAX: 500mA
General
Speaker
Approx. 7.6 cm dia. 4 Ω
Input
AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output
20 W + 20 W (at 1% harmonic distortion)
(With the AC power adaptor)
Power requirements
Rechargeable battery pack:
NH - 2000 RDP
Battery life
See “Battery life” of “Using the rechargeable battery” for
details.
External power source
DC IN 20V
Dimensions
Approx. 356.0 mm × 162.8 mm × 119.7 mm (w/h/d)
Mass
Approx. 1.9 kg
Supplied accessories
Remote commander (1)
AC power adaptor (1)
AC power cord (1)
Audio connecting cable (1)
Universal Dock Adapter for iPhone (1)
Universal Dock Adapter for iPhone 3G & iPhone 3GS (1)
Universal Dock Adapter for iPhone 4 (1)
Design and specifications are subject to change without
notice.
Compatible iPod/iPhone
models
Compatible iPod/iPhone models are as follows. Update
your iPod/iPhone to use the latest software before you
use it.
iPod touch
3rd generation
iPhone 3GS
iPod
5th generation
(video)
iPod nano
2nd generation
(aluminum)
iPod mini
iPod nano
5th generation
(video camera)
iPhone
iPhone 4
iPod classic
iPod nano
3rd generation
(video)
iPod
4th generation
iPod touch
1st generation
iPod touch
2nd generation
iPhone 3G
iPod
4th generation
(color display)
iPod nano
1st generation
iPod nano
4th generation
(video)
Notes
• In these Operating Instructions, “iPod” is used as a general reference
to iPod functions on an iPod or iPhone, unless otherwise specified
by the text or illustrations.
• The connector of the unit is solely for use with an iPod. If you use
devices that do not have the same connector, connect to the AUDIO
IN jack of this unit with the supplied audio connecting cable.
• Sony cannot accept responsibility in the event that data recorded to
an iPod is lost or damaged when using an iPod connected to this
unit.

Produktspezifikationen

Marke: Sony
Kategorie: Lautsprecher
Modell: RDP-X80iP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sony RDP-X80iP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Sony

Sony

Sony SS-RX900 Bedienungsanleitung

7 Oktober 2024
Sony

Sony SS-X9S Bedienungsanleitung

19 September 2024
Sony

Sony ULT FIELD 1 Bedienungsanleitung

3 September 2024
Sony

Sony ULT FIELD 7 Bedienungsanleitung

3 September 2024
Sony

Sony LMD-B240 Bedienungsanleitung

1 September 2024
Sony

Sony SCA-S30 Bedienungsanleitung

27 August 2024
Sony

Sony ALT-SA34R Bedienungsanleitung

24 August 2024
Sony

Sony SRS-XB100 Bedienungsanleitung

19 August 2024
Sony

Sony SRS-XV800 Bedienungsanleitung

17 August 2024
Sony

Sony HT-S2000 Bedienungsanleitung

17 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024