RGBlink MSP 217 Bedienungsanleitung
RGBlink
Audio/video-converter
MSP 217
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für RGBlink MSP 217 (2 Seiten) in der Kategorie Audio/video-converter. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
MSP 217 –Quick Start
MSP 217-TX SDI to Fiber Right Panel
Signal Indicator
Power Interface
Connection
MSP 217-RX Fiber to SDI Left Panel
1 4
Remote communication device control interface, used
to connect to the computer or console.
Power Interface
USB Interface
Interface
The device uses the standard 12V/1.5A power supply.
Signal Indicator
SDI Input Interface
SDI input interface Can receive video signal from ,
HD player, and HD camera, connect interface 16 via
75 ohms impedance BNC port. Connect LED screens
via network cable.
Fiber Output Interface
1
1
VIEW SIZE THE WORLD
NOTE For full installation, configuration, and operation details, please refer to
the MSP 217 user manual, which is available at www.rgblink.com.
This guide provides quick start instructions for an experienced installer
to set up and operate the MSP 217.
Address: S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: sales@rgblink.com http://www.rgblink.cn
MSP 217 Quick Start
Rev 1.0
Page 1 of 2
53
62
SDI Input Interface USB Interface
Power indicator 2 lights when device has power
supply.
LED indicator 4 is on when connect SDI cable and
the device is in normal Operation.
LED indicator 6 is on when connect USB cable and
the device is in normal Operation.
MSP 217-TX SDI to Fiber Left Panel
Connection
1 2Signal Indicator Fiber Output Interface
Signal Indicator
LED indicator 1 is on when connect fiber cable and
the device is in normal operation.
Used to connect fiber cable, the device uses single
mode one-core, LC interface.
Connection
2Signal Indicator Fiber Input Interface
Signal Indicator
LED indicator 1 is on when connect fiber cable and
the device is in normal operation.
Fiber Input Interface
Used to connect fiber cable, the device uses single
mode one-core, LC interface.
MSP 217-RX Fiber to SDI Right Panel
Connection
53
642Power Interface Signal Indicator
SDI Output Interface USB Interface
Power Interface
The device uses the standard 12V/1.5A power supply.
SDI Output Interface
USB Interface
Function Block Diagram
Operating Principle
MSP 217 SDI to Fiber
Address: S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: sales@rgblink.com http://www.rgblink.cn
MSP 217 Quick Start
Rev 1.0
Page 2 of 2
Common Questions and Solution
Signal Indicator
Power indicator 2 lights when device has power supply.
LED indicator 4 is on when connect SDI cable and the
device is in normal Operation.
LED indicator 6 is on when connect USB cable and
the device is in normal Operation.
SDI output interface Can receive video signal from ,
HD player, and HD camera, connect interface 16 via
75 ohms impedance BNC port. Connect LED
screens via network cable.
Remote communication device control interface,
used to connect to the computer or console.
Operation Manual
MSP 217 SDI to Fiber transmitter is connected to
media player or HD/SD SDI camera, etc. MSP 217
SDI to Fiber transmitter to power supply. In order to
avoid the damage of device, please use the standard
power adapter. Fiber interface is used to connect to
MSP 217 Fiber to SDI receiver.
MSP 217 Fiber to SDI
Function Block Diagram
Operating Principle
on MSP 217 SDI to Fiber transmitter with fiber cable,
and then connect the SDI interface on MSP 217 Fiber
to SDI panel to display device.In order to avoid
damaging the device, please use the standard power
adapter.
MSP 217 Fiber to SDI receiver is connected to
television (monitor) or other device which has SDI
interface
Connect the fiber interface to the other interface
Power indicator light is off or blinks
1. Check whether plug in the power cord, and has
power supply;
2. Check whether the power cable is connected, and
in good connection;
3. If above without problem, then the power indicator
is damaged.
