Panamax MB850 Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Panamax MB850 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĆ¼r 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
ī˜‘ī˜–ī˜™ī˜ī˜€#ORPORATEī˜€#IRCLEī˜Œī˜€0ETALUMAī˜Œī˜€#!ī˜€ī˜™ī˜”ī˜™ī˜•ī˜”ī˜€ī˜€ī˜€sī˜€ī˜—ī˜ī˜—ī˜ī˜’ī˜˜ī˜“ī˜ī˜•ī˜™ī˜ī˜ī˜€ī˜€ī˜€sī˜€ī˜€ī˜€WWWī˜ŽPANAMAXī˜ŽCOM
IMPORTANT SAFTEY WARNINGS
4HISī˜€MANUALī˜€CONTAINSī˜€IMPORTANTī˜€SAFETYī˜€INSTRUCTIONSī˜Žī˜€0LEASEī˜€READī˜€ANDī˜€FOLLOWī˜€
ALLī˜€INSTRUCTIONSī˜€CAREFULLYī˜€DURINGī˜€INSTALLATIONī˜€ANDī˜€OPERATIONī˜€OFī˜€THEī˜€UNITī˜Žī˜€2EADī˜€
THISī˜€MANUALī˜€THOROUGHLYī˜€BEFOREī˜€ATTEMPTINGī˜€TOī˜€UNPACKī˜Œī˜€INSTALLī˜Œī˜€ORī˜€OPERATEī˜€YOURī˜€
503ī˜Ž
CAUTION!ī˜€4Oī˜€PREVENTī˜€THEī˜€RISKī˜€OFī˜€FIREī˜€ORī˜€ELECTRICī˜€SHOCKī˜Œī˜€INSTALLī˜€INī˜€Aī˜€TEMPERAī˜
TUREī˜€ANDī˜€HUMIDITYī˜€CONTROLLEDī˜€INDOORī˜€AREAī˜€FREEī˜€OFī˜€CONDUCTIVEī˜€CONTAMINANTSī˜Žī˜€
ī˜ˆ0LEASEī˜€SEEī˜€SPECIFICATIONSī˜€FORī˜€ACCEPTABLEī˜€TEMPERATUREī˜€ANDī˜€HUMIDITYī˜€RANGEī˜‰ī˜Ž
CAUTION!ī˜€4Oī˜€REDUCEī˜€THEī˜€RISKī˜€OFī˜€ELECTRICī˜€SHOCKī˜Œī˜€DOī˜€NOTī˜€REMOVEī˜€THEī˜€COVERī˜€
EXCEPTī˜€TOī˜€SERVICEī˜€THEī˜€BATTERYī˜Žī˜€.Oī˜€USERī˜€SERVICEABLEī˜€PARTSī˜€AREī˜€INSIDEī˜€EXCEPTī˜€THEī˜€
BATTERYī˜Ž
CAUTION!ī˜€3OMEī˜€COMPONENTSī˜€CANī˜€BEī˜€ENERGIZEDī˜€BYī˜€THEī˜€BATTERYī˜€WHENī˜€UNITī˜€ISī˜€
UNPLUGGEDī˜Ž
CAUTION!ī˜€503ī˜€MUSTī˜€BEī˜€CONNECTEDī˜€TOī˜€ANī˜€!#ī˜€POWERī˜€OUTLETī˜€WITHī˜€FUSEī˜€ORī˜€CIRCUITī˜€
BREAKERī˜€PROTECTIONī˜Žī˜€$Oī˜€NOTī˜€PLUGī˜€INTOī˜€ANī˜€OUTLETī˜€THATī˜€ISī˜€NOTī˜€GROUNDEDī˜Žī˜€)Fī˜€YOUī˜€
NEEDī˜€TOī˜€DEī˜ENERGIZEī˜€THISī˜€EQUIPMENTī˜Œī˜€TURNī˜€OFFī˜€ANDī˜€UNPLUGī˜€THEī˜€UNITī˜Ž
CAUTION!ī˜€4Oī˜€AVOIDī˜€ELECTRICALī˜€SHOCKī˜Œī˜€TURNī˜€OFFī˜€THEī˜€UNITī˜€ANDī˜€UNPLUGī˜€ITī˜€FROMī˜€THEī˜€
