Ozito PXCGSS-018 Bedienungsanleitung

Ozito Heggenschaar PXCGSS-018

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXCGSS-018 (16 Seiten) in der Kategorie Heggenschaar. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
CORDLESS GRASS
TRIMMER & SHEAR
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
No Load Speed: 1,200/min
Hedge Trimmer: 200mm Blade
Grass Shear: 100mm Blade
Max. Cutting Cap.: 8mm
Weight: 1.0kg
PXCGSS-018
STANDARD EQUIPMENT
Cordless Grass Trimmer /
Shear
Hedge Trimmer Blade
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
0318
Grass Shear Blade
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example blades, blade
cover.
Blade Covers
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. CHANGING BLADES
SETUP & PREPARATION
1. Slide the back of the
blade base into the
recess in the housing.
Inserting the Blade Base
Remove the Blade Base
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
WEAR GLOVES, BLADES ARE SHARP.
ACCESSORIES
1 2 3 4 5 6
7 8
1. Base Release Button
2. Removable Base
3. Safety Switch
4. On/Off Trigger
5. Sure Grip Handle
6. Battery Seating
CORDLESS TRIMMER/SHEAR
7. Hedge Trimmer Blade
8. Grass Shear Blade
9. Blade Covers
WARNING!: DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
2. Push the front of the
blade base into the
housing until it clicks
into place.
1. Press and hold the base
release button.
2. Remove the base by
lifting from the front and
then sliding out.
9Note: Ensure the base is supported by hand when the release button is
pressed to prevent it falling unexpectedly.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from Ozito
Power X Change Range.
3. CONTROLS2. INSERTING &
REMOVING THE BATTERY
OPERATION
1. Align the ribs of the battery with
the recess at the back of the
handle.
1. Press and hold the safety switch
and then squeeze the on/off
trigger to start.
1. Press and hold the battery
release tab and then slide out.
2. Slide the battery in so
that it clicks into place.
2. To stop operation,
release the on/off
trigger.
Inserting a Battery
Removing a Battery
Switching On and Off
WARNING! CLEAR THE AREA TO BE CUT BEFORE
EACH USE. REMOVE ALL OBJECTS, SUCH AS CORDS,
LIGHTS, WIRE, OR STRING WHICH CAN BECOME
ENTANGLED IN THE CUTTING BLADE AND CREATE A
RISK OF SERIOUS PERSONAL INJURY.


Produktspezifikationen

Marke: Ozito
Kategorie: Heggenschaar
Modell: PXCGSS-018

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXCGSS-018 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Heggenschaar Ozito

Bedienungsanleitung Heggenschaar

Neueste Bedienungsanleitung für -Kategorien-