Projecta SPP135-MC4 Bedienungsanleitung

Projecta Solarpanel SPP135-MC4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta SPP135-MC4 (20 Seiten) in der Kategorie Solarpanel. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
POLYCRYSTALLINE
SOLAR PANELS
(MC4 Series)
P/No SPP80-MC4, SPP120-MC4, SPP135-MC4, SPP150-MC4
WARNING
• For installations with lead acid batteries, avoid sparks or flames near the batteries and always use proper
eye protection.
• Given sufficient light, solar panels always generate energy even when they are disconnected. Accidental
‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a fire hazard. It is
recommended that the front face of the panel(s) are covered with a soft cloth to block incoming light
during installation and wiring.
• When connecting panels in series do not exceed 24VDC (Max. 2 panels).
• Do not scratch or bend solar panels.
• Do not disassemble the solar panel frame.
• When mounting solar panels at a height adhere to all relevant safety regulations.
• For fixed installations ground the frame of the solar panel(s) to reduce lightning hazard.
• Do not walk on modules.
• Do not attempt to increase module output by concentrating light on its surface with mirrors.
• Be sure to use components (cables, fuses, etc) with ratings greater than 25% of solar panel/s maximum
current ratings.
FEATURES
COMPACT AND POWERFUL
Polycrystalline solar panels are manufactured from a solar cell that is cast from silicon. These cells are more
efficient at producing power than an amorphous panel, so the size of the panel is smaller yet produces greater
output power.
HEAVY DUTY FRAME
Corrosion resistant frames are constructed to withstand wind speeds in excess of 130 km/h in typical ground
mounted applications. The frames are clear anodized and the inner corner connection has a strong mechanical
resistance to weather.
TEMPERED LOW IRON GLASS
Clear encapsulated insulation enhances solar cell performance and provides proven weather protection,
Tempered low iron glass provides both better impact resistance and better light transmission, allowing the
generation of more electricity by reducing the quantity of light that is reflected away from the module.
2
SPECIFICATIONS
Table 1
SPP80-MC4 SPP120-MC4 SPP135-MC4 SPP150-MC4
TYPE Polycrystalline Polycrystalline Polycrystalline Polycrystalline
RATED POWER 80W 120W 135W 150W
OPEN CIRCUIT 21.5V 21.5V 21.5V 21.5V
VOLTAGES
SHORT CIRCUIT 5.04A 7.55A 8.5A 9.44A
CURRENT
PEAK POWER 17.5V 17.5V 17.5V 17.5V
VOLTAGE
PEAK POWER 4.58A 6.86A 7.72A 8.58A
CURRENT
TEST 1000W/m21000W/m21000W/m21000W/m2
CONDITIONS 25ËšC 25ËšC 25ËšC 25ËšC
SPP80-MC4 SPP120-MC4 SPP135-MC4 SPP150-MC4
BATTERY SIZES 250–900CCA 250–1200CCA 300–1300CCA 350–1400CCA
(1 Panel) (automotive) (automotive) (automotive) (automotive)
300–1000MCA 350–1500MCA 400–2000MCA 500–2200MCA
(marine) (marine) (marine) (marine)
30–140Ah 40–200Ah 50–240Ah 60–260Ah
(deep cycle) (deep cycle) (deep cycle) (deep cycle)
3


Produktspezifikationen

Marke: Projecta
Kategorie: Solarpanel
Modell: SPP135-MC4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta SPP135-MC4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Solarpanel Projecta

Bedienungsanleitung Solarpanel

Neueste Bedienungsanleitung für -Kategorien-