!#ī˜€POWERī˜€SOURCEī˜€BEFOREī˜€SERVICINGī˜€THEī˜€BATTERYī˜€ORī˜€INSTALLINGī˜€Aī˜€COMPUTERī˜€
COMPONENTī˜Ž
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! 0ANAMAXī˜€DOESī˜€
NOTī˜€SELLī˜€PRODUCTSī˜€FORī˜€LIFEī˜€SUPPORTī˜€ORī˜€MEDICALī˜€APPLICATIONSī˜Žī˜€$/ī˜€./4ī˜€USEī˜€INī˜€ANYī˜€
CIRCUMSTANCEī˜€THATī˜€WOULDī˜€AFFECTī˜€OPERATIONī˜€ORī˜€SAFETYī˜€OFī˜€ANYī˜€LIFEī˜€SUPPORTī˜€
EQUIPMENTī˜€ORī˜€WITHī˜€ANYī˜€MEDICALī˜€APPLICATIONSī˜€ORī˜€PATIENTī˜€CAREī˜Ž
DO NOT USE WITH OR NEAR AQUARIUMS!ī˜€4Oī˜€REDUCEī˜€THEī˜€RISKī˜€OFī˜€FIREī˜€ORī˜€
ELECTRICī˜€SHOCKī˜Œī˜€DOī˜€NOTī˜€USEī˜€WITHī˜€ORī˜€NEARī˜€ANī˜€AQUARIUMī˜Žī˜€#ONDENSATIONī˜€FROMī˜€THEī˜€
AQUARIUMī˜€CANī˜€CAUSEī˜€THEī˜€UNITī˜€TOī˜€SHORTī˜€OUTī˜Ž
DO NOT USE WITH AMPLIFIERS OR POWERED SUBWOOFERS!ī˜€4HEī˜€POWERī˜€
DEMANDSī˜€OFī˜€THESEī˜€DEVICESī˜€WILLī˜€OVERLOADī˜€ANDī˜€POSSIBLYī˜€DAMAGEī˜€THEī˜€UNITī˜Ž
MB850 INSTRUCTIONS
INSTALLING YOUR UPS SYSTEM
UNPACKING
)NSPECTī˜€THEī˜€503ī˜€UPONī˜€RECEIPTī˜Žī˜€4HEī˜€BOXī˜€SHOULDī˜€CONTAINī˜€THEī˜€FOLLOWINGī˜š
ī˜ˆī˜‘ī˜‰ī˜€503ī˜€UNITī˜›ī˜€ī˜ˆī˜‘ī˜‰ī˜€5SERī˜‡Sī˜€MANUALī˜›ī˜€ī˜ˆī˜‘ī˜‰ī˜€3OFTWAREī˜€#$ī˜›ī˜€ī˜ˆī˜‘ī˜‰ī˜€53"ī˜€DEVICEī˜€CABLEī˜›ī˜€
ī˜ˆī˜‘ī˜‰ī˜€4ELEPHONEī˜€CABLEī˜›ī˜€ī˜ˆī˜‘ī˜‰ī˜€#OAXIALī˜€#ABLE
OVERVIEW
4HEī˜€-"ī˜˜ī˜•ī˜ī˜€PROVIDESī˜€AUTOMATICī˜€VOLTAGEī˜€REGULATIONī˜€FORī˜€INCONSISTENTī˜€UTILITYī˜€
POWERī˜Žī˜€4HEī˜€-"ī˜˜ī˜•ī˜ī˜€FEATURESī˜€ī˜˜ī˜™ī˜ī˜€*OULESī˜€OFī˜€SURGEī˜€PROTECTIONī˜Œī˜€ANDī˜€PROVIDESī˜€
BATTERYī˜€BACKUPī˜€DURINGī˜€POWERī˜€OUTAGESī˜Žī˜€4HEī˜€-"ī˜˜ī˜•ī˜ī˜€ENSURESī˜€CONSISTENTī˜€
POWERī˜€TOī˜€YOURī˜€COMPUTERī˜€SYSTEMī˜€ANDī˜€ITSī˜€INCLUDEDī˜€SOFTWAREī˜€WILLī˜€AUTOMATIī˜
