Projecta SPM180K Bedienungsanleitung
Projecta
Solarpanel
SPM180K
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta SPM180K (8 Seiten) in der Kategorie Solarpanel. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
1
SOLAR PANEL KIT
MONOCRYSTALLINE
P/No. SPM180K
WARNING
SOLAR PANEL
• For installations with lead acid batteries, avoid sparks or flames near the batteries and
always use proper eye protection
• Given sufficient light, solar panels always generate energy even when they are disconnected
• Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a
fire hazard
• Do not scratch or bend solar panels
• Do not disassemble the solar panel
• When mounting solar panels at a height adhere to all relevant safety regulations
• Do not walk on modules
• Do not attempt to increase module output by concentrating light on its surface with mirrors
• Be sure to use components (cables, fuses, etc) greater than 25% of solar panel’s maximum
current ratings
• When storing the Solar panel kit do not pack heavy items on top the Solar panel and bag
• Do not disassemble the controller. Take to a qualified person if the unit requires repairing
FEATURE OVERVIEW
SOLAR PANEL
Compact and Powerful – Monocrystalline solar panels are manufactured from a solar cell that
is cast from silicon. These cells are more efficient at producing power than amorphous panels,
so the size of the panel is smaller yet produces greater output power
Lightweight, Foldable Design – Folds up into a self contained 38cm x 56cm bag for easy
storage
Scratch Resistant – Panels feature a scratch resistant mat coating for durability
5m Lead & Battery Clips – Fused battery lead makes for trouble free battery connection.
Front pocket for easy storage
Heavy Duty Canvas – Tough canvas material suitable for camping and off-road environments
Metal Support Legs – Legs keep the panels at the optimum angle for maximum performance
Collapsible Tent Pole – The pole feeds through the sewn in loops to keep the panel rigid
when set-up
Reinforced Eyelets – Reinforced eyelets allow you to secure the panels using tent pegs, or hang
the panels vertically
2
SPECIFICATIONS
SOLAR CONTROLLER
Advanced MCU – Features control pulse width modulated (PWM) technology, high
efficiency operation.
Multi-Chemistry – Target for Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.
4 Stage Charging – Built in regulator to prevent your battery from being overcharged.
Overcharging occurs when the charge voltage is unregulated. This can result in premature
battery failure.
The regulator also prevents your battery from being under charged, in the solar energy field,
battery undercharge always occurs, especially on some Conventional lead – acid or Calcium
batteries; The unit provides an automatic Equalization feature for deeply drained Conventional
lead acid batteries or Calcium batteries, as well as provides a cycling automatic Equalizing
feature every 28 days.
It keeps the battery fully charged by using a process called “floating”. This means the controller
will stop charging when the battery is full and will automatically start charging the battery as
required. This process will also reduce water loss and help prevent the battery from ‘drying out’.
Discharge Protection – Protects your battery from discharge at night. Under low light or no
light conditions the solar panel voltage could be less than the battery voltage. The unit contains
a special circuit which prevents current flowing back from the battery and into the solar panel.
LED Indicators – Coloured LED’s to easily indicate the operational status and battery conditions.
Digital LCD – Directly display battery voltage, charging current, charging capacity (Amp hour),
battery types, full charge and faulty codes.
Daily Amp hour (Ah) Meter – Takes a reading of the accumulated energy (Ah) and can be
displayed at the push of a button (Volt/Amp). The meter resets when the solar panels are inactive
or disconnected/reconnected to the battery.
Unit Protection – Multi charging protects against reverse polarity, short circuit, over temperature,
over voltage, etc.
Voltage Compensation – Automatically measures the voltage drop from the output lead and
self adjusts to maximise the charge for the 5m supplied cable.
P/No. SPM180K
TYPE MONOCRYSTALLINE
RATED POWER 180W
OPEN CIRCUIT VOLTAGE 21V
SHORT CIRCUIT CURRENT 11.0A
PEAK POWER VOLTAGE 18.0V
PEAK POWER CURRENT 10.3A
TEST CONDITIONS 1000W/m2, 25°C
FUSE 15.0A
BATTERY CONNECTIONS Battery Clamps
WEIGHT 8.3kg
3
OPERATION – LCD DISPLAY
Please check your battery manufacturer’s specifications to select correct battery type. The unit
provides 4 battery types for selections: Gel, AGM, WET (conventional lead acid), and Calcium.
Press BATTERY TYPE button and hold for 3 seconds to go into your battery type selection mode,
the battery type you select will be shown on the LCD meter, the default setting is AGM Battery;
the controller will automatically memorize your battery type setting.
Caution: Incorrect battery type setting may damage your battery.
When the controller powers on, the unit will run ‘self-qualify’ mode and automatically show
below items on LCD before going into charging process
Self-test starts, digital meter segments test
Software version test
Rated voltage and current test
After going into charging process, the LCD displays the charging statues as below:
Press VOLT / AMP button in sequence, the LCD will display in turn with Battery Voltage,
Charging Current and Charged capacity (Amp-hour)
Display in the day time:
Display during the night:
Ah
Produktspezifikationen
| Marke: | Projecta |
| Kategorie: | Solarpanel |
| Modell: | SPM180K |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Projecta SPM180K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Solarpanel Projecta
19 September 2024
30 August 2024
1 August 2024
28 Juli 2024
12 Juli 2024
10 Juli 2024
Bedienungsanleitung Solarpanel
- Solarpanel Anker
- Solarpanel BenQ
- Solarpanel LG
- Solarpanel Velleman
- Solarpanel Technaxx
- Solarpanel Sharp
- Solarpanel Dometic
- Solarpanel Aukey
- Solarpanel KKT Kolbe
- Solarpanel Vivanco
- Solarpanel Imou
- Solarpanel Perel
- Solarpanel Xtorm
- Solarpanel Viessmann
- Solarpanel Gre
- Solarpanel Victron Energy
- Solarpanel V-TAC
- Solarpanel SereneLife
- Solarpanel Fantini Cosmi
- Solarpanel EasyMaxx
- Solarpanel CyberPower
- Solarpanel Reolink
- Solarpanel Arlo
- Solarpanel ECTIVE
- Solarpanel Fimer
- Solarpanel Growatt
- Solarpanel SolarEdge
- Solarpanel EcoFlow
- Solarpanel Goal Zero
- Solarpanel Tycon Systems
- Solarpanel FOX ESS
- Solarpanel Tru Components
- Solarpanel Sunware
- Solarpanel APSystems
- Solarpanel Longi
- Solarpanel Sunrise
- Solarpanel Renogy
- Solarpanel SunPower
- Solarpanel Trina Solar
Neueste Bedienungsanleitung für -Kategorien-
Victron Energy BlueSolar PWM-Light 48-30 Bedienungsanleitung
15 Oktober 2024
24 September 2024
24 September 2024
24 September 2024
21 September 2024
7 September 2024
7 September 2024
6 September 2024
6 September 2024
5 September 2024