PAC NDK735MG Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für PAC NDK735MG (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
CUSTOMER HELP LINE
USA 800-323-4329
iNDK735
NDK735MG Mounting Kit
NISSAN
2014-15 ROGUE
VEHICLE APPLICATIONS
©2015 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 8/15 PRINT Ver. 08/15
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
For information about other American International automotive
accessories visit our website at:
http://www.aius.net
1. Using a soft tool unsnap and remove the panel located on the far right passenger
dash to the right of the air vent.
2. Remove (1) Phillip screw from passenger side air vent, unsnap and remove
3. Starting from the passenger side using a soft tool unsnap and remove the center dash
trim located above the glove box to the radio. You will need to unhook once at radio.
4. Using a soft tool unsnap and remove the climate control panel.
5. Using a soft tool unsnap and remove the panel located on the driver side of the
radio(some models may include a push to start button)
6. From the OEM radio brackets remove (4) Phillips screws. Remove Radio.
Unplug all harnesses and antenna connections.
DASH DISASSEMBLY
1 2
KIT ASSEMBLY INSTRUCTIONS
1. Insert pocket into lower section of the NDK735MG brackets
2. Install brackets to rear of main frame using the (6) screws provided.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
4. Using the main frame of the NDK735MG as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
NOTE: Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio. Suggested.
Single ISO Mount Applications
Double DIN Mount Applications
Fig B
See Fig B for bracket tab removal.
1. Install brackets to rear of main frame using the (6) screws provided.
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to
sides of radio using screws provided with radio when possible, or screws supplied
with kit.
3. Using the main frame of the NDK735MG as a guide, slide radio forward or back-
ward for desired look and then tighten screws to the radio.
NOTE: Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio. Suggested.
Fig A
Remove shaded tabs
on left and right sides
of the brackets


Produktspezifikationen

Marke: PAC
Kategorie: Nicht kategorisiert
Modell: NDK735MG

Brauchst du Hilfe?

Wenn Sie Hilfe mit PAC NDK735MG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert PAC

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-