CALLYī˜€SAVEī˜€YOURī˜€OPENī˜€FILESī˜€ANDī˜€SHUTDOWNī˜€YOURī˜€COMPUTERī˜€SYSTEMī˜€DURINGī˜€Aī˜€
UTILITYī˜€POWERī˜€LOSSī˜Ž
HARDWARE INSTALLATION GUIDE
1.ī˜€9OURī˜€NEWī˜€503ī˜€MAYī˜€BEī˜€USEDī˜€IMMEDIATELYī˜€UPONī˜€RECEIPTī˜Žī˜€(OWEVERī˜Œī˜€
RECHARGINGī˜€THEī˜€BATTERIESī˜€FORī˜€ATī˜€LEASTī˜€ī˜‘ī˜–ī˜€HOURSī˜€ISī˜€RECOMMENDEDī˜€TOī˜€ENSUREī˜€
THATī˜€THEī˜€BATTERYī˜‡Sī˜€MAXIMUMī˜€CHARGEī˜€CAPACITYī˜€ISī˜€ACHIEVEDī˜Žī˜€!ī˜€LOSSī˜€OFī˜€CHARGEī˜€
MAYī˜€OCCURī˜€DURINGī˜€SHIPPINGī˜€ANDī˜€STORAGEī˜Žī˜€4Oī˜€RECHARGEī˜€THEī˜€BATTERIESī˜Œī˜€SIMPLYī˜€
LEAVEī˜€THEī˜€UNITī˜€PLUGGEDī˜€INTOī˜€ANī˜€!#ī˜€OUTLETī˜Žī˜€4HEī˜€UNITī˜€WILLī˜€CHARGEī˜€INī˜€BOTHī˜€THEī˜€
/.ī˜€ASī˜€WELLī˜€ASī˜€THEī˜€/&&ī˜€POSITIONī˜Ž
2.ī˜€7ITHī˜€THEī˜€503ī˜€UNITī˜€OFFī˜€ANDī˜€UNPLUGGEDī˜Œī˜€CONNECTī˜€EQUIPMENTī˜€THATī˜€WOULDī˜€
BENEFITī˜€FROMī˜€BATTERYī˜€BACKī˜UPī˜€SUCHī˜€ASī˜€$62ī˜Œī˜€CABLEī˜€BOXī˜Œī˜€SATELLITEī˜€RECEIVERī˜Œī˜€
$,0ī˜€46ī˜€ORī˜€GAMINGī˜€CONSOLEī˜€INTOī˜€THEī˜€BATTERYī˜€POWERī˜€SUPPLIEDī˜€OUTLETSī˜Žī˜€0LUGī˜€
OTHERī˜€EQUIPMENTī˜€INTOī˜€THEī˜€FULLī˜TIMEī˜€SURGEī˜€PROTECTIONī˜€OUTLETSī˜Ž
3.ī˜€4Oī˜€SURGEī˜€PROTECTī˜€Aī˜€NETWORKī˜€CONNECTIONī˜Œī˜€CONNECTī˜€
Aī˜€NETWORKī˜€CABLEī˜€FROMī˜€THEī˜€WALLī˜€JACKī˜€OUTLETī˜€TOī˜€THEī˜€
).ī˜€JACKī˜€OFī˜€THEī˜€503ī˜Žī˜€4HENī˜€CONNECTī˜€Aī˜€NETWORKī˜€CABLE
FROMī˜€THEī˜€/54ī˜€JACKī˜€ONī˜€THEī˜€503ī˜€TOī˜€THEī˜€NETWORKī˜€DEVICEī˜Ž
4.ī˜€0LUGī˜€THEī˜€503ī˜€INTOī˜€Aī˜€ī˜’ī˜€POLEī˜Œī˜€ī˜“ī˜€WIREī˜€GROUNDINGī˜€RECEPTACLEī˜€ī˜ˆWALLī˜€OUTLETī˜‰ī˜Žī˜€
-AKEī˜€SUREī˜€THEī˜€WALLī˜€BRANCHī˜€OUTLETī˜€ISī˜€PROTECTEDī˜€BYī˜€Aī˜€FUSEī˜€ORī˜€CIRCUITī˜€BREAKERī˜€
ANDī˜€DOESī˜€NOTī˜€SERVICEī˜€EQUIPMENTī˜€WITHī˜€LARGEī˜€ELECTRICALī˜€DEMANDSī˜€ī˜ˆEī˜ŽGī˜Žī˜€
REFRIGERATORī˜Œī˜€COPIERī˜Œī˜€ETCxī˜‰ī˜Žī˜€
