SAB Goblin Kraken Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SAB Goblin Kraken (48 Seiten) in der Kategorie Funkgesteuertes Spielzeug. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/48
8 – Head Assembly
9 – Assembling of the modules
10 – Tail Group Assembly
11 – Tail Boom Assembly
12 – Low Side Frame Installation
13 – Landing Gear Installation
14 – Installation of The Motor
1 – Introduction
2 – Important Notes
3 – Note for Assembly
4 – Carbon Rod Assembly
5 – Transmission Group Assembly
6 – Swashplate Servos Assembly
7 – Frame Group Assembly
INDEX
15 – Installation ESC/FBL/RX
16 – Installation Batteries
17 – Installation Canopy
18 – In flight
19 – Maintenance
20 – Transmission Module
21 – Check list
22 – Spare Parts
http://www.goblin-helicopter.com
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site
www.goblin-helicopter.com
for updates and other important information.
VERY IMPORTANT
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for any issues with your model
and will not provide support unless you register your model.
The Serial number is also engraved in the Aluminum part.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
You will find your serial number on the RED plate of the transmission module and on the product card
included with your kit.
Please take a moment to register your kit online via our web site at:
Page 1
1558mm
345mm
Typical Speed Controller: 12S, 160/200 A
Typical Motor : 12S, 500-560 Kv, 4525 - 4530 series,
(max 62 mm diameter, max 70 mm height).
Battery compartment: 12S, 4200/5500 mAh.
(max 56mmx70mmx320mm).
Suggested weight from 1400gr to 1700gr.
Minimum tail blades size: 105mm
Maximum tail blades size: 115mm
KIT Includes:
• 21T motor pulley (other pulley sizes available).
• 2 battery trays with straps.
190mm
• AIRFRAME weight:
2680 ( with blades, no battery, no electronics ).
• Main rotor diameter:
1558 mm (with 690 mm blades).
• Main blade length:
650 to 730mm.
• Tail rotor diameter:
284 mm (with 105 mm tail blades).
• Tail blade length:
105 to 115 mm.
GOBLIN KRAKEN TECHNICAL SPECIFICATIONS
• Cyclic Servos:
Standard size 40mm.
• Tail Servo:
Standard size 40mm.
• Main Rotor Ratio :
12.1 to 8.8 :1 ( 21T included: 10.4:1).
• Tail Rotor Ratio :
5.0-4.8:1 ( 27T included: 4.8:1 ).
• 690 mm main blades.
• 105 mm tail blades.
Page 2


Produktspezifikationen

Marke: SAB
Kategorie: Funkgesteuertes Spielzeug
Modell: Goblin Kraken

Brauchst du Hilfe?

Wenn Sie Hilfe mit SAB Goblin Kraken benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Funkgesteuertes Spielzeug SAB

Bedienungsanleitung Funkgesteuertes Spielzeug

Neueste Bedienungsanleitung für -Kategorien-