Philips HTL8120 Bedienungsanleitung

Philips Soundbar HTL8120

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips HTL8120 (1 Seiten) in der Kategorie Soundbar. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Warranty
1. Proof of purchase s ot omp ied with this warranty rd. i n acc an ca
2. The warranty card is not completed immediately after purchase.
3. The apparatus is not used according to this user manual.
4. Defects re used due to proper or reckless use. a ca im
5. Any repairs are done by persons other than Philips authorized service centre.
6. The serial number is tampered with.
7. Defects due to uses beyond ca control like light g, bnormal oltage or while tr sit to the nin a v in an
purchaser’s residence.
Product Sl. No.Model No.
Invoice Number Date of Purchase: / /
Customer’s Name and address:
PIN:
Always there to help you!
Visit us at www.support.philips.com
Helpline: 1800 425 6396
Email: india.callcentre@tpv-tech.com
(10 a.m. to 9 p.m. Mondays to Saturdays & 10
a.m. to 6 p.m. on Sundays)
Deal r e Name & S :tamp
This Philips soundbar is warranted against any defect due to defective materials or workmanship for 12 months
from the date of purchase, should a defect develop during the warranty, TPV Technology India Pvt. Ltd.,
its authorized service center in India.
FREE OF CHARGE at any of
Bluetooth Operating Instruction
1. R m Press SOU CE key fro soundbar or re ote Bluetoothm c ontrol to mode;
2. the When selecting Bluetooth “bt.” in displaymode. “.” of will start bli king and you hear n will an audio
n to e which Bluetooth pairing indicates mode.
3. obile mFor pairing with pho devne or other Bluetooth ices, se the dev med “Pharch ice na ili d ps HTL8120 an
pair it. Once paired, “.of “bt.” slowly ash and come up with another audio tone. “.” of “bt.will stop ash
when playing music.
4. n Press a d hold con n con for 3 se ds from remote control i order to force dis nect the
. Bluetooth connection
Note: While using Bluetooth, if external call comes, then speaker s ystem goes in mute mode in
order cy m ato protect priva of obile phone user. Oper tio then ce resumes on call is dis on ected.c n
10987 11
总尺寸:660x173mm
工艺:风琴105G铜版纸 双面印刷
成品尺寸:110x86.5mm
30408L000101-002
成品正面: 成品背面:
Soundbar
HTL8120
User ma alnu
SOUNDBAR
H TL 8120
User manual
General information
Safety instructions
Plea r carefully t safety mark on se ead he the back side
This mark is intended to alert the user from
the non isolated dangerous voltage within the
constitute a risk of electric shock to persons.
This mark is intented to alert the user for
important operating and servicing instruction.
Warnings
Avoid sustained periods on high-volume use, and
do not turn the volume to maximum level while using
high output signal, such as Mobile Phone or DVD,
etc., as this will cause distortion and may damage the
loudspeaker cones.
when not in use.
Do not open the cover or back panel to avoid
electrical shock or any other accidents. No user-
serviceable parts are inside.
Only for indoor use.
Plug the system to the AC outlet with the right voltage
marked on the back panel of the Subwoofer.
The MAINS plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Accessories
The product shall not be exposed to dripping or splashing
be placed on the product.
Connections
Soundbar back panel
Top panel operation
Troubleshooting
Problem Solution
1. No power.
2. No sound or distorted sound.
3. The remote control does not
function properly.
4. Low hum or buzz sound.
drive cannot be read.
6. Slow operation of the USB
Check if the AC power cord is properly inserted into the AC mains socket.
Adjust the volume / select the correct source to choose the equipment
that you want to hear through the system.
Reduce the distance between the remote control and the system. Replace
the batteries with new ones / Point the remote control directly towards the
IR sensor (located on front panel of the subwoofer) / Check that the batteries
Place the product as far away as possible from electrical devices that may be
causing interference / Check power supply voltage and consult electrician.
Drive is
7. BT not working. Reduce the distance or device is not paired.
Warning -
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty.
