Philips HSP5300 Bedienungsanleitung
Philips
Intercomsysteem
HSP5300
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips HSP5300 (2 Seiten) in der Kategorie Intercomsysteem. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
EN EN Digital manual
AR AR
EN Home safety
AR
EN Doorbell
AR
EN Welcome, Get started!
AR
ENGLISH
Thank you for purchasing a Philips Home Safety product.
To get started, please download the Philips home safety app to set up and
manage all your devices directly from your phone.
Simply connect to your home Wi-Fi and enjoy total control.
1. Important information
• Do not handle adapters, plugs or the mains cord with wet hands.
• Make sure the wall is solid enough to support the doorbell.
•
• CAUTION 5 V 2 A/1.5 A DC ONLY.
• If the doorbell housing is damaged in any way, do not use.
• After setting up the doorbell, maintain an operating distance of at least
20 cm between the device and user.
• The doorbell has a Wi-Fi module, 2.4 GHz 802.11 b/g/n, with a
maximum power output of 68 mW EIRP.
2. What’s in the box
4x
2x 2x 2x 2x
3. Getting started
• Please have your Wi-Fi network name and password at hand.
• Make sure your mobile device is running IOS 15 or higher or Android 8
or higher.
•
Download and open the app:
• Search for
“ ” in the Philips Home Safety
app store or scan the QR code.
• Download and install the app.
•
and usage, please click the
“ ” button to create an register
account. If you already have
an account, click the “ ” button.Login
Light indications:
• Power-on: White light - Steady on for about 2s
•
•
•
•
•
up phase
•
• Charging: Amber light - Steady on
•
•
•
•
4. Setting up
Step 1:
charging entrance.
Step 2: Plug in the USB cable to charge.
Step 3: Pair the doorbell with app by pressing the Reset button next to the
charging entrance. Press for 5 seconds and wait for the audio feedback.
Step 4: (Optional) Open the side rubber lid by hand, and insert the Micro
SD card.
Note:
• Operating temperature in discharge mode: –20°C to +50°C
•
• Make sure you have a strong Wi-Fi signal of at least –50 dBm.
1 2
5S
3 4
Basic operations
Power on: Long press the Button
for 2 seconds.
Power o: Press the Button three
times within 2 seconds.
Reset: Long press the Reset
button for 5 seconds.
5. Where to place it
Step 1: Check if you can reuse
existing holes and anchors.
Step 2: When drilling new
holes, mount the doorbell at
a recommended height of
ground. 1.76m
0.5m
1.2m
6. How to place it
Wireless installation with charging the doorbell beforehand:
Step 1: Fully charge the doorbell. You can see the battery status in the live
feed in the app.
Step 2:
Step 3: Uninstall the existing doorbell from the wall.
Step 4: Check if the view
is correct or if you need to
install the angle bracket as
well, as shown in the image.
Step5: Mount your bracket
on the wall with mounting
screws and the mounting
plate, as shown in the
image.
Step 6: Mount the doorbell
on the bracket. Align the
doorbell on bottom and
then push up, than snap it
on the top.
Wall
Wired installation with existing doorbell wires and chime:
Step 1:
Step 2: Use the provided jumper
cable to connect both terminals in
your doorbell’s chime, one cable end
to ‘Front’ and the other to ‘Trans’.
Step 3: Uninstall the existing doorbell from the wall, carefully pull
out the wires, and straighten the wire ends if needed.
Step 4: (Optional) Install wall anchors.
•
push in the provided anchors.
• For wood, skip this step.
Step 5: Check if the view
is correct or if you need to
install the angle bracket as
well, as shown in the image.
Step 6: Mount your bracket
on the wall with mounting
screws and the mounting
plate, as shown in the
image.
Wall
Step 7: Connect the wires to the doorbell using the small terminal screws.
Option 1: Screw in the small
terminal screws halfway.
Form a small circle with the
wire ends and loop them
around the screws. Finally,
tighten the small terminal
screws to securely fasten the
wires to the doorbell.
Option 2: For short doorbell wires, use
extensions. Attach them to your existing
wires, twist together, and secure with gray
screw tops. Connect the V-shaped end to
the doorbell and screw in terminal screws
halfway. Join the V-shaped ends and tighten
screws for a secure connection.
Step 8: Mount the doorbell on the bracket.
Align the doorbell on bottom and then push
up, than snap it on the top.
7. How to remove it
If you want to recharge or reset the doorbell, remove
the doorbell from the bracket.
8. How to use it with the chime
A separately sold compatible chime can be inserted into
any power outlet in your home, allowing you to place it
wherever you prefer.
