Seymour Duncan 805 Overdrive Bedienungsanleitung

Seymour Duncan niet gecategoriseerd 805 Overdrive

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Seymour Duncan 805 Overdrive (8 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
- 8 0 5 -
O v e r d r i v e P e d a l
U S e r ’ S G U i d e
Congratulations, and thank you for your purchase of the Seymour Duncan 805 Overdrive™ Pedal!
The 805 is a very transparent, classic Overdrive pedal designed using the legendary 808 chip as a
starting point but with an expanded gain range and 3-band active EQ that is not commonly found
in 808 style overdrive pedals.
The gain range extends from 8dB to 36dB, allowing for a wide range of overdrive options from
mild boost to saturated lead gain . The active EQ circuit is designed to allow players full access to
be able to fine-tune all elements of the low, mid and high frequency content.
Typical applications for the 805 Overdrive include:
• Use for frequency contouring. Set up a frequency response that works well for
saturated overdrive sounds.
• Use to boost level into single channel or clean amps to push them into overdrive and
create essentially two channels.
• Use the pedal’s own smooth distortion to create a rich, saturated tone even at lower
volume levels, with amps that don’t have separate gain and master knobs.
H O W I T W O R K S
1 Level - Sets the overall level of your signal. W
the wide gain range available you can dial in th
based on how much crunch you dial in with the
knob. The cleaner (lower) the gain, the higher t
should be and vice versa.
2 Drive - Regulates the amount of gain the 80
Overdrive is putting out. Low settings will provi
very slightly overdriven, boosted tone. Increasin
Drive pushes the front end of your amp harder,
depending on the output of your pickups will st
add some rich distortion anywhere from 9 o’clo
higher-output humbuckers, to 11-12o’clock for th
output, more vintage type pickups. Gain range
805 Overdrive is a versatile 8dB to 36dB provid
wide, flexible tonal palette.
3 Bass - Active control provides +/- 11dB of bo
cut at 90hz. Turn clockwise for thunderous low
to fatten up an open-back cabinet, counter-clo
to clean up closed-back cabinets that may be t
bass-heavy for the venue or style of music.
4 Mid - Active +/-11dB of boost or cut at 750h
From 12 o’clock, turn clockwise to boost the
mids for more presence, counter-clockwise
to cut the mids for a more scooped tone.
1
3
2
5
7
8 9
4
11
(on back panel)
6
10

Produktspezifikationen

Marke: Seymour Duncan
Kategorie: niet gecategoriseerd
Modell: 805 Overdrive

Brauchst du Hilfe?

Wenn Sie Hilfe mit Seymour Duncan 805 Overdrive benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Seymour Duncan

Seymour Duncan

Seymour Duncan YJM-500 Bedienungsanleitung

24 August 2024
Seymour Duncan

Seymour Duncan 805 Overdrive Bedienungsanleitung

24 August 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

APC

APC C2C Bedienungsanleitung

18 September 2024
APC

APC AP7868 Bedienungsanleitung

18 September 2024
APC

APC P8VNTG Bedienungsanleitung

18 September 2024
APC

APC P62 Bedienungsanleitung

18 September 2024
APC

APC AP7898 Bedienungsanleitung

18 September 2024
Hama

Hama Magnet 00183283 Bedienungsanleitung

18 September 2024
IFM

IFM TD2211 Bedienungsanleitung

18 September 2024
Coyote

Coyote C1CH36FS Bedienungsanleitung

18 September 2024
IFM

IFM AC001S Bedienungsanleitung

18 September 2024
Dimplex

Dimplex SRX120EM Bedienungsanleitung

18 September 2024