5.ī˜€0RESSī˜€THEī˜€POWERī˜€SWITCHī˜€TOī˜€TURNī˜€ONī˜€THEī˜€UNITī˜Žī˜€4HEī˜€UNITī˜€WILLī˜€BEEPī˜€TWICEī˜€
ANDī˜€THEī˜€POWERī˜€ONī˜€INDICATORī˜€WILLī˜€ILLUMINATEī˜Ž
6.ī˜€)Fī˜€ANī˜€OVERLOADī˜€ISī˜€DETECTEDī˜Œī˜€ANī˜€AUDIBLEī˜€ALARMī˜€WILLī˜€SOUNDī˜€ANDī˜€THEī˜€UNITī˜€WILLī˜€
EMITī˜€ONEī˜€LONGī˜€BEEPī˜Žī˜€4Oī˜€CORRECTī˜€THISī˜Œī˜€TURNī˜€THEī˜€503ī˜€OFFī˜€ANDī˜€UNPLUGī˜€ATī˜€LEASTī˜€
ONEī˜€PIECEī˜€OFī˜€EQUIPMENTī˜€FROMī˜€THEī˜€BATTERYī˜€POWERī˜€SUPPLIEDī˜€OUTLETSī˜Žī˜€7AITī˜€ī˜‘ī˜ī˜€
SECONDSī˜Žī˜€-AKEī˜€SUREī˜€THEī˜€CIRCUITī˜€BREAKERī˜€ISī˜€DEPRESSEDī˜€ANDī˜€THENī˜€TURNī˜€THEī˜€
503ī˜€ONī˜Ž
7.ī˜€4Oī˜€MAINTAINī˜€OPTIMALī˜€BATTERYī˜€CHARGEī˜Œī˜€LEAVEī˜€THEī˜€503ī˜€PLUGGEDī˜€INTOī˜€ANī˜€!#ī˜€
OUTLETī˜€ATī˜€ALLī˜€TIMESī˜Ž
8.ī˜€4Oī˜€STOREī˜€YOURī˜€503ī˜€FORī˜€ANī˜€EXTENDEDī˜€PERIODī˜Œī˜€COVERī˜€ITī˜€ANDī˜€STOREī˜€WITHī˜€THEī˜€
BATTERYī˜€FULLYī˜€CHARGEDī˜Žī˜€7HILEī˜€INī˜€STORAGEī˜€RECHARGEī˜€THEī˜€BATTERYī˜€EVERYī˜€THREEī˜€
MONTHSī˜€TOī˜€ENSUREī˜€BATTERYī˜€LIFEī˜Ž
AUTOMATIC VOLTAGE REGULATOR
4HEī˜€-"ī˜˜ī˜•ī˜ī˜€STABILIZESī˜€INCONSISTENTī˜€UTILITYī˜€POWERī˜Žī˜€4HEī˜€INCOMINGī˜€UTILITYī˜€
POWERī˜€MAYī˜€BEī˜€DAMAGINGī˜€TOī˜€IMPORTANTī˜€DATAī˜€FILESī˜Œī˜€BUTī˜€WITHī˜€!UTOMATICī˜€
6OLTAGEī˜€2EGULATIONī˜Œī˜€THEī˜€COMPUTERī˜€WILLī˜€NOTī˜€EXPERIENCEī˜€DAMAGINGī˜€VOLTAGEī˜€
LEVELSī˜Žī˜€!Nī˜€!UTOMATICī˜€6OLTAGEī˜€2EGULATORī˜€AUTOMATICALLYī˜€INCREASESī˜€LOWī˜€ORī˜€
DECREASESī˜€HIGHī˜€VOLTAGEī˜€TOī˜€Aī˜€CONSISTENTī˜Œī˜€COMPUTERī˜€SAFEī˜€ī˜‘ī˜‘ī˜Vī˜ī˜‘ī˜’ī˜Vī˜Žī˜€4HEī˜€
UNITī˜‡Sī˜€POWERFULī˜€SEALEDī˜€LEADī˜ACIDī˜€BATTERIESī˜€WILLī˜€PROVIDEī˜€POWERī˜€ONLYī˜€IFī˜€THEī˜€
INCOMINGī˜€VOLTAGEī˜€DROPSī˜€BELOWī˜€ī˜™ī˜Vī˜€ORī˜€INCREASESī˜€ABOVEī˜€ī˜‘ī˜”ī˜V
1.
