Pioneer DJM-5000 Bedienungsanleitung

Pioneer Mischpult DJM-5000

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Pioneer DJM-5000 (37 Seiten) in der Kategorie Mischpult. Dieser Bedienungsanleitung war fĂĽr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/37
DJ MIXER
TABLE DE MIXAGE
DJM-5000
Operating Instructions
Mode d’emploi
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE RTS PA
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_A1_En
NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE
APPLIANCE BOTTOM.
P1-4-2-2_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to rt 15 of the FCC les. These limits are designed to provide Pa Ru
reasonable protection against harmful inte erence in a residential installation. This rf
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful inte erence to radio rf
communications. Howeve there is no guarantee that inte erence will not occur in a r, rf
particular installation. If this equipment does cause harmful interference to radio or
television receptio which can be determined by turning the equipment off and on, the n,
user is encouraged to try to correct the inte erence by one or more of the following rf
measures:
— orient or relocate the receiving antenna.Re
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_A1_En
Information to User
Alterations or modifications carried out without appropriate authorization may invalidate
the user’s right to operate the equipment. D8-10-2_A1_En
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. prevent electromagnetic inte erence with electric To rf
appliances such as radios and televisions, use shielded cables and connectors for
connections. D8-10-3a_A1_En
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC les. Operation is subject to the following two conditions: (1) This Ru
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
oduct Name: DJ MIXERPr
Model Numbe DJM-5000r:
Responsible rty Name: PIONEER ELECTRONICS (USA), INC.Pa
SERVICE SUPPORT DIVISION
Address: 1925 E. DOMINGUEZ ST. LONG BEAC CA 90810-1003, U.S.A.H,
Phone: 1-800-421-1404
URL: http://www.pioneerelectronics.com
D8-10-4*_B1_En
This Class B digital apparatus complies with
Canadian ICES-003.
D8-10-1-3_A1_En
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filled
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture. D3-4-2-1-3_B_En
WARNING
The voltage of the available power supply differs
according to country or gion. Be sure that the re
power supply voltage of the area where this unit
will be used meets the quired voltage (e.g., 230V re
or 120V) written on the rear panel. D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment. D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 5 cm at rear, and 3 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. placement and Re
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when le unused ft
for a long period of time (for example, when on
vacation).
D3-4-2-2-1a_A1_En
CAUTION
The POWER switch on this unit will not completely
shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for
the unit, you will need to unplug it from the AC outlet
to shut down all power. Therefore, make sure the
unit has been installed so that the power cord can
be easily unplugged from the AC outlet in case of an
accident. avoid fire hazard, the power cord should To
also be unplugged from the AC outlet when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-2a_A_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002*_En
When using this product follow the instructions
written on the underside of the unit, which
concern rated voltage, etc. D3-4-2-2-4_En
IMPORTANT NOTICE
THE SERIAL NUMBER FOR THIS EQUIPMENT IS
LOCATED ON THE BOTTOM.
PLEASE WRITE THIS SERIAL NUMBER ON UR YO
ENC SED RRANTY CARD AND KEEP IN A LO WA
SECURE AREA. THIS IS FOR UR SECURITY.YO
D1-4-2-6-1*_A1_En
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
D36-P4_A_En
Wash hands after handling


Produktspezifikationen

Marke: Pioneer
Kategorie: Mischpult
Modell: DJM-5000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pioneer DJM-5000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mischpult Pioneer

Bedienungsanleitung Mischpult

Neueste Bedienungsanleitung fĂĽr -Kategorien-