Ryobi One+ PSBDD02 Bedienungsanleitung
Ryobi
boormachine
One+ PSBDD02
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ryobi One+ PSBDD02 (28 Seiten) in der Kategorie boormachine. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ONE+ HP COMPACT 1/2 in.
DRILL/DRIVER
PERCEUSE-VISSEUSE DE 13 mm
COMPACTE HP ONE+
TALADRO/ATORNILLADOR ONE+ HP
COMPACT 13 mm
PSBDD02
General Power Tool
Safety Warnings 2-3 ..............................
Drill-Driver Safety Warnings 4 ................
Symbols 5 ...............................................
Assembly .............................................6
Operation ......................................... 6-8
Maintenance ........................................9
Troubleshooting ...................................9
Illustrations .................................. 10-11
Parts Ordering
and Service Back page ..........................
Règles de sécurité générales
relatives aux outils électriques 2-3 ........
Avertissements de sécurité relatifs
perceuse-tournevis 4 ..............................
Symboles 5 .............................................
Assemblage .........................................6
Utilisation ........................................ 6-9
Entretien ..............................................9
Dépannage 9 ..........................................
Illustrations .................................. 10-11
Commande de pièces
et dépannage Page arrière ....................
Advertencias de seguridad
para herramientas eléctrica 2-3 .............
Advertencias de seguridad taladro-
destornillador 4 ......................................
Símbolos 5 .............................................
Armado ................................................6
Funcionamiento ............................... 6-9
Mantenimiento .....................................9
Corrección de problemas 9 ....................
Illustraciones ............................... 10-11
Pedidos de piezas
y servicio.........................Pág. posterior
WARNING:
To reduce the risk of injury, the user
must read and understand the opera-
tor’s manual before using this product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien com-
prendre le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar este
producto.
TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE DE CONTENIDO
SAVE THIS MANUAL
FORFUTUREREFERENCE
GUARDE ESTE MANUAL
PARAFUTURASCONSULTAS
CONSERVER CE MANUEL
POURFUTURERÉFÉRENCE
2 - English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations,
and specifications provided with this power tool.
Failure to follow all instructions listed below may resultl
in electric shock, re, and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carry-
ing, pulling, or unplugging the power tool. Keep cord
away from heat, oil, sharp edges, or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use this product only with batteries and chargers
listed in tool/appliance/battery pack/charger correla-
tion supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source,
and/or battery pack, picking up. or carrying the tool.
Carrying power tools with your nger on the switch or
energizing power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair and clothing away from moving parts.
Loose clothes, jewelry, or long hair can be caught in
moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
3 - English
GENERAL POWER TOOL SAFETY WARNINGS
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories, and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean, and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and re.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws, or other small metal objects, that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a re.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modied batteries may exhibit
unpredictable behaviour resulting in re, EXPLOSION,
or risk of injury.
Do not expose a battery pack or tool to fire or exces-
sive temperature. Exposure to re or temperature above
265° F may cause explosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specied range may damage
the BATTERY and increase the risk of re.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
When servicing a power tool, use only identical
replacement parts. Follow instructions in the Main-
tenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
Produktspezifikationen
| Marke: | Ryobi |
| Kategorie: | boormachine |
| Modell: | One+ PSBDD02 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ryobi One+ PSBDD02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung boormachine Ryobi
6 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
22 August 2024
4 August 2024
Bedienungsanleitung boormachine
- boormachine Panasonic
- boormachine Clas Ohlson
- boormachine Cotech
- boormachine Makita
- boormachine Bosch
- boormachine Flex
- boormachine Parkside
- boormachine Vonroc
- boormachine AEG
- boormachine Velleman
- boormachine Powerfix
- boormachine Black And Decker
- boormachine Cocraft
- boormachine FERM
- boormachine Skil
- boormachine Topcraft
- boormachine Trotec
- boormachine Maestro
- boormachine Carat
- boormachine Eibenstock
- boormachine Hilti
- boormachine Bort
- boormachine DeWalt
- boormachine Einhell
- boormachine Elu
- boormachine Festool
- boormachine Mafell
- boormachine Maktec
- boormachine Worx
- boormachine Hikoki
- boormachine Hitachi
- boormachine Hazet
- boormachine Kress
- boormachine Max
- boormachine Metabo
- boormachine Stanley
- boormachine Würth
- boormachine Güde
- boormachine Power Craft
- boormachine Scheppach
- boormachine Workzone
- boormachine Meec Tools
- boormachine Dremel
- boormachine Fieldmann
- boormachine EcoMAC
- boormachine Proxxon
- boormachine Westfalia
- boormachine Dedra
- boormachine DURO
- boormachine Graphite
- boormachine Silverline
- boormachine Holzmann
- boormachine Huvema
- boormachine Robust
- boormachine Stomer
- boormachine Yato
- boormachine Baumr-AG
- boormachine Genesis
- boormachine Toolland
- boormachine Batavia
- boormachine Bavaria
- boormachine Brüder Mannesmann
- boormachine Milwaukee
- boormachine Fein
- boormachine Craftsman
- boormachine Powerplus
- boormachine Rupes
- boormachine ProfiTech
- boormachine Alpha Tools
- boormachine Ozito
- boormachine Kawasaki
- boormachine Sun Joe
- boormachine Ridgid
- boormachine Porter-Cable
- boormachine Duro Pro
- boormachine Economy
- boormachine Fe Powertools
- boormachine Gamma
- boormachine Global
- boormachine Goon
- boormachine Lux Tools
- boormachine Max Bahr
- boormachine Protool
- boormachine Spit
- boormachine Steren
- boormachine Tanaka
- boormachine Meister Craft
- boormachine Malmbergs
- boormachine RIKON
- boormachine Kreg
- boormachine Einhell Bavaria
- boormachine Powerblade
- boormachine Rok
- boormachine Tryton
- boormachine MyTool
- boormachine McKenzie
- boormachine Rodcraft
- boormachine Black Decker
- boormachine Handwerk
- boormachine Stalco
Neueste Bedienungsanleitung für -Kategorien-
16 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
14 September 2024
14 September 2024