Ozito PXPHTK-2545 Bedienungsanleitung

Ozito Heckenschere PXPHTK-2545

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXPHTK-2545 (12 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
CORDLESS POLE
HEDGE TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Cutting Speed: 1,400 SPM
Cutting Capacity: Ø16mm max.
Cutting Length: 410mm max.
Blade Length: 450mm
Extension Pole: 830mm
Length Min/Max.: 2.07/2.90mm
Weight: 3.50kg
PXPHTS-1845
STANDARD EQUIPMENT
Trimmer Head
ozito.com.au
Extension Tube
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, blades,
blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
Blade Cover
Rear Handle Tube
Shoulder Strap
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The pole hedge trimmer can be used either with or without the
extension tube.
Fitting the Tubes
WARNING! ENSURE THE MACHINE IS SWITCHED OFF
AND BATTERY IS DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
1
9
2
3
4
14
6
7
8
1. Blade
2. Trimmer Head
3. Pivoting Head Button
4. Lock Nut
5. Extension Tube
6. Top Handle
7. Shoulder Strap Retainer
8. Sure Grip Handle
9. Rear Handle Release x 2
10. Safety Switch
11. Battery Seating
12. On/Off Trigger
13. Blade Cover
14. Shoulder Strap
CORDLESS POLE HEDGE TRIMMER
WARNING! WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES. DO
NOT PLACE YOUR HAND OR FINGERS BETWEEN BLADES
OR IN ANY POSITION WHERE THEY COULD GET PINCHED
OR CUT. NEVER TOUCH BLADES OR SERVICE THE UNIT
WITH THE BATTERY INSTALLED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
• Assembly without Extension Tube
1. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the motor head into the tube of the rear
handle, aligning the Tab with the Recess as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the
lock nut to the hread
and screw tight. To
dismantle, proceed in
reverse order.
Note: The locking and unlocking directions
are indicated on the lock nut.
4
10
11 12
13
5
7
2. PREPARATION
WARNING! NEVER START THE POLE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
• Assembly with Extension Tube
1. Push the tube of the motor head into the extension tube, aligning the
Tab with the Recess of the extension tube as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the lock
nut to the extension tube
thread and screw tight.
3. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the rear handle onto the tube of the
extension tube, aligning the Tab with the Recess as you do so. Push
both halves together until it will not go any futher.
4. To secure the two parts together, screw tight with the lock nut.
WARNING! DO NOT OPERATE THE POLE HEDGE
TRIMMER WITH MORE THAN ONE EXTENSION TUBE
FITTED, THIS IS EXTREMELY DANGEROUS.
Adjusting the Rear Handle
Press and hold the two rear handle releases, one each side and turn the
handle 90 to the left or 90 to the right. Release to lock in position.
Pivoting the Trimmer Head
The head can be tilted to 7 different angles for ease of cutting in
different conditions.
1. Grip the motor housing of
the trimmer, press and hold
the pivoting head button.
WARNING! DO NOT HOLD THE BLADE IN AN ATTEMPT
TO ADJUST THE BLADE ANGLE. DOING SO MAY RESULT
IN POSSIBLE PERSONAL INJURY.
2. Tilt the head to any of
the 7 preset angles,
then release the
button to lock the
head in the selected
position.
The blade cover protects
the blade when not in
use. Simply slide it off
the blade before use.
Once nished operating,
place the cover back
over the blade.
Blade Cover

Produktspezifikationen

Marke: Ozito
Kategorie: Heckenschere
Modell: PXPHTK-2545

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXPHTK-2545 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Heckenschere Ozito

Ozito

Ozito PXCGSS-018 Bedienungsanleitung

11 Oktober 2024
Ozito

Ozito HTL-072 Bedienungsanleitung

26 September 2024
Ozito

Ozito PXPPK-2520 Bedienungsanleitung

25 August 2024
Ozito

Ozito PXPHTK-2545 Bedienungsanleitung

25 August 2024
Ozito

Ozito PXCHTS-018U Bedienungsanleitung

14 August 2024
Ozito

Ozito PXCPHTS-018U Bedienungsanleitung

12 August 2024
Ozito

Ozito PXCHT-6502U Bedienungsanleitung

8 August 2024
Ozito

Ozito EPHT-501 Bedienungsanleitung

6 August 2024
Ozito

Ozito HTE-550U Bedienungsanleitung

6 August 2024
Ozito

Ozito PXGTHTK-258 Bedienungsanleitung

1 August 2024

Bedienungsanleitung Heckenschere

Neueste Bedienungsanleitung für -Kategorien-

Kibani

Kibani WPET1206 - XXL Bedienungsanleitung

15 Oktober 2024
Texas

Texas HTG360Li Bedienungsanleitung

8 Oktober 2024
Makita

Makita UH5520 Bedienungsanleitung

4 Oktober 2024
Stihl

Stihl HSE 52 Bedienungsanleitung

4 Oktober 2024
Hitachi

Hitachi FCH 48Y Bedienungsanleitung

3 Oktober 2024
Black And Decker

Black And Decker GT200 Bedienungsanleitung

1 Oktober 2024
Ryobi

Ryobi ONE+ OGS1820 Bedienungsanleitung

30 September 2024
Einhell

Einhell BG-EH 3551 T Bedienungsanleitung

30 September 2024
Black And Decker

Black And Decker GTC1850L Bedienungsanleitung

29 September 2024
Makita

Makita UN5400 Bedienungsanleitung

28 September 2024