Seymour Duncan WOODY Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Seymour Duncan WOODY (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
WOODYTM
SOUND HOLE PICKUPS
FOR STEEL STRING ACOUSTIC GUITARS
INSTALLATION AND OWNER’S MANUAL
INTRODUCTION
Congratulations on your purchase of a Seymour Duncan WoodyTM These
pickups have been crafted specifically to fill the needs of the acoustic
guitarist. You do not need to use a preamplifier with these products to get a
good sound. Every feature has been carefully chosen to give you a warm
natural sound of unusual quality for a magnetic sound hole pickup.
There are three members of the Woody family, a single coil design (SC), a
hum canceling Stack® (HC), and the XL, a pro model Stack
® with adjustable
pole pieces. The Woodys are fashioned from beautifully finished select
maple or beech to compliment and enhance the appearance of your instru-
ment. They will fit in guitar sound holes measuring 3.75” (95 mm) to 4” (102
mm). The shaped magnetic field insures great string balance with most
acoustic string sets. Each pickup has its own uncommonly warm signature
sound, with the SC being full and clear, the HC displaying rich articulation,
and the XL in a professional class of its own.
Every Woody comes ready to play with a studio quality 14’ cable. The Woody
XL comes complete with an Allen wrench and an extra pole piece for the G
string. If you use a solid G string you’ll want to replace the stock pole piece
to get a better string to string balance.
INSTALLATION
1) Orient the Woody so the cable exits towards the bridge
2) Slip the Woody into the sound hole on the high E string side
3) Hook one edge of the Woody on the sound hole on the low E side
4) Push the Woody towards the bass strings until the bottom lip clears the
sound hole on the low E side
5) Allow the Woody to spring into place, capturing the sound hole on the
high E side
6) Adjust the height on the bass and treble side to taste
7) Adjust the pole piece heights if needed (XL only). The setup should be
pretty close right out of the bag. Avoid radical setting of the pole pieces for
best hum cancellation. The pole piece heights for the B and high E strings
should generally be below the surface of the pickup, with the rest of the pole
pieces flush or slightly elevated.
8) Plug in and wail!
SC
Single Coil
HC
Hum Cancelling STACK
®
XL
Pro Model STACK
®
w/ adjustable pole pieces
Figure 1 Figure 2
WARRANTY
Seymour Duncan workmanship and materials are the finest available, so we offer the
original purchaser a two year warranty on both from the day you buy your pickup.
We will repair or replace this pickup, at our option, if it fails due to faulty workman-
ship or materials during this period. Defective pickups should be returned to your
dealer or sent to the factory postage prepaid along with proof of purchase.
This warranty does not apply to damage to your instrument or the pickup caused
by misuse, mishandling, or installation. Seymour Duncan reserves the right to be
the sole judge as to the misuse or abuse of the product. The company assumes no
liability for incidental or consequential damages which may result from the failure of
this product. Any warranties implied by law are limited to the duration of this express
limited warranty.
Date of Purchase
Dealer
KEEP YOUR BILL OF SALE IN A SAFE PLACE.
IMPORTANT NOTE:
Installation in small bodied guitars with sound holes smaller than 3.8” can be
made much easier by following these simple steps.
1) Pull out the foam in the slots on both sides of the pickup
2) Cut each piece of foam in half along its length
3) Reinstall the foam pieces in the slots. Tack them back in place with a drop
of KrazyTM Glue on the edge of the foam
4) In extreme cases the lower lip of the pickup on the treble side may be filed
or sanded down for increased clearance on installation
5427 Hollister Avenue
Santa Barbara, CA 93111-2345
Ph: (805) 964-9610 • Fax: (805)964-9749
www.seymourduncan.com
Figure 3
Tilted for more high string response
E GB D A E
Aligned for even response
Tilted for more bass string response
© 2004 Seymour Duncan P/N 502050-120 Rev. B
We hope that you enjoy your new Woody. The natural sound of an electrified
acoustic guitar is an enjoyable and thriving part of the music tradition. Thank
you for selecting our product to complement your instrument. Let us know if
you have any questions, suggestions, or just want more information on our
other acoustic and electric products. We’d like to hear from you.


Produktspezifikationen

Marke: Seymour Duncan
Kategorie: Nicht kategorisiert
Modell: WOODY

Brauchst du Hilfe?

Wenn Sie Hilfe mit Seymour Duncan WOODY benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Seymour Duncan

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-