).3ī˜ī˜ī˜˜ī˜•ī˜“ī˜€2%6ī˜Žī˜€!ī˜€ī˜€ī˜€ī˜‘ī˜ī˜ī˜ī˜˜
2.
BASIC OPERATION
DESCRIPTION
1 - Power Switch
Used as the master on/off switch for equipment connected to the battery
power supplied outlets.
2 - Power On Indicator
This LED is under the power switch. It illuminates when the utility condition
is normal and the UPS outlets are providing power, free of surges and
spikes.
3 - LCD Module Display.
High resolution and intelligent LCD display shows all the UPS information
with icons and messages. For more information please check the
ā€œDefinitions for Illuminated LCD Indicatorsā€ section.
4 - LCD Display Toggle/Selected Switch
The switch can be used to select the LCD display contents including Input
Voltage, Output Voltage and Estimated Run Time. The toggle frequency is
set to one time per second. Holding the switch for more than two seconds
while running on battery will silence the buzzer.
5 - Battery and Surge Protected Outlets
The unit has five battery powered/surge protected outlets for connected
equipment and ensures temporary uninterrupted operation of your
equipment during a power failure
SOFTWARE INSTALLATION GUIDE
Windows Users
You will need to install the included software on to your computer to take
advantage of the UPS computer software control features.
1. Place the CD in your CD drive and wait for the setup wizard to begin. If
the wizard does not begin, go to your CD drive in "My Computer" and open
the folder and double click "Setup.exe".
2. Follow the instructions on your screen and complete the installation.
The default settings offered by the installation wizard are acceptable for
most users and can be changed at any time if necessary.
3. After the setup is complete plug the USB cord from your Panamax UPS
to an available USB port on your computer.
4. You are now ready to begin using the software.
Mac Users
When you first get a new Panamax UPS, you'll need to configure the Mac
UPS function to control your UPS and begin using it. Configuring the
"Energy Saver" UPS Function
1. Plug the USB cord from your Panamax UPS to an available USB port on
your computer.
2. Go to "System Preferences" and open the "Energy Saver" control panel.
3. Select settings for "UPS".
You are now ready to configure the settings for the UPS.
6 - Full-Time Surge Protection Outlets
The unit has four always on surge suppression outlets.
7 - Electrical Wiring Fault Indicator
This LED indicator will illuminate to warn the user that a wiring problem
exists, such as bad ground, missing ground or reversed wiring. If this is
illuminated, user is advised to disconnect all electrical equipment from
the outlet and have an electrician check to ensure the outlet is properly
wired. The unit will not provide surge protection without being plugged
into a grounded and properly wired wall outlet.
8 - Communication Protection Ports
Communication protection ports will protect any standard modem, fax ,
telephone line, broadband network or Ethernet connection.
9 - Circuit Breaker
Located on the back of the UPS, the circuit breaker serves to provide
overload and fault protection.
10 - Serial/USB Ports to PC
The USB and serial port allow communication from the UPS to a
computer. The UPS communicates its status to the software when
connected with a USB port. The serial port is only used with third party
UPS software such as the Microsoft UPS Power Option of Windows
2000, XP, and Vista. For information on configuring and using the serial
port and the Microsoft UPS Power Option or for information regarding
ordering a standard serial cable, please contact technical support at
www.panamax.com. The serial port and USB port cannot be used Note:
to control two computers concurrently. Only one port will function at a
time.
11 Coax/Cable/DSS Surge Protection
The Coax/Cable/DSS surge protection ports will protect any cable
modem, CATV converter, or DSS receiver.
12 Input Power Cord
Connect the unit into an AC outlet.
3.
