SAB SG711 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SAB SG711 (118 Seiten) in der Kategorie Funkgesteuertes Spielzeug. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/118
SAB HELI DIVISION
G O B L I N B L A C K N I T R O
380mm
1320mm [SG651] 1385mm [SG711]
196mm
Main rotor diameter :
* 1468mm (with 650mm blades) [SG651]
* 1548mm (with 690mm blades) [SG711]
Main blade length :
* 650mm [SG651] * 690mm [SG711]
Tail rotor diameter :
* 285mm (with 105mm Tail blades) [SG651]
* 305mm (with 115mm Tail blades) [SG711]
Tail blade length :
* 105mm [SG651] * 115mm [SG711]
Weight including standard electronics:
* 4220g (Without Fuel) [SG651].
* 4300g (Without Fuel) [SG711].
Gear Ratio:
* 8.23 [SG651].
* 7.64 [SG711].
Usable Engines : YS91, YS96, YS120 - OS91, OS105.
Fuel capacity : 650cc.
SPECIFICATIONS
[ SG651 ( 650mm Size Blades ) SG711 ( 690mm Size Blades ) ]
It is extremely important that you take a moment to register your helicopter with us. This is the only way to ensure that you are
properly informed about changes to your kit, such as upgrades, retrofits and other important developments. SAB Heli Division
cannot be held responsible for issues arising with your model and will not provide support unless you register your serial number.
The Serial number is also engraved in the Aluminum Main Plate.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
VERY IMPORTANT
In the Manual bag you will find a product card your with serial number. Please take a moment to register
your kit online via our web site at:
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.goblin-helicopter.com for updates and other important information.
http:
//www.goblin-helicopter.com
13 – Belt Tension and Canopy
14 – In flight
15 – Maintenance
16 – Exploded Views
17 – Spare Parts
INDEX
1 – Serial Number
2 – Important Notes
3 – Components and Box
4 – Carbon frame Assembly
5 – Tranmission Assembly
6 – Main Rotor Assembly
7 – Assembling The Modules
8 – Engine Unit Assembly
9 – Installation of Servos
10 – Installation of FBL Unit and RX
11 – Tank System Assembly
12 – Tail and Boom Assembly
Page 0
Chapter 1, Serial Number
IMPORTANT NOTES
*This radio controlled helicopter is not a toy.
*This radio controlled helicopter can be very dangerous.
*This radio controlled helicopter is a technically complex device which has to be built and handled very carefully.
*This radio controlled helicopter must be built following these instructions. This manual provides the necessary information
to correctly assemble the model. It is necessary to carefully follow all the instructions.
*Inexperienced pilots must be monitored by expert pilots.
*All operators must wear safety glasses and take appropriate safety precautions.
*A radio controlled helicopter must only be used in open spaces without obstacles, and far enough from people to minimize
the possibility of accidents or of injury to property or persons.
*A radio controlled helicopter can behave in an unexpected manner, causing loss of control of the model, making it very
dangerous.
*Lack of care with assembly or maintenance can result in an unreliable and dangerous model.
*
Neither SAB Heli Division nor its agents have any control over the assembly, maintenance and use of this product.
Therefore, no responsibility can be traced back to the manufacturer. You hereby agree to release SAB Heli Division from
any responsibility or liability arising from the use of this product.
SAFETY GUIDELINES
*Fly only in areas dedicated to the use of model helicopters.
*Follow all control procedures for the radio frequency system.
*It is necessary that you know your radio system well. Check all functions of the transmitter before every flight.
*The blades of the model rotate at a very high speed; be aware of the danger they pose and the damage they may cause.
*Never fly in the vicinity of other people.
*Follow all of the safety regulations relating to fuel management.
*Pay attention to the danger surrounding the cooling fan with running engine.
*Use caution when handling the muffler after a flight as they get very hot after a flight.
NOTES FOR ASSEMBLY
Please refer to this manual for assembly instructions for this model.
Follow the order of assembly indicated. The instructions are divided into chapters, which are structured in a way that
each step is based on the work done in the previous step. Changing the order of assembly may result in additional or
unnecessary steps.
Use thread lockers and retaining compounds as indicated. In general, each bolt or screw that engages with a metal part
requires thread lock.
It is necessary to pay attention to the symbols listed below:
Important
Use retaining
compound
(eg Loctite 648)
Use retaining
compound
(eg Loctite 243)
Use CA Glue
Use Proper
Lubricant
Indicates that for this
assembly phase you need
materials that are in bag xx.
Bag xx
Page 1
Chapter 2, Important Notes


Produktspezifikationen

Marke: SAB
Kategorie: Funkgesteuertes Spielzeug
Modell: SG711

Brauchst du Hilfe?

Wenn Sie Hilfe mit SAB SG711 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Funkgesteuertes Spielzeug SAB

Bedienungsanleitung Funkgesteuertes Spielzeug

Neueste Bedienungsanleitung für -Kategorien-