Ozito PXPPHTK-418 Bedienungsanleitung

Ozito Heckenschere PXPPHTK-418

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXPPHTK-418 (18 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/18
SPECIFICATIONS
Input: 18V
Bar Length: 200mm
Cutting Length Max.: 170mm
Chain Speed: 3.76m/s
Oil Tank Capacity: 125ml
Length: 1.83 - 2.77m
Weight: 3.9kg
STANDARD EQUIPMENT
Pole
CORDLESS
POLE PRUNER
ORIGINAL INSTRUCTIONS
ozito.com.au
Guide Bar Cover
Pruner Head
Chain
Guide Bar
Rear Handle
Shoulder Strap
Auxiliary Handle
PXCPPS-018
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0221
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: guide bar, chain
and included accessories.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. ASSEMBLY
1. Chain
2. Guide Bar
3. Oil Cap
4. Side Cover
5. Pivoting Pruner Head Release
6. Telescopic Tube Lock
7. Main Tube
8. Auxiliary Handle
9. Shoulder Strap Holder
10. Assembly Nut
11. Pivoting Handle Release
12. Rear Handle
13. Chain Cover Lock
14. Chain Tension Adjustment Dial
15. Switch Lock
16. Auxiliary Handle Lever
17. Trigger Switch
18. Battery Seating
19. Mounting Attachment Lever
CORDLESS POLE PRUNER
1
2
3
4
5
6
7
8
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
15
16
10
11
12
13 14 9
17 18 19
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito Power X Change Range.
WARNING!: ENSURE THE TOOL IS OFF & THE
BATTERY REMOVED BEFORE PERFORMING ANY OF
THE FOLLOWING OPERATIONS.
Fitting Rear Handle
1. Push the rear handle fully
onto tube aligning the
internal prongs.
2. Screw tight with
the assembly nut.
Fitting Auxiliary Handle
1. Place the Auxiliary Handle onto
the mounting attachment.
2. Pass the bolt through the auxiliary handle and screw the lever to the end
of the bolt.
3. Select the most comfortable
position and close the lever
to lock the auxiliary handle in
position.
2. TENSIONING THE CHAIN
Note: The Lock Button will “CLICK” back to the left (original position) when
the pruner head is correctly secured in place.
3 - 4mm gap is
the ideal tension
Fitting Pruner Head
1. Align the pruner head and
the motor head so the
arrows on both coincide.
2. (a) Press the pruner head
against the motor head.
This will cause the lock
button to be pushed to the
right.
(b) Turn the pruner head
clockwise. The pruner head
will lock onto the motor
head and is then secured
in place.
Lock Button
a
b
Note: Only tighten the chain cover locking knob securely once the chain
tension has been adjusted (see: Tensioning the chain.)
WARNING!: THE CHAIN HAS SHARP EDGES. FOR
YOUR OWN SAFETY, PLEASE WEAR WORK GLOVES.
WARNING!: IF THE CHAIN IS INSTALLED BACKWARDS
(CHAIN CUTTERS ARE FACING IN THE OPPOSITE
DIRECTION OF ROTATION) THE POLE PRUNER WILL
VIBRATE EXCESSIVELY AND NOT CUT.
Fitting Guide Bar & Chain
1. Loosen the
chain cover
lock and
remove the
side cover.
2. Place the chain in the groove
of the guide bar as shown.
Refer to the image printed on
the guide bar that indicates
the direction that the chain
should face.
Sprocket
3. Place onto the mount,
ensuring that the chain sits
around the chain sprocket.
4 Re-mount and nger-tighten
the side cover with the chain
cover lock.
1. Loosen the chain
cover lock. Do not
remove the side
cover.
WARNING!: IF YOU TRY TO ROTATE THE CHAIN
TENSIONING ADJUSTMENT DIAL WHILST THE CHAIN
COVER LOCK IS TIGHT, IT WILL RESULT IN THE CHAIN NOT
LOOSENING AND POSSIBLE DAMAGE TO THE MECHANISM.
2. Adjust the chain tension with
the chain tensioning adjustment
dial. Turning the dial CLOCKWISE
increases the chain tension,
turning it COUNTER-CLOCKWISE
decreases the chain tension.
For the correct chain tension, rmly
pull up on the chain at the middle
of the top of the exposed guide bar.
When the chain is pulled up to its
highest point, the bottom tip of the
links should only just stay in the track
[middle of the guide bar]
WARNING!: THE CHAIN HAS SHARP EDGES. FOR
YOUR OWN SAFETY, PLEASE WEAR WORK GLOVES.
3. After the chain has been
accurately tensioned, lock the
guide bar in place with the
chain cover locking knob.
Note: Proper tension of the chain is extremely important and must be
checked before starting, as well as during any cutting operation.
Taking the time to make adjustments to the chain will result in
improved cutting performance and prolonged chain life.

Produktspezifikationen

Marke: Ozito
Kategorie: Heckenschere
Modell: PXPPHTK-418

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXPPHTK-418 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Heckenschere Ozito

Ozito

Ozito PXCGSS-018 Bedienungsanleitung

11 Oktober 2024
Ozito

Ozito HTL-072 Bedienungsanleitung

26 September 2024
Ozito

Ozito PXPPK-2520 Bedienungsanleitung

25 August 2024
Ozito

Ozito PXPHTK-2545 Bedienungsanleitung

25 August 2024
Ozito

Ozito PXCHTS-018U Bedienungsanleitung

14 August 2024
Ozito

Ozito PXCPHTS-018U Bedienungsanleitung

12 August 2024
Ozito

Ozito PXCHT-6502U Bedienungsanleitung

8 August 2024
Ozito

Ozito EPHT-501 Bedienungsanleitung

6 August 2024
Ozito

Ozito HTE-550U Bedienungsanleitung

6 August 2024
Ozito

Ozito PXGTHTK-258 Bedienungsanleitung

1 August 2024

Bedienungsanleitung Heckenschere

Neueste Bedienungsanleitung fĂźr -Kategorien-

Kibani

Kibani WPET1206 - XXL Bedienungsanleitung

15 Oktober 2024
Texas

Texas HTG360Li Bedienungsanleitung

8 Oktober 2024
Makita

Makita UH5520 Bedienungsanleitung

4 Oktober 2024
Stihl

Stihl HSE 52 Bedienungsanleitung

4 Oktober 2024
Hitachi

Hitachi FCH 48Y Bedienungsanleitung

3 Oktober 2024
Black And Decker

Black And Decker GT200 Bedienungsanleitung

1 Oktober 2024
Ryobi

Ryobi ONE+ OGS1820 Bedienungsanleitung

30 September 2024
Einhell

Einhell BG-EH 3551 T Bedienungsanleitung

30 September 2024
Black And Decker

Black And Decker GTC1850L Bedienungsanleitung

29 September 2024
Makita

Makita UN5400 Bedienungsanleitung

28 September 2024