Power Dynamics PDM-M1204A Bedienungsanleitung

Power Dynamics DJ Ausrüstung PDM-M1204A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Power Dynamics PDM-M1204A (24 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

PDM-Series Powered Music mixers

Ref. nr.: 172.610; 172.612; 172.614; 172.616

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in

order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 16A fuse.10-

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the fixture on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic field. Keep this unit at least 60cm away from

computer or TV.

- This unit is with built acid rechargeable battery. - -in lead

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged please replace with same

specifications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualified technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit off prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- -The mains voltage is 220 240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the is indicated on this type of power supply must be connected. Check that the mains product

voltage corresponds to this, all other voltages than specified, the product be irreparably damaged. The product must also be

directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or fire.

CONTROL ELEMENTS

1. M icrophone Input

Balanced XLR input jacks.

2. LINE Input

Balanced 6.3mm (¼”) jack line inputs. You can connect either balanced or unbalanced phone

plugs to these jacks.

3. TRIM Control

Adjusts the input signal level. To get the best balance between the S/N ratio and the dynamic

range, adjust the gain so that the lights only occasionally and briefly on the peak (8) indicator

highest input transients. The +10dB to +60dB scale is the MIC input adjustment range. The +10dB

to -40db scale is the line input adjustment range.

4. 3- BandsEqualizer

T -hree band equalizer adjusts the channel's high, mid and low frequency bands. Setting the knob to

the "O" position produces a fiat response in the corresponding band. Turning the knob to the right

boosts the corresponding frequency band, while turning to the left attenuates the band.

5. FX Control

Adjusts the effect signal level.

6. PAN Control

The PAN control determines the position of the channel signal within the stereo image. When

working with subgroups, you can use the PAN control to assign the signal to just one output, which

gives you additional flexibility in recording situations.

7. ON/OFF Switch

Turn this switch on to send the signal to master. The switch lights when on.

8. Peak LED

The peak led - lights up when the input signal is driven too high. If this happens, back off the TRIM

control and, if necessary, check the setting of the channel EQ.

9. Solo Switch

The solo switch is used to route the channel signal to the solo bus (Solo In Place) or to the PFL

bus (Pre Fader Listen). This enables you to listen to a channel signal without affecting the main

output signal.

10. Channel Fader

Adjusts the level if the channel signal. Use these faders to adjust the balance between the various

channels.

11. Line Input

These RCA jacks input for stereo sound source. Use this jacks when you want to connect a CD

player directly to the mixer.

12. Line Output

These RCA jacks can be connected to an external recorder.

13. FX Output

The outputFX jacks carries the master aux mix (from the channel FX controls). You can connect this to an external

effects device to process the FX bus.

The processed FX-signal can then be brought from the effects device back into

the stereo Return jacks.

14. Returns stereo

The stereo aux return jacks generally serve as the return for the effects mix (created using the post-fader aux sends)

by connecting the output of an external effects device.

Produktspezifikationen

Marke:	Power Dynamics
Kategorie:	DJ Ausrüstung
Modell:	PDM-M1204A
USB Anschluss:	Ja
Kopfhörer-Anschluss:	6,3 mm
Breite:	530 mm
Tiefe:	350 mm
Gewicht:	8900 g
Produktfarbe:	Schwarz
Höhe:	125 mm
AC Eingangsspannung:	220-240 V
AC Eingangsfrequenz:	50-60 Hz
Stromverbrauch (Standardbetrieb):	200 W
Betriebsanleitung:	Ja
Anzahl Kanäle:	2 Kanäle
THD, totalklirren:	0.01 %
Mikrofon-Eingangsimpedanz:	2 Ohm
Rack-Einbau:	Ja
Frequenzbereich:	10 - 45000 Hz
Kopfhörerausgang:	Ja
XLR-Eingang:	Ja
Digital sound Bearbeitung:	24 Bit
Output Widerstand:	8 Ohm
Line-Eingänge (RCA):	1
Geräuschkulisse:	Echo
Mikrofon Signal-to-Noise Ratio (SNR):	112 dB
DJ Mischer:	Ja
Max. Ausgangspegel (Master, unausgeglichen, L,R):	1V