SE Electronics sE2200 Bedienungsanleitung

SE Electronics Mikrofon sE2200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SE Electronics sE2200 (24 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
1
sE2200
U s e r M a n u a l
2
User Manual - EN
Thank you
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few
minutes to read the instructions below carefully. We hope you will enjoy working with it as much
as we enjoyed designing and building it for you.
Most Sincerely,
Your sE Team
Brief Description
The sE2200 is the latest version of the fan-favorite condenser that put sE Electronics on the map
many years ago with its smooth, polished sound for vocals, voiceovers, and numerous
instrumental applications. Like its predecessors, the sE2200 is a high-quality condenser
microphone intended for a wide range of studio applications, from vocals and spoken word to
acoustic instruments to drums and beyond. Thanks to its hand-crafted large-diaphragm true
condenser capsule, shielded custom transformer and class-A circuitry (no ICs here!) it delivers
pristine, flattering sound quality, exceptionally low noise, an even, well-balanced frequency and
response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high
sound pressure level (SPL) handling capability and extremely low-noise components. The
switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an
excess of bass frequencies caused by the proximity effect. This enables the sE2200 to close-mic
many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding applications in difficult environments is ensured by the
roadworthy all-metal design, robust construction, and high-quality manufacturing standards.
What’s in the box
Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
• sE2200 microphone
• sE Isolation Pack (shock mount, pop filter)
• thread adapt er
Controls
The sE2200 features a switch for the attenuation pads and a switch for the low-cut filters.
Attenuation Switch
The Attenuation Switch is located on the front-left side of the
microphone. When switched on, the incoming signal is reduced by
either 10 or 20 dB for capturing of loud instruments and/or close-
miking without distortion. Using the switch also helps prevent
overloading the input stage of recording interfaces, mixing desks and
microphone preamps.
3
Low-Cut Switch
The Low-Cut Switch is located on the front-right side of the
microphone, and inserts a low-cut filter at 80Hz (left position) or 160Hz
(right position). The switch’s center position removes the lter for a flat
frequency response. Wind noise, plosives, footfall noise or rumble
might affect the recorded signal, so enabling the -cut filters reduces low
such unwanted noise and prevents distortion. Additionally, the low-cut
filters also minimize the proximity effect when recording sound
sources at a very short distance.
Powering
To ensure proper operation, the microphone requires a phantom power source providing 48 Volts
according to IEC 6193 8.
Risk of damage
Do not connect the microphone to any power supply other than a phantom
power source (input with phantom power or external IEC standard phantom
power supply) with a floating connector, using a balanced cable with studio
grade connectors to IEC 268-12 only. This is the only way to ensure safe
and reliable operation.
Safety and maintenance
Risk of damage
Please make sure that the piece of equipment to which your microphone
will be connected fulfils the safety regulations enforced in your country and
is fitted with a ground lead.
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specifications
Capsule
Hand-crafted 1” true condenser capsule
Polar patterns
Cardioid
Frequency range
20 20,000 Hz –
Sensitivity
23.7 mV/Pa (-32.5 dBV)
Max. SPL (0.5% THD)
125 / 135 / 145dBSPL (0/10/20 dB Attenuation pad)
Equivalent noise level
12 dB(A)
Dynamic range
113 / 123 / 133 dB (0/10/20 dB Attenuation pad)
Signal- -noise ratio to
82 dB
Low cut filter
80 / 160Hz, 6 dB/Oct, switchable

Produktspezifikationen

Marke: SE Electronics
Kategorie: Mikrofon
Modell: sE2200

Brauchst du Hilfe?

Wenn Sie Hilfe mit SE Electronics sE2200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon SE Electronics

SE Electronics

SE Electronics V7 BFG Bedienungsanleitung

6 September 2024
SE Electronics

SE Electronics V7 V3 Bedienungsanleitung

6 September 2024
SE Electronics

SE Electronics T1 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics DM2 TNT Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics V7 MC2 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics V7 MC1 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics VR2 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics Harp Blaster HB52 Bedienungsanleitung

31 August 2024
SE Electronics

SE Electronics Gemini II Bedienungsanleitung

21 August 2024
SE Electronics

SE Electronics sE2300 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024