Powerplus POWXG9576 Bedienungsanleitung

Powerplus Pumpe POWXG9576

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Powerplus POWXG9576 (5 Seiten) in der Kategorie Pumpe. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
POWXG9576 EN
Copyright © VARO NV 2020 P a g e | 1www.varo.com
1 APPLICATION .................................................................................. 2
2 DESCRIPTION (FIG A) .................................................................... 2
3 PACKAGE CONTENT LIST ............................................................. 2
4 SYMBOLS ........................................................................................ 2
5 SPECIFIC SAFETY WARNINGS ..................................................... 3
6 ASSEMBLY ...................................................................................... 3
6.1 Electrical connection .............................................................................................. 3
6.2 Earth ........................................................................................................................ 3
7 OPERATION ..................................................................................... 3
7.1 Pressure hose ......................................................................................................... 4
7.2 Safety requirements ................................................................................................ 4
8 CLEANING AND MAINTENANCE ................................................... 5
8.1 Cleaning 5 ...................................................................................................................
9 TECHNICAL DATA .......................................................................... 5
10 TROUBLE SHOOTING .................................................................... 5
11 WARRANTY ..................................................................................... 7
12 ENVIRONMENT ............................................................................... 8
13 DECLARATION OF CONFORMITY ................................................ 8
POWXG9576 EN
Copyright © VARO NV 2020 P a g e | 3www.varo.com
5 SPECIFIC SAFETY WARNINGS
â–ª This water pump has no water-sprinkling protection feature and should be placed only in a
dry environment. Never place the water pump or operate it in the rain or in a humid space.
â–ª This water pump should not be used with flammable or harmful liquids.
â–ª Idle operation of the water pump must be avoided.
â–ª This water pump is for work in clean water. The scope its application includes irrigation of
in the garden, water supply to a household, sprinkling in a garden or on farmland.
â–ª This water pump may not be exposed for long periods to impurities, sand, stone, sticky
substances, etc., mixed in with the conveyed media. Because the conveyed media may
contain chemical corrosive substances, it is necessary to pay special attention to
preventing influence by these on the material of the pump body. It is not permitted to use
this water pump to convey drinking water.
This appliance cannot be used by children or people who are physically,
mentally or developmentally impaired, or people who lack experience or
knowledge, except in case these people receive instruction from a person
responsible for their safety, a supervisor, or by studying the preceding
instructions concerning use of this appliance.
6 ASSEMBLY
â–ª During the installation of the water pump, the power supply to the water pump must be
switched off.
â–ª During installation of the equipment, it is necessary to keep it under dry and well-ventilated
conditions, at an ambient temperature below 40°C.
â–ª If the required pumping water is excessive due to your own action, resulting in flooding of
the irrigation site, a number of protective measures may be taken (e.g. installation of a
device for discharging the excess water, an alarm, standby pump, water container, etc.).
However, our company is not responsible for any losses thus caused.
â–ª Before use, the water pump should be inspected for safety to ensure that there is no
damage to the power cable or the plug.
6.1 Electrical connection
â–ª The electrician responsible for installation must check to ensure that the electrical
connection is in accordance with the standard, including the earth terminal.
â–ª It is necessary to check the rated current of the electric contact with protective switch - this
must be 30mA.
6.2 Earth
The water pump must be well earthed. Short-circuiting will render the relevant articles of the
guarantee invalid. If it is necessary to increase the length of the original cable, a cable with the
same section as the original cable must be used.
7 OPERATION
The pumps are not self-priming pumps. This means that the suction hose should first of all be
fitted with:
1 Non-return valve with filter; this ensures that, after disconnecting the pump, the hose
and the pump do not run dry. This part of the hose is suspended in the water to be
pumped away.
2 Hose with coupling nut; this end of the hose is attached to the front of the pump.
3 Both accessories should be securely screwed on to the hose using a hose clip.
POWXG9576 EN
Copyright © VARO NV 2020 P a g e | 6www.varo.com
11 TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The electric motor is
running but the pump
does not suck water
After the pump
starts, the pump
body does not fill
with water
Fill the pump with water
Insufficient tightness
of the suction hose
Check the recommended and used pans
and components of the pump, e.g. joint of
the suction nose, joint of the pressure hose,
clamping ring, suction hose, etc., including
screw sealing strip made from Teflon or
hemp cord. The pump can work only when
well sealed
The filter screen of
the non-return valve
of the sucking inlet is
blocked
Clean the non-return of the sucking inlet and
the filter screen
The air can't be
released from the
pressure hose
because the water
outlet is closed
When the pump starts sucking, open the
water outlet (e.g. the tap. sprinkling nozzle
etc.)
The waiting time
does not correspond
to the regulations
Fill the whole suction hose with water, or
recheck it at least 7 minutes after the pump
starts
Excessive suction
head (>8m)
Reduce the suction head
The -return fails non
to suck water
Check the water level of the well or the
water pool. If possible, increase the length
of the suction hose.
The electromotor
cannot run
No power supplied
Check the power supply
The ventilator hood
obscures rotation of
the vane
Pull out the power plug, remove the
ventilator hood with a screwdriver, then
reinstall it again by slightly rotating the vane
and check to see if it rotates freely
Fan blocked
Pull out the power plug, move the shaft with
the screwdriver through the ventilator hood.
If the shaft is blocked, send it to a service
center for inspection
Insufficient water flow-
out
Excessive suction
head (>8m)
Check the suction head
The filter screen of
the non-return is
blocked
Clean the filter screen
The suction water
level lowered too
much
Immerse the non-return in deep water


Produktspezifikationen

Marke: Powerplus
Kategorie: Pumpe
Modell: POWXG9576

Brauchst du Hilfe?

Wenn Sie Hilfe mit Powerplus POWXG9576 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Pumpe Powerplus

Bedienungsanleitung Pumpe

Neueste Bedienungsanleitung für -Kategorien-