Saturn ST-CC0218 Bedienungsanleitung

Saturn Eisen ST-CC0218

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Saturn ST-CC0218 (17 Seiten) in der Kategorie Eisen. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/17
1
ST-CC0218
IRON
УТЮГ
ПРАСКА
2
3
GB
IRON
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our
devices will become safe and
reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature change
(e.g. when the unit is moved from
freezing temperature to a warm
room) may cause condensation
inside the unit and a malfunction
when it is switched on. In this case
leave the unit at room temperature
for at least 1.5 hours before
switching it on.
If the unit has been in transit, leave
it indoors for at least 1.5 hours
before starting operation.
Description
1. Power cord
2. Pilot light
3. Transparent water tank
4. Housing
5. Soleplate
6. Spray nozzle
7. Water inlet cover
8. Steam dial
9. Spray button
10. Burst of steam button
11. Self clean button
12. Temperature knob
IMPORTANT SAFEGUARDS
1. Please read all instructions carefully
before using the appliance for the first
time.
2. Before connecting the appliance,
check if the voltage indicated on the
rating plate corresponds with the mains
voltage in your home.
3. Do not use appliance for other than
intended use.
4
4. The iron should always be switched
off before connecting or disconnecting
from the power supply. Do not pull on
the cord to disconnect the plug from the
wall socket.
5. Do not use the iron when it is
damaged in any way. Do not operate
the iron with a damaged cord or plug.
Do not replace the power cord or any
other parts by yourself-contact
Customer Support for Assistance.
6. The iron must not be left
unattended while it’s connected to the
supply mains.
7. The iron must be removed from the
socket outlet before the water reservoir
is filled with water (for steam irons
incorporating means for spraying
water).
8. The iron must be used and rested
on stable surface.
9. When placing the iron on it’s stand,
ensure that the surface on which the
stand is placed is stable.
10. The iron is not to be used if it has
been dropped, if there are visible signs
of damage or if it’s leaking.
11. This appliance is not intended for
use by persons (including children) with
reduces physical, sensory or mental
capabilities or lack of experience and
knowledge, unless they have been given
supervision or instruction. It is not
advised to use this appliance by children
under 14.
12. Children should be supervised to
ensure that they do not play with the
appliance.
SPRAYING
This function can be used any time and
it does not affect the ironing
temperature.
Fill water into the iron.
Aim the nozzle towards the garment.
Press the spray button.
STEAM IRONING
This function can be used only at higher
ironing temperature
• • for moderate steam
• • • or MAX for maximum steam
Fill water into the iron.
Stand the iron upright.
Connect he iron to a suitable mains
supply outlet
Turn the temperature control button
to the “• • ”, or “• • •” "MAX" setting
The pilot light turns on when the
required temperature is reached. The
iron is ready for use.
Turn the steam knob to the required
position, steam starts coming out from
the holes in the sole plate.
Notice: With conventional steam
ironing, water may leak from the sole
plate if too low temperature has been
select. If this happens turn the
temperature control to the advised
position. Steam will recommence as
soon as die appropriate temperature has
been reached.
BURST OF STEAM
This function provides an extra amount
of steam to remove stubborn wrinkles.
Fill the iron with water.
Turn the temperature control to the
position 'MAX".
The iron is ready for use.
Press the burst of steam knob once
Steam will penetrate into the
garment removing the wrinkles.
Wait a few seconds before pressing
the steam control knob wrinkles again
when there are stubborn wrinkles.
Usually all wrinkles can be removed
within three pressings.
DRY IRONING
Connect the iron to a suitable mains
supply outlet.
Ensure that the steam control knob
is in position “0”.
Select the setting on the
temperature control.
When the pilot light turns off, the
required temperature is reached. The
iron is ready to use.
TO LET THE IRON HEAT UP AGAIN
Pick up the iron or move it slightly.
The red shot-off pilot goes out. If the
temperature of the soleplate drops
below the set ironing temperature, the
temperature pilot goes on.
If the pilot light goes on after you have
move the iron, wait for it to go out
before you start ironing.
If the pilot light does not go on after
you move the iron, the soleplate still
has right temperature and iron is ready
for use.
SELF CLEAN FUNCTION
The Self Clean function can remove any
scale or impurities.
Use the self-clean function once every
two weeks. If the water in your area is
very hard, the self-clean function should
used more frequently.
Make sure the appliance is
unplugged.
Set the Variable steam control knob
to position "0" (=no steam).
Fill the water tank to the maximum
level.
Select the maximum ironing
temperature.
Put the plug in the wall socket.
5
Unplug the iron when the
temperature pilot light has gone out.
Hold the iron over the silk, press and
hold die self-clean button and gently
shake the iron. Steam and boiling water
will come out of the soleplate.
Impurities and flakes (if any) will be
flushed out.
Release the self-clean button as
soon as all water in the tank has been
used up.
Repeat the self-clean process if the iron
still contains a lot of impurities.
ANTI-CALC SYSTEM
A special resin filter inside the water
reservoir softens the water and prevents
scale build-up in the plate. The resin
filter is permanent and does not need
replacing.
Please note:
Use tap water only. Distilled and
dematerialized water makes the “Zero-
Calc” anti-calc system ineffective by
altering its physicochemical
characteristics.
ANTI-DRIP SYSTEM
With the anti-drip system, you can
perfectly iron even the most delicate
fabrics. Always iron these fabrics at low
temperatures. The plate may cool down
to the point where no more steam
comes out, but rather drops of boiling
water that can leave marks or stains. In
these cases, the Anti-drip system
automatically activates to prevent
vaporization, so that you can iron the
most delicate fabrics without risk of
spoiling or staining them.
VERTICAL STEAM
Vertical steam allows you to use the
iron like a steamer, to steam out
wrinkles on hanging garments. Hold the
iron with the tip of the iron upright in a
vertical position and about 6 inches
away from the garment. Press and
release the “burst of steam” button (10)
on the iron to release steam onto the
wrinkle. Move the iron to the next
wrinkle and press the button again. Do
not press this button more than once
every 5 seconds. Continue to steam the
garment until the wrinkles are released.
CARE AND CLEANING
1. Turn the Temperature Control Dial
to OFF, then disconnect the iron from
the wall outlet and cool it down
completely.
2. Deposits and other residues on the
sole plate can be removed with a cloth
soaked in a vinegar/water solution.
3. The casing may the wiped with a
damp cloth and then polished with a dry
one.
4.
Never use any abrasives to clean the
sole plate.
5. Keep the sole plate smooth, avoid
contact with metal objects.
6.
When you have finished ironing or
you are leaving iron unattended:
- turn the steam control knob to
position “0”.
- stand the iron upright.
-
disconnect the iron from the wall
outlet
7.
Do not allow children to touch the
iron or the power cord whom ironing.
8.
Do not immerse die iron or the cord
into water or any other liquid.
9.
Do not touch hot metal parts, hot
water or steam. These parts become hot
and may cause burns. Take care if you
turn die iron upside downs: there may
be not hot water in the tank. The plug
and cord should not be allowed to touch
the hot sole plate. Let the iron cool
down completely before taking it away.
Roll the power cord around the iron for
storage.
10. Disconnect die iron from the wall
outlet for filling in water or when you
remove the water after use.
11. The iron is for household use only.
12. Save the instruction manual for
future reference
Notes:
Some parts of the iron have been
slightly greased and as result the iron
may smoke slightly when switched on
for the first time. It will not happen
again after a few uses.
Before using for the first time,
remove any protective films or stickers
from the sole plate and the cabinet.
Then clean the sole place with a soft
cloth.
When using the iron for the first
time, test it on an old piece of fabric to
ensure that the sole plate and water
tank are completely clean.
CHOICE OF WATER
This iron can be used with normal
tap water.
If the water in your area is
particularly hard, it is advisable to use
distilled or demineralized water.
Do not use chemically descaled
water or any other liquids for refilling.
HOW TO FILL IN WATER
Set the Steam Control Knob “0” and
the temperature Control Dial to OFF.
Unplug the iron from the wall outlet.
Pour water into the water inlet.

