Pyle Health PHPHA78 Bedienungsanleitung

Pyle Kopfhörer Health PHPHA78

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle Health PHPHA78 (10 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

TV HEARING AID

USER MANUAL

H. Safety instructions

1. Please read this instruction manual carefully and completely before using the

products. Make this manul easily accessible at all times.

2. Always keep the product dry, and do not expose them to extreme temperatures.

3. The volume of the receiver must always be turned to the lowest before

switching the unit on. High volume may cause hearing damage in persons

with healthy hearing, especially in children.

4. Keep all liquids far away from the devices. Before cleaning the product and

its accessories, disconnect the transmitter from the mains adapter, and use

only a slightly damp cloth to clean the devices.

5. Use only the supplied mains adapter.

6. Use the products with care and set them up on a stable surface of a clean,

dust-free environment.

7. The unit may get warm when being used. Ensure the unit has adequate

ventilation.

8. Please put the product far away from microwave oven, mobile phones, etc.

to avoid unnecessary electronic wave interference.

9. Please switch off the transmitter and receiver after use, and pull out the mains

adapter from the wall socket when not using for a long time.

10. Please refer all servicing to qualified personal only! Do not attempt to open

the unit!

Model: PHPHA78

Contents

B. Product parts

C. Part function

D. Bluetooth Pairing

E. Set up and user instructions

F. Technology parameters

G. Problems and solutions

. Product instruction

1. What is a TV hearing aid

. Brief introductions

3. Main functions

4. Main technologies

5. Features

1. Wireless TV hearing aid function

2. Regular hearing aid function

3. Wired headphone with hearing aid function

4. Use the regular hearing aid function

to listen to telephone

5. Use the regular hearing aid function

to listen to mobile phone

6. Computer chatting instruction

7. Charging instruction

H. Safety instructions

G. Problems and solutions

Phenomena Causes Solutions

Receiver

doesn t’

work, no

sound

received

The transmitter is not

connected well.

Make sure the mains adapter and

the audio cable of the transmitter

be plugged well. Or pair again.

The connection between the

transmitter and the sound

source is wrong.

Make sure the connection correct

between the transmitter and the

sound source.

The sound source isn t turned’

on or its volume is too low.

Turn on the sound source, and adjust

its volume to a sufficient level.

The battery is not inserted

properly in the receiver or

the battery is run out.

Insert the battery properly, or

charge the battery fully.

Sound is

poor or

some noise

is occurred

The receiver is out of the

transmitting range.

Move the receiver closer to the

transmitter.

The battery s power is too low. Charge the battery fully.’

Receiver

or battery

not being

charged

The receiver or the battery is

not inserted correctly.

Make sure the receiver inserted to

the charging bay correctly or the

battery inserted to the charging

compartment at the side of the

transmitter correctly.

The transmitter is placed too

close to metalworks or other

electromagnetic wave objects.

Put the transmitter in a different place

or move away the objects aect the

signal.

Adjust the balance control by the

screwdriver properly.

Switch the transmitter to MONO

status.

The balance is not adjusted

properly.

The audio out signal of the

audio source is mono, but the

transmitter is switched in

STEREO status.

The sound

is heard

only with

one ear

The audio source s volume is’

set too low. Adjust its volume properly.

4. Storage condition

Temperature: -30 90～ ℃ (Don't let it be shocked, pressed, and wetted.)

3. Working environment

Working temperature: -10 60 Working humidity: 10% 90%～ ℃ ～

2 Receiver、

Working voltage ~3.7V (3.3 4.2V)

Dynamic 14~27mAworking current

Wired earphone input working current 5~12mA

Wired earphone signal input 0.1 1.0V~

Working current of MIC input 4~8mA

Max. Gain of MIC signal input 50 2dB (at 1KHz)±

Receiv frequency 2.4GHz ISM

ing

Distortion 1%≤

S/N ratio 75dB≥

Maximum output power 30~35mW

Li-ion battery charging time 3.5~4 hours

Modulation method GFSK

Bluetooth V4.0 Class II

Auto power-off current 20 Aµ≤

Auto power-off time

Sensitivity of built-in MIC 34.5 1.5dB-±

Sensitivity of external MIC 50 2dB-±

Frequency response 20Hz~20KHz

Max. output sound pressure level 123 3dB SPL±

Receiving range m (without obstacles)15

15 hours for TV hearing aid

function, 36 hours for regular

hearing aid function.

5mins (after the receiver is in the

standby status.)

Working time when Li-ion battery

is full

2. Brief introduction

3. Main functions

1. What is a TV hearing aid

The TV hearing aid is specially designed for hearing disable people to listen to

TV, mobile phone (or other audio devices).

It can help to listen to TV, sound clearly

while other hearing aids can't do it. In the market, hearing disable people can

only find some normal wireless headphones for watching TV or listening to

, the worst thing is that it will make the hearing ability worse and

worse by only adjust the volume louder for a long time. Our TV hearing aid can

solve above problems.

Besides the strong wireless TV listening function, it is a perfect hearing aid and

a wired hearing improving headphone. You can use it with a normal telephone,

a mobile phone, and even listen to music, listen to radio, etc.

Not only TV hearing aid, but also

mobile phone call aid. mobile phone

mobile phone

A. Product instruction

(1) Wireless TV hearing aid: (refer to article 1 of P9 )

With the product, the hearing impaired person can enjoy TV programs

comfortably and clearly, by his/her special tone, right & left volume.

(2). One button switching between TV hearing aid and call hearing aid:

(please refer to Article 1(4) of P10 )

Press the CH/MIC button on the receiver, the TV signal received wirelessly will

be cut off. The user will answer the phone by bluetooth. When the talk is over,

JH-8013A/B & apply bluetooth technology. Ensure the high

quality stereo signal being transmitted and received. Bluetooth CSR V2.1+EDR

A2DP for the transmitter, CSR V4.0 for the receiver.

It's convenient for the

user watching TV while don t worry missing phone call. Stereo/mono switch’

function brings people with different hearing satisfaction.

One transmitter can work

with two receivers, one receiver can work with the transmitter and a mobile

phone with the bluetooth function at the same time.

JH-8014A/B

Produktspezifikationen

Marke:	Pyle
Kategorie:	Kopfhörer
Modell:	Health PHPHA78
USB Anschluss:	Nein
Bluetooth:	Ja
Breite:	132 mm
Tiefe:	200 mm
Gewicht:	500 g
Produkttyp:	Kopfhörer
Empfohlene Nutzung:	Musik
Headset-Typ:	Binaural
Tragestil:	In-ear, Stethoset
Produktfarbe:	Black, White
3,5-mm-Anschluss:	Ja
Übertragungstechnik:	Verkabelt & Kabellos
Position Kopfhörerlautsprecher:	Im Ohr
Kopfhörerfrequenz:	20 - 20000 Hz
Impedanz:	- Ohm
Akkuladezeit:	3.5 h
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	20 mm
2,5-mm-Anschluss:	Nein
Kabellose Reichweite:	15 m
2 x 3,5 mm Stecker:	Nein
Anzahl:	1
Kopfhörer-Empfindlichkeit:	75 dB
THD, totalklirren:	1 %
Akku-/Batteriespannung:	3.7 V
Frequenzband:	2.4 GHz
Receiver enthalten:	Ja
Kontinuierliche Audiowiedergabezeit:	18 h
Empfängerdimensionen (B x T x H):	96.5 x 116.8 x 22.8 mm