SE Electronics sE8 Bedienungsanleitung

SE Electronics Mikrofon sE8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SE Electronics sE8 (24 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
sE8
U s e r M a n u a l
2
User Manual - EN
Thank Y ou
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few
minutes to read the instructions below carefully. We hope you will enjoy working with it as much
as we enjoyed designing and building it for you.
Most Sincerely,
Your sE Team
Brief Description
The sE8 is a high-quality small diaphragm condenser microphone intended for a wide range of
studio and live sound applications, from acoustic guitars to pianos to drums and beyond. Thanks
to its custom design, hand-crafted true condenser capsule, and transformerless output, it delivers
pristine sound quality and an even, well-balanced frequency response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high
sound pressure level (SPL) handling capability and extremely low-noise components. The
switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an
excess of bass frequencies caused by the proximity effect. This enables the sE8 to close-mic
many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by
the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.
What’s in the box
Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
sE8 (Single)
• sE8 microphone
• mic clip (with thread adapter)
• wind screen
sE8 (Matched Pair)
• 2x sE8 microphone
• 2x mic clip (with thread adapters)
• 2x wind screens
• stereo bar
• metal case
Controls
The sE8 features a switch for the attenuation pads and a switch for the low-cutfilters.
Attenuation Switch
The Attenuation Switch is located on the upper back side of the
microphone. When switched on, the incoming signal is reduced by
either 10 or 20 dB for capturing of loud instruments and/or close-
miking without distortion. Using the switch also helps prevent
overloading the input stage of recording interfaces, mixing desks and
microphone preamps.
3
Low-Cut Switch
The Low-Cut Switch is located on the front-right side of the
microphone, and inserts a low-cut filter at 80Hz (top position) or
160Hz (bottom position). The switch’s center position removes the
filter for a flat frequency response. Wind noise, plosives, footfall noise
or rumble might affect the recorded signal, so enabling the low-cut
filters reduces such unwanted noise and prevents distortion.
Additionally, the low-cut filters also minimize the proximity effect
when recording sound sources at a very short distance.
Powering
To ensure proper operation, the microphone requires a phantom power source providing 48 Volts
according toIEC 61938.
Risk of damage
Do not connect the microphone to any power supply other than a
phantom power source (input with phantom power or external IEC
standard phantom power supply) with a floating connector, using a
balanced cable with studio grade connectors to IEC 268-12 only. This is
the only way to ensure safe and reliable operation.
Safety and maintenance
Risk of damage
Please make sure that the piece of equipment to which your microphone
will be connected fulfils the safety regulations enforced in your country
and is fitted with a ground lead.
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specification
Capsule
Hand-crafted small diaphragm true condenser capsule
Polar patterns
Cardioid
Frequency range
20 – 20,000 Hz
Sensitivity
25 mV/Pa (-32 dBV)
Max. SPL (0.5% THD)
139 / 149 / 159 dBSPL(0/10/20 dB Attenuation pad)
Equivalent noise level
13 dB(A)
Dynamic range
126 / 136 / 146 dB (0/10/20 dB Attenuation pad)
Signal- -noise ratio to
81 dB
Low cut filter
80 / 160 Hz, 6 dB/Oct, switchable

Produktspezifikationen

Marke: SE Electronics
Kategorie: Mikrofon
Modell: sE8

Brauchst du Hilfe?

Wenn Sie Hilfe mit SE Electronics sE8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon SE Electronics

SE Electronics

SE Electronics V7 BFG Bedienungsanleitung

6 September 2024
SE Electronics

SE Electronics V7 V3 Bedienungsanleitung

6 September 2024
SE Electronics

SE Electronics T1 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics DM2 TNT Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics V7 MC2 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics V7 MC1 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics VR2 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics Harp Blaster HB52 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics Gemini II Bedienungsanleitung

21 August 2024
SE Electronics

SE Electronics sE2300 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024