below before taking the system for repair. If you are unable to remedy the problem by following hints
mentioned in below table.
and play. / Take out USB drive and insert it again properly.
1. AC Power cord.
2. Input Connect to sound sources such as computer, CD player, MP3, etc.
3. Optical Input.
4. USB* Slot.
5. HDMI ARC Input.
(1)
(1) (2) (5)(3) (4) (6)
(3)(2) (5)(4)
1. /SOURCE
2.
3.
4.
5. VOL-
6. VOL+
System sipo tioning :
The soundbar is recommended to be put on
the at desktop to get a better acoustic eect.
Helpful Hint:
- To avoid magnetic interference, do not position
the speakers, too close to your TV.
Playing the speakers
Audio source / player
SOUNDBAR
VOL- VOL+
Remote controls
* AVAILABLE IF CONNECTED
(1)
(2)
(8)
(4)
(5)
(9)
(14)
(12)
(3)
(7)
(10)
(11)
(13)
(6)
RESET MUTE
VO L-
BT
AUD
TONE
USB
ARC OPT
VOL+ 1. : Power ON or Standby mode.
2. RESET: To set the treble/bass and volume to default level.
3. MUTE: Turn volume o. Short press again to activate.
4. VOL+: To increase the Volume by short or long press VOL+.
5. : Play the previous song by pressing “ ” but not in audio mode.
6. : Play/pause in USB*/BT mode and MUTE in audio mode.
7. : Play next song by pressing “ ”, but not in audio mode.
8. VOL-: To decrease the Volume by short or long press VOL-.
9. BT: Bluetooth mode.
10. ARC: HDMI ARC mode.
11. OPT: Optical mode.
12. AUD: Audio input mode.
13. USB: USB* mode.
14. TONE : Press to adjust Bass&Treble settings by using VOL+/-
buttons. Bass&Treble levels: -6(min) +6(max). ~
1. 2. RESET 3. MUTE 4. VOL+ 5. 6. 7.
8. VOL- 9. BT 10. ARC 11. OPT 12. AUD 13. USB 14. TONE
* AVAILABLE IF CONNECTED
Total system power 120W RMS
Separation
SNR
Audio input socket 2RCA- 2RCA cable
Power consumption 24.1 W
Soundbar 3 Way
Speaker size
5.25 inches*2+2.5 inches*4+1 inches*2
Impedance 8 Ohm+4 Ohm+4 Ohm
Frequency range 60Hz - 20KHz
Dimension (mm) W x H x D 960 x 95 x 201
Weight kg6.67
BT versio V5. n 0
BT range
USB max capacity
playability
Up to 32GB
Up to 10 meters
MP3 track
> db55
>40db
Care and safety information
Avoid high temperatur , mo ture, water and stes is du
Apparatus should not be exposed to dripping or
splashing of liquid.
Do not place any source of danger on the Subwoofer,
Do not install near heat sources.
Do not block any ventilation opening
Place the apparatus in a location with adequate
ventilation to prevent internal heat build up. Allow at
least 10cm (4 inches) of free space all around the
apparatus for adequate ventilation.
At high volume the back cover of Subwoofer becomes
hot. Do not touch it.
Care of the cabinet
Use a soft cloth slightly moistened to clean the cabinet.
Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Attentio should be draw to the environmental n n
aspects of batter disposal.y
Batteries shall not be exposed to e essive heat such s xc a
Remark:
In order not to disturb in the dark, the LED display of soundbar is set to be dim after
30 seconds if there is no operation, and display o after another 90 seconds.
You can press any button to resume.
Remark:
In order not to disturb in the dark, the LED display of soundbar is set to be dim after
30 seconds if there is no operation, and display o after another 90 seconds.
You can press any button to resume.
***Do NOT use USB for ch ar ging devices which c an caus e damage to
you exter nal devi cer s.thank you.
US B
Item Remote control User manual
Quantity 1
2RCA- 2RCA cable
1 1 1
optical cable
1
power cord
AC IN R
AUDIO IN
L OPT ARC
1. /SOURCE: The Speaker system is in stand by mode when power on, with
white LED “----”. Short press the “ /SOURCE” to select appropriate source.
Keeping the “ /SOURCE” key pressed for long will go back to stand by mode.
You can toggle through the input modes by pressing the “ /SOURCE ” key,
“bt” denotes Bluetooth Mode, “Hd” denotes HDMI ARC Mode,
“OP” denotes Optical Mode, “AU” denotes Audio Mode, “Ud” denotes USB* mode.
2. : Play/Pause the songs.
3. : Play the previous song.
4. : Play next song.
5. VOL-: To decrease the Volume.
6. VOL+: To increase the Volume.


Produktspezifikationen

Marke: Philips
Kategorie: Soundbar
Modell: HTL8120

Brauchst du Hilfe?

Wenn Sie Hilfe mit Philips HTL8120 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Soundbar Philips

Bedienungsanleitung Soundbar

Neueste Bedienungsanleitung für -Kategorien-