Sennheiser BW 900 Bedienungsanleitung

Sennheiser Kopfhörer BW 900

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sennheiser BW 900 (6 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

Safety information

The headset is capable of

producing high sound pressure

levels that may cause permanent

hearing damage. Please avoid

listening at high volume levels.

Never disassemble or modify

components of the BW 900

system!

Use the BW 900 system in dry

rooms only and keep liquids and

small electrically conductive parts

away from it. Only to be used

with Sennheiser Communications

supplied approved and certiﬁ ed

power supply (EU 094707,

UK 092892, US 092893,

AUS 520334).

For cleaning the BW 900 system,

use a dry cloth only. Do not use

any solvents or cleansing agents.

Sennheiser Communications

does not accept any liability for

damage arising from the loss of

connection due to a ﬂ at battery or

the like or an exceeded transmit-

ting range.

If you combine the BW 900 sys-

tem with any accessories such as

a handset lifter, follow the instruc-

tions supplied with them.

왘

Safety information on recharge-

able batteries:

Only charge at ambient tempera-

tures between 10 °C (50 °F) and

40 °C (104 °F).

Only charge in the BW 900 base

station! Never try to charge bat-

teries other than those supplied

with the BW 900 headset in the

base station!

Do not short-circuit or expose to

moisture.

Keep away from children.

When not using rechargeable

batteries for extended periods

of time, charge them regularly

(about every three months).

Do not continue to use defective

rechargeable batteries. Immedi-

ately remove rechargeable bat-

teries from obviously defective

devices.

Do not heat above 70 °C (158 °F)

or incinerate!

Dispose of according to the laws

and regulations of your country.

왘

•

Intended use

The BW 900 system is an accessory

for ﬁ xed-line and mobile phones,

allowing for wireless communication

in ofﬁ ce and home ofﬁ ce

applications.

Improper use

“Improper use” means using the

BW 900 system other than as

described in these instructions, or

under operating conditions which

differ from those described herein.

ENGLISH

BW 900 base station

operating elements

 Headset/handset switch

 Base station hook button

 Headset charging LED

 Spare battery charging LED

 Hook LED

 Mute LED

 Spare battery charging slot

 Headset cradle

 Program button

 Microphone volume knob

 Telephone adjustment switch

 HANDSET socket

 PHONE socket

 ACCESSORIES socket

 DC IN socket

BW 900 headset operating

elements

 Microphone boom

 Hinged speaker

 Multi switch

 Headset hook button

 Battery compartment

 Headset LED

 Speaker adapters

For more detailed information

on setting up and operating the

BW 900 system, please refer to

the manual provided as PDF on

CD.

Connecting the base

station to the telephone

Disconnect the ofﬁ ce phone hand-

set A with its cable from the

ofﬁ ce phone, but leave the hand-

set on the phone.

Plug the free handset cable con-

nector to the HANDSET socket 

of the base station.

The phone connecting cable is

already connected to the PHONE

socket . Connect the other end

of this cable to the socket on

the ofﬁ ce phone from where the

handset cable was removed.

Connect the power supply C to

the DC IN socket  and to the

mains.

All LEDs light up for 2 seconds.

If you wish to connect a handset lif-

ter B, connect it to the ACCESSORIES

socket  as described in the handset

lifter manual. If you wish to connect

a PC, refer to the manual provided

as PDF on CD or www.senncom.

com/bw900.

Setting up the headset

Insert the battery into the head-

set. The headset LED  ﬂ ashes

blue three times, indicating that

the headset is switched on.

If the headset does not switch on

automatically, see “Charging the

battery” and “Switching on/off”

on page 4.

Expand the speaker .

Put the headset on your right or

left ear.

Close the speaker for a ﬁ rm ﬁ t.



If the pre-assembled medium size

earpeace adapter  does not ﬁ t

your ear, exchange the earpeace

adapter for a larger or smaller

one.

Turn the microphone towards

your mouth.

Testing the setup

Release the headset/handset

switch  to the “up” position.

Pick up the handset A from your

ofﬁ ce phone. If a dial tone is

heard in the handset, the system

is connected properly. If no dial

tone is heard, please refer to the

section “Adjusting the system to

your ofﬁ ce phone“ on page 3.

Adjusting the system to your

of ce phone

Press the headset/handset

switch  to the “down” position.

Put on the headset and adjust it

for comfort.

Press either the headset hook

button  or the base station

hook button .

Adjust the telephone adjustment

switch  to A, B or C so that the

dial tone can be heard loud and

clear in the BW 900 headset.

Turn the microphone volume

knob  to position 1.

Pick up the handset from your

ofﬁ ce phone and hold it to your

other ear.

Make a test call to someone who

will help you to ﬁ nd the cor-

rect sensitivity setting for your

microphone.



Speak to the other party by

alternately using the handset

(headset/handset switch  is in

the “up” position) and the head-

set (headset/handset switch  is

in the “down” position), always

starting with the handset.

While the headset/handset

switch  is in the “down” posi-

tion, turn the microphone volume

knob . The setting is correct

when the other party hears you

at the same volume, irrespective

of whether you use the headset

or the handset.

To adjust the speaker volume,

push the multi switch  in the

“up” or “down” direction.

To end the call, press either the

headset hook button  or the

base station hook button  and

hang up the handset.

Pairing the headset to a

mobile phone

Simultaneously press and hold

the headset hook button  and

the multi switch  (in the “push”

direction) until the headset

LED  alternately ﬂ ashes red and

blue.

Start a search for Bluetooth de-

vices on your mobile phone (see

the mobile phone manual).

If your mobile phone prompts

for a keyword, enter four zeros

(0000).

If no connection is established within

60 seconds, the headset automati-

cally returns to standby mode.



ENGLISH

Produktspezifikationen

Marke:	Sennheiser
Kategorie:	Kopfhörer
Modell:	BW 900
Bluetooth:	Ja
Bluetooth-Version:	1.2
Gewicht:	26 g
Produkttyp:	Kopfhörer
Headset-Typ:	Monophon
Übertragungstechnik:	Kabellos
Mikrofon Stummschaltung:	Ja
Kabellose Reichweite:	100 m
Kopfhörer-Empfindlichkeit:	104 dB
Gesprächszeit:	5 h
Kompatibilität:	Telefon