Signal indicator light is off or blinks
1. Check whether connect the signal;
2. Check whether the input signal, input wire and output
wire are normal, the interfaces are in good connection;
3. If above without problem, then the signal indicator is
damaged.
Note: The indicator beside fiber interface is on when the
device is in normal operation. It will off or blink if the
fiber cable is in poor connection.
12V power interface poor contact
1. Check whether the power interface is in good
connection, if the interface is not tighten, screw it again.
2. Check whether any problem with adapter head,
replace it if there is any problem.
3. Check the power connector is loose, if so, please send
to processional personnel for repair.
Produktspezifikationen
Marke: | RGBlink |
Kategorie: | Audio/video-converter |
Modell: | MSP 217 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit RGBlink MSP 217 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Audio/video-converter RGBlink
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
Bedienungsanleitung Audio/video-converter
- Audio/video-converter Manhattan
- Audio/video-converter Nedis
- Audio/video-converter Roland
- Audio/video-converter König
- Audio/video-converter Shure
- Audio/video-converter Abus
- Audio/video-converter Tascam
- Audio/video-converter Zoom
- Audio/video-converter Lindy
- Audio/video-converter ViewSonic
- Audio/video-converter Tripp Lite
- Audio/video-converter Marmitek
- Audio/video-converter TRENDnet
- Audio/video-converter AVerMedia
- Audio/video-converter TP-Link
- Audio/video-converter Kathrein
- Audio/video-converter Black Box
- Audio/video-converter Techly
- Audio/video-converter SilverStone
- Audio/video-converter Evolution
- Audio/video-converter Monoprice
- Audio/video-converter Monacor
- Audio/video-converter TEAC
- Audio/video-converter Genie
- Audio/video-converter D-Link
- Audio/video-converter Digitus
- Audio/video-converter DataVideo
- Audio/video-converter LevelOne
- Audio/video-converter Tenda
- Audio/video-converter Kramer
- Audio/video-converter Pro-Ject
- Audio/video-converter Intellinet
- Audio/video-converter Kicker
- Audio/video-converter AJA
- Audio/video-converter JL Audio
- Audio/video-converter Planet
- Audio/video-converter Blackmagic Design
- Audio/video-converter RME
- Audio/video-converter Sitecom
- Audio/video-converter AMX
- Audio/video-converter Vizio
- Audio/video-converter Siig
- Audio/video-converter AudioControl
- Audio/video-converter TV One
- Audio/video-converter StarTech.com
- Audio/video-converter Smart-AVI
- Audio/video-converter Metra
- Audio/video-converter PAC
- Audio/video-converter Gefen
- Audio/video-converter Aluratek
- Audio/video-converter Atlantis Land
- Audio/video-converter CYP
- Audio/video-converter ATen
- Audio/video-converter Wentronic
- Audio/video-converter Antelope Audio
- Audio/video-converter Extron
- Audio/video-converter Atlona
- Audio/video-converter Rocstor
- Audio/video-converter WyreStorm
- Audio/video-converter Key Digital
- Audio/video-converter Ocean Matrix
- Audio/video-converter AVPro Edge
- Audio/video-converter Blustream
- Audio/video-converter MuxLab
- Audio/video-converter A-NeuVideo
- Audio/video-converter Kanex
- Audio/video-converter C2G
- Audio/video-converter TechLogix Networx
- Audio/video-converter Sabrent
- Audio/video-converter ShieldRock
- Audio/video-converter Intelix
- Audio/video-converter HELGI
- Audio/video-converter FSR
- Audio/video-converter Newell
- Audio/video-converter Spatz
- Audio/video-converter PulseAudio
- Audio/video-converter Comprehensive
- Audio/video-converter Digitalinx
- Audio/video-converter Data-Tronix
- Audio/video-converter Sescom
- Audio/video-converter PureLink
- Audio/video-converter INOGENI
- Audio/video-converter FoneStar
Neueste Bedienungsanleitung für -Kategorien-
13 September 2024
13 September 2024
11 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024