9. Electromagnetic elds (EMF)
This appliance complies with the applicable standards
10. Recycling
• This symbol means that electrical products and batteries shall
not be disposed of with normal household waste.
• Follow your country’s rules for the separate collection of
electrical products and batteries.
Removal of built-in rechargeable battery
•
professional when the appliance is discarded. Before removing the
battery, make sure that the appliance is disconnected from the wall
socket and that the battery is completely empty.
Home Safety
Doorbell
HSP5300
PHILIPS and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used under
license.
This product has been manufactured by and is sold under the
responsibility of Versuni Holding B.V., and Versuni Holding B.V.
is the warrantor in relation to this product.
2023 © Versuni Holding B.V.
688001000416 12/19/2023
Take any necessary safety precautions when you handle tools to open the
appliance and when you dispose of the rechargeable battery.
When you handle batteries, make sure that your hands, the product and
the batteries are dry.
To avoid accidental short-circuiting of batteries after removal, do not
terminals or put batteries in a plastic bag before you discard them.
11.
Storage
Wi-Fi IEEE 802.11 b/g/n, support 2.4GHz
Operating humidity 10% to 95%, no condensation
RF output power 17.5 dBm
General power 8–24 V AC, 50/60 HZ, 200 mA or 5 V DC, 1.5 A
12. Warranty and support
This warranty is not valid if a defect is due to incorrect use or poor
consumer. For more information or for invoking the warranty, please visit
our website .home.id/HSP5300
.Philips Home Safety
Philips Home Safety
Wi-Fi
1 .
•
•
•
• 1,5 2 5
•
• 20
• 802.11 b/g/n 2,4 WiFi
68 EIRP
2 .
4x
2x 2x 2x 2x
3 .
• Wi-Fi
• Android iOS 15
8
• 5 2,4 Wi-Fi
•
» «Philips Home Safety
QR
•
•
«
.»
•
• • Beep_A
•
•
•
•
•
•
• • SD
•
4 .
USB :2
:3
5
.Micro SD 4
:
• 50 20–
• 45 0
• 50 Wi-Fi
12
5S
34
5
5 .
:2
48
1,2
1,76
0,5
1.2
6 .
:2
:3
:4
:5
:6
:2
Front
Trans
:3
4
•
•
:5
:6
:7
:1
:2
V
V
:8
7 .
8 .
9 .
10 .
•
•
•
11 .
128 Micro SD
Wi-Fi 2,4 802,11 b/g/n IEEE
95 10
17,5
1,5
12 .
Versuni
.home.id/HSP5300
Produktspezifikationen
| Marke: | Philips |
| Kategorie: | Intercomsysteem |
| Modell: | HSP5300 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Philips HSP5300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Intercomsysteem Philips
4 September 2024
4 September 2024
Bedienungsanleitung Intercomsysteem
- Intercomsysteem SilverCrest
- Intercomsysteem Panasonic
- Intercomsysteem Alecto
- Intercomsysteem EMOS
- Intercomsysteem Gira
- Intercomsysteem König
- Intercomsysteem Abus
- Intercomsysteem Avidsen
- Intercomsysteem Elro
- Intercomsysteem Smartwares
- Intercomsysteem GEV
- Intercomsysteem Marmitek
- Intercomsysteem Midland
- Intercomsysteem Monacor
- Intercomsysteem Comelit
- Intercomsysteem DoorBird
- Intercomsysteem Extel
- Intercomsysteem M-e
- Intercomsysteem Siedle
- Intercomsysteem Fanvil
- Intercomsysteem HQ
- Intercomsysteem Busch-Jaeger
- Intercomsysteem Sygonix
- Intercomsysteem Hikvision
- Intercomsysteem DIO
- Intercomsysteem Estom
- Intercomsysteem Steren
- Intercomsysteem ACTi
- Intercomsysteem Vimar
- Intercomsysteem Hollyland
- Intercomsysteem Dahua Technology
- Intercomsysteem Becken
- Intercomsysteem Russound
- Intercomsysteem Hanwha
- Intercomsysteem Aiphone
- Intercomsysteem RTS
- Intercomsysteem Axis
- Intercomsysteem EtiamPro
- Intercomsysteem Chacon
- Intercomsysteem Fibaro
- Intercomsysteem COMMAX
- Intercomsysteem Sonifex
- Intercomsysteem Vibell
- Intercomsysteem CyberData Systems
- Intercomsysteem WHD
- Intercomsysteem NuTone
- Intercomsysteem Valcom
- Intercomsysteem Pentatron
- Intercomsysteem FlyingVoice
Neueste Bedienungsanleitung für -Kategorien-
15 September 2024
12 September 2024
12 September 2024
9 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024