TO REPLACE THE BATTERY
1. Turn off and unplug all connected equipment.
2. Turn the UPS off and unplug it from the AC power source.
3. Turn the UPS upside down.
4. Remove the retaining screws.
5. Slide the battery compartment cover completely off of the unit.
6. Remove the battery from the compartment.
7. Disconnect the battery wires from the battery.
8. Install the replacement battery by connecting the red wire to the positive (+) pole and black
wire to the negative (-) pole of the battery.
9. Put the battery back into the compartment.
10. Slide back the battery compartment cover and tighten the retaining screw.
11. Recharge the UPS for 8-16 hours to fully charge the battery.
REMINDER: HAZARDOUS WASTE Batteries are consider and must be disposed of properly. Almost any
retailer that sells lead-acid batteries collects used batteries for recycling, as required by most state laws.
DEFINITIONS FOR ILLUMINATED LCD INDICATORS
INPUT voltage meter: This meter measures the AC voltage that the UPS
system is receiving from the utility wall outlet. The UPS is designed, through the
use of automatic voltage regulation, to continuously supply connected equipment
with stable, 110/120 output voltage. In the event of a complete power loss, severe
brownout, or over-voltage, the UPS relies on its internal battery to supply
consistent 110/120 output voltage. The INPUT voltage meter can be used as a
diagnostic tool to identify poor-quality input power.
OUTPUT voltage meter: This meter measures, in real time, the AC voltage that the
UPS system is providing to the computer, such as normal line mode, AVR mode,
and battery back up mode.
Note: The OUTPUT voltage meter shows the status of the battery back up
outlets.
ESTIMATE RUN TIME: This displays the run time estimate of the UPS with the
current battery capacity and load.
NORMAL icon: This icon appears when the UPS is working under normal
conditions.
BATTERY icon: During a severe brownout or blackout, this icon appears and an
alarm sounds (two short beeps followed by a pause) to indicate the UPS is
operating from its internal batteries. Projection televisions should be turned off
immediately. During a prolonged brownout or blackout, the alarm will sound
continuously (and the BATT.CAPACITY meter shows one 20% capacity segment
shaded) to indicate the UPSā€™s batteries are nearly out of power. You should save
files and turn off your equipment immediately.
AVR (Automatic Voltage Regulator) icon: This icon appears whenever your UPS
is automatically correcting too low or too high AC line voltage without using
battery power. This is a normal, automatic operation of your UPS, and no action
is required on your part.
SILENT MODE icon:This icon appears whenever the UPS is in silent mode. The
buzzer does not beep during silent mode until the battery reaches low capacity.
OVER LOAD icon: This icon appears and an alarm sounds to indicate the
battery-supplied outlets are overloaded. To clear the overload, unplug some of
your equipment from the battery-supplied outlets until the icon turns off and the
alarm stops.
FAULT icon: This icon appears if there is a problem with the UPS. Contact
Panamax customer support for further help.
BATT. CAPACITY meter: This meter displays the approximate charge level (in 20%
increments) of the UPSā€™s internal battery. During a blackout or severe brownout,
the UPS switches to battery power, the BATTERY icon appears, and the charge
level decreases.
LOAD CAPACITY meter: This meter displays the approximate output load level
(in 20% increments) of the UPSā€™s battery outlets.
REPLACING THE BATTERY
CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the
battery. Service the battery under the supervision of personnel knowledgeable of batteries
and their precautions.
CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.
CAUTION! The battery may present a risk of electrical shock. Do not dispose of battery in a
fire as it may explode. Follow all local ordinances regarding proper disposal of batteries.
Almost any retailer that sells lead-acid batteries collects used batteries for recycling, as
required by most state laws.
CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to skin and
eyes and may be toxic.
CAUTION! A battery can present a high risk of short circuit current and electrical shock.
Take the following precautions before replacing the battery:
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.
3. Do not lay tools or metal parts on top of battery or any terminals.
4. Wear rubber gloves and boots.
5. Determine if the battery is inadvertently grounded. If grounded, remove the source of ground.
CONTACT WITH A GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK!
The LCD display indicates a variety of UPS operational conditions. All descriptions apply
when the UPS is plugged into an AC outlet and turned on or when the UPS is on battery.


Produktspezifikationen

Marke: Panamax
Kategorie: Nicht kategorisiert
Modell: MB850

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panamax MB850 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Panamax

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĆ¼r -Kategorien-