Skytec ST-010 Bedienungsanleitung

Skytec DJ Ausrüstung ST-010

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Skytec ST-010 (11 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/11
ST010 Personal PA Wireless System
Ref. nr.: 178.869
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUEL D'INSTRUCTIONS
V1.0
2
ENGLISH
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the unit in order to
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his unit is with speaker inside which can cause If t
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- his unit is with built-in lead-acid rechargeable battery. If t
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
Description of the amplier:
1.Volume Control
2.Tone Control
3.Audio Output
4.USB socket
5.Wired mic input
6.Power On/O
A. Operation of the Amplier:
Firstly, make sure the amplifier is available in the current power voltage.
1. Using AC power supply:
Connecting with AC power, please switch to POWER ON position, and the power indicator turns green ,it
shows the amplier works normally(If suddenly AC power is cut o, the built in rechargeable will supply –
power automatically);
2. Using DC power supply:
Switch to POWER ON position, and the power indicator turns green, it works normally, it has a low power
warning set, if it’s low battery, it will provides a “BEEP” sound to inform the users to charge the amplifier.
Caution: Please switch to POWER OFF position when you nish using the amplier, o wise, it will inuence “ ” ther
battery life span.
B. Operation of wireless transmitter:
1. Open the cover, install the battery with correct polarity then close the
cove.
2. Switch to ON position, the indicator ash up then black out ,it means
can work normally ,please turn o the power after using it.
3. The best way to set the voice volume of amplier to half position and
then you can adjust the volume to meet your needs.
Caution:
1. If the transmitter is ON, but the LED indictor is dim or o, it means the battery is low or you have
placed the battery wrong polarity.
2. od. Please take out the battery if you do not want to use it for a long peri
Operation BT-Technology:
Press button to switch on the -function. Then use your mobile phone or computer to search a BT-“MODE” BT
device and connect the ST010 with your device.
TROUBLESHOOTING:
The problems might be
Reasons and Resolutions
The power indicator is dim
It indicates the battery low, please change to AC supply and
charge it immediately;
Hash Howl
1 Turn down the volume of amplier ．
2. Turn the tone control to Bass
3. Adjust the distant between amplier and microphone ,do not
face the speaker of amplier while using it
Noise
1 Battery low of the amplier or transmitter; ．
2. The microphone cord might be damaged;
3.Interference by same frequency ; (201.400MHz)

Produktspezifikationen

Marke: Skytec
Kategorie: DJ Ausrüstung
Modell: ST-010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec ST-010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung DJ Ausrüstung Skytec

Skytec

Skytec ST-010 Bedienungsanleitung

18 August 2024
Skytec

Skytec SPL700EQ Bedienungsanleitung

16 August 2024
Skytec

Skytec 54 kanaals DMX controller Bedienungsanleitung

15 August 2024
Skytec

Skytec SMWX Serie Bedienungsanleitung

15 August 2024
Skytec

Skytec STM-7010 Bedienungsanleitung

14 August 2024
Skytec

Skytec TEC 070 Bedienungsanleitung

14 August 2024
Skytec

Skytec 6 channel mixer Bedienungsanleitung

14 August 2024
Skytec

Skytec SPJ-PA12 Bedienungsanleitung

12 August 2024
Skytec

Skytec SP1000 Hi-End PA-box Bedienungsanleitung

11 August 2024
Skytec

Skytec STX-110 Bedienungsanleitung

10 August 2024

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-

Line 6

Line 6 HX Effects Bedienungsanleitung

15 Oktober 2024
Korg

Korg DT-10 Bedienungsanleitung

8 Oktober 2024
Tascam

Tascam XS-3 Bedienungsanleitung

2 Oktober 2024
Audio-Technica

Audio-Technica AT-VM95EN Bedienungsanleitung

29 September 2024
Behringer

Behringer CMD DC-1 Bedienungsanleitung

28 September 2024
Korg

Korg OT-120 Bedienungsanleitung

27 September 2024
Korg

Korg DTR-2000 Bedienungsanleitung

26 September 2024
Festo

Festo CPX-E-CEC-M1 Bedienungsanleitung

24 September 2024
BeamZ

BeamZ StarFuzer Bedienungsanleitung

24 September 2024
Focusrite

Focusrite Clarett 4Pre USB Bedienungsanleitung

23 September 2024