Posiflex SA-205Z Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Posiflex SA-205Z (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Page 1 / 2
SA-204/205 Series
UPGRADE KIT
USER’S MANUAL
Rev. : A0
I. FEATURES`
 iButton Upgrade kit for POS terminal XT-3114/3214 and XT-3015/4015/3215/3215I series
 Optional iButton reader
 Low-speed type USB (KB Emulation) interface/USB virtual COM port interface
 Total power consumption: 30mA @ 5V DC through proprietary USB port
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult
his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology, Inc. further
disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire risk
arising out of the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit SA-204/205 for the Posiflex fan/fan free touch
terminals XT-3114/3214 and XT-3015/4015/3215/3215I system. This series of products incorporate 2 delicately designed POS peripherals each can be used as
an excellent tool to accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual
and operational aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized
distributors.
The manufacturer of the SA-204/205 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice
due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any
of our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.
 Copyright Posiflex Technology, Inc. 2013
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technology, Inc. the publisher of this documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technology, Inc. an ISO-9001 and ISO-14001 certified manufacturer.
Other brand and product names are trademarks and registered trademarks and service marks of their respective
owners.
II. HARDWARE INSTALLATION
SA-204/205 is an iButton Reader attachment, SA-204 is for the XT-
3114/3214 and SA-205 is for XT-3015/4015/3215/3215I terminal series.
iButton is a rugged data carrier that serves as an electronic registration number
or automatic identification.
For SA-205 series ordered with the XT 15” host system, it is separately
delivered from the system at delivery and needs to be fixed onto the system
per the following instructions before use.
Step A: Remove these 2 screws to remove the side mount cover on the back of the right
side mount upgrade kit.
Step B: Take out the cable inside this side mount cover as circled in below picture and
connect the SA-205 cable to the indicated one of 2 connectors fixed on the main
board inside the side mount cover of XT-3015/4015/3215/3215I.
Step C: Gently arrange the excessive length of this cable back in the hole and use the 2
original screws to fit SA-205 back to the position originally occupied by the
cover. Please reserve the cover if there is a chance to have the side mount kit
removed in the future.
For SA-204 series ordered with the XT-14” host system, it is separately delivered from
the system at delivery and needs to be fixed onto the system per the following
instructions before use.
P/N:
1860090
3
0
1
0
T31454
Page 2 / 2
Step A: Remove the 2 circled screws in the below picture to remove the side mount
cover on the back of the right side mount upgrade kit.
Step B: Take out the cable inside this cover as circled in the below picture and connect
the SA-204 cable to the indicated one of the 2 prolonged connectors inside the
side mount upgrade kit as indicated.
Step C: Gently arrange the excessive length of this cable back in the hole and screw-fit
it back to the position originally occupied by the cover. Please reserve the cover
if there is chance to have the side mount kit removed in the future.
II.
DRIVER INSTALLATION
1. For Virtual COM Port: The configuration of the iButton reader can be programmed
through the virtual COM port with driver installation (as the
application software requires). A virtual serial port is a
redirector driver used in USB interface which is usually used to
create a pair of back-to-back virtual COM ports on the same
computer. It can then communicate using virtual serial ports
instead of conventional inter-process communication
mechanisms. You are only required to set the virtual COM port
to be enabled in POS system by automatically installing the
Virtual COM port driver program supported by Posiflex. Refer
to “Operation Guide” for manipulation over the reader
configuration.
2. : There is no need to install USB (KB Emulation) driver to enable For USB (KB Emulation)
SA-204/205. It operates as a USB KB and therefore requires no
driver installation. You only need to set the USB keyboard to be
enabled in POS system if the OS does not do it automatically.
Refer to “Operation Guide” for manipulation over the reader
configuration.
III. OPERATION GUIDE
iBUTTON READER
Each iButton receptor is delivered with 1 iButton key attached. Each iButton key carries a
unique ID. Whenever the user places an iButton key to the reading area of the iButton
reader, the key will stick to the reader by magnetism and the unique ID will be sent to the
XT system through virtual COM interface/USB KB Emulation. Please approach your
dealer for purchase of any additional iButton key required.


Produktspezifikationen

Marke: Posiflex
Kategorie: Nicht kategorisiert
Modell: SA-205Z

Brauchst du Hilfe?

Wenn Sie Hilfe mit Posiflex SA-205Z benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Posiflex

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-