Posiflex PD-2604UE Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Posiflex PD-2604UE (17 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/17
PD2800 UE
FCC Notes:
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions manual, may cause interference to radio
communications. It has been tested an found to comply with
limits for a Class A digital device pursuant to subpart J of
Part 15 of FCC Rules, which are designed to provide
reasonable protection against interference when operated in
a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case
the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other
than the authorized technicians opens the machine. The user
should consult his/her dealer for the problem happened.
Warranty voids if the user does not follow the instructions in
application of this merchandise. The manufacturer is by no
means responsible for any damage or hazard caused by
improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the
content in this manual. However, Posiflex will assume no
liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct,
indirect, incidental, consequential or otherwise damages,
including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly
disclaims any warranties, expressed, implied or statutory, including without
limitation implied warranties of merchantability or fitness for particular purpose,
good title and against infringement.
The information in this manual contains only essential hardware concerns for
general user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from web sites: http://www.posiflex.com or
http://www.posiflex.com.tw All data should be backed-up prior to the installation of any drive unit
or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product. All rights are strictly reserved. No part of
this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, mechanical, photocopying, or otherwise, without prior express written
consent from Posiflex Technologies, Inc. the publisher of this documentation.
Š Copyright Posiflex Technology, Inc. 2014
All brand and product names and trademark are the property of their respective holders.
PD – 260XUE/2800UE Series
User’s Manual
Rev. B0
P/N:
19460901180
PD2600UE
PD2601UE
PD2602UE
PD2603UE
PD2604UE
PD2605UE
PD2606UE
PD2607UE/
2608UE
Page 2
Power Setup Notice
√ This device is particularly designed for use with a Posiflex system. In such application, it can
utilize power support from the Posiflex system.
PRODUCT MODEL NUMBER
FEATURES
• VFD (Vacuum Fluorescent Display) with dark blue character and
yellow green back-light
• Rear mount Pole Display for Posiflex HT series hybrid terminals or
PB series discrete systems or KS or FT series fan free touch POS
terminals or TP series touch POS terminals
• Two-line display with 20 characters per line
• Various command emulation modes selectable by DIP switch
• Support 18 Code Pages of 128 characters each
• Support 12 international character sets of 12 characters each
• ° Display frame can rotate horizontally 270 freely (PD-
2600UE/2601UE/2602UE/2603UE/2605UE)
• Easy viewing characters (9.03 mm by 5.25 mm)
• Long life and trouble free operation
• Simple installation
• 3 typical USB interface modes (USB-HID Class, USB-Vendor
Class, Virtual COM Port) selectable by DIP switch
• Supports UPOS1.8
• Euro and Rupee dollar signs supported
Page 3
INSTALLATION GUIDES
PD-2800UE
This adjustment has to be done by a qualified electronic technician to follow
the guide from relevant technical manual.
The power of PD-2800 UE supported through USB
connection. For PD-2800 UE customer display, there
are two USB connecter needed to link to the host
system. Please confirm that both of these two USB
connecters connect to terminal in order to support the
power and data transmission.
PD-260XUE
The USB interface model of all PD-2600UE series should be connected
directly to an USB port and must not be through any non-self-powered USB
HUB to get power through the USB port itself and there is no need for other
special arrangement.
Except for PD-2600UE which is noted for stand-alone power adaptor supply,
the I/O plate area of rear bottom side is as follows below:
The RJ45 type modular connector is for VFD display purpose and also already
occupied. Connect the “B” type plug of the interface cable to the base USB
connector and the “A” type end to USB port of the host. Insert the DC plug of
12V DC power adaptor to the “12V DC IN” jack in the pole base.
You may now place the base on a horizontal surface and prepare to power on
and adjust the direction of the display head for best viewing effect in
application.
MECHANICAL INSTALLATION
12V DC Jack
B-Type USB Port To Display Head


Produktspezifikationen

Marke: Posiflex
Kategorie: Nicht kategorisiert
Modell: PD-2604UE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Posiflex PD-2604UE benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Posiflex

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-