Produktspezifikationen

Marke: Saturn
Kategorie: Eisen
Modell: ST-CC0218

Brauchst du Hilfe?

Wenn Sie Hilfe mit Saturn ST-CC0218 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Eisen Saturn

Saturn

Saturn ST-CC7109 Bedienungsanleitung

16 August 2024
Saturn

Saturn ST-CC0211 Bedienungsanleitung

8 August 2024
Saturn

Saturn ST-CC7138 Bedienungsanleitung

2 August 2024
Saturn

Saturn ST-CC0215 Bedienungsanleitung

30 Juli 2024
Saturn

Saturn ST-CC0217 Bedienungsanleitung

29 Juli 2024
Saturn

Saturn ST-CC7136 Bedienungsanleitung

29 Juli 2024
Saturn

Saturn ST-CC0213 Bedienungsanleitung

25 Juli 2024
Saturn

Saturn ST-CC7130 Bedienungsanleitung

23 Juli 2024
Saturn

Saturn ST-CC0214 Bedienungsanleitung

14 Juli 2024
Saturn

Saturn ST-CC0229 Bedienungsanleitung

12 Juli 2024

Bedienungsanleitung Eisen

Neueste Bedienungsanleitung für -Kategorien-

Jata

Jata PL1028 Bedienungsanleitung

16 Oktober 2024
Swan

Swan SI5090N Bedienungsanleitung

16 Oktober 2024
Tefal

Tefal FV9250 Program8 Bedienungsanleitung

16 Oktober 2024
Termozeta

Termozeta Lella Bedienungsanleitung

16 Oktober 2024
Imetec

Imetec E9801 Bedienungsanleitung

16 Oktober 2024
Black And Decker

Black And Decker IR1160NC Bedienungsanleitung

14 Oktober 2024
Alpina

Alpina SF-1303 Bedienungsanleitung

13 Oktober 2024
Bosch

Bosch TDI953222V Bedienungsanleitung

13 Oktober 2024
Day

Day 72443 Bedienungsanleitung

12 Oktober 2024
Clatronic

Clatronic DBS 3001 Bedienungsanleitung

12 Oktober 2024