SE Electronics DM1 Dynamite Bedienungsanleitung

SE Electronics Mikrofon DM1 Dynamite

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SE Electronics DM1 Dynamite (6 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
sE sElectronic
®
DM1
User Man ual
We would like to thank you cordially for choosing
this sE DM1! We hope you enjoy using it as much
as we enjoyed designing and building it for you.
The DM1 is an active inline preamp intended to
be inserted between a passive ribbon or dynamic
microphone and a microphone preamplier.
Providing a robust 28dB of gain, the DM1 is the
perfect way to boost the signal from a passive
mic, reduce the likelihood of interference, and
provide signicantly improved level to your
preamp – all without adding noise or coloration.
With a sophisticated class-A design and
specially-selected high-grade FETs, the DM1 has
the lowest self-noise in its class. Additionally, the
28dB of gain it provides is always a consistent
28dB regardless of the connected load, thanks
to its dedicated output buffer amplier. Its
output impedance is also the lowest in its class,
allowing it to drive long cable runs and reduce
the likelihood of RF interference, buzz and hum.
Reliable operation even in demanding on-
stage applications in dicult environments is
ensured by the roadworthy and slim all-metal
design, robust construction, and high-quality
manufacturing standards.
Note: the DM1 requires phantom power for
operation but with microphones does not work
than require phantom power, e.g. condenser
microphones or some active ribbon microphones.
Thank you!
This product conforms to the standards listed
in the Declaration of Conformity. Technical data
subject to change without notice.
Safety & Maintenance
To ensure proper operation, the DM1 requires
a phantom power source providing 48 Volts
according to IEC 61938.
Powering
Do not connect the DM1 to any
power supply other than a phantom
power source (input with phantom
power or external IEC standard
phantom power supply) with a
fl oating connector, using a balanced
cable with studio grade connectors
to IEC 268-12 only. This is the only
way to ensure safe and reliable
operation.
Risk of Damage
Please make sure that the pieces
of equipment to which your DM1
will be connected ful l the safety
regulations enforced in your country
and are  tted with a ground lead.
Risk of Damage


Produktspezifikationen

Marke: SE Electronics
Kategorie: Mikrofon
Modell: DM1 Dynamite

Brauchst du Hilfe?

Wenn Sie Hilfe mit SE Electronics DM1 Dynamite benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon SE Electronics

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-