Ozito PXCPHTA-400 Bedienungsanleitung
Ozito
Heckenschere
PXCPHTA-400
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Ozito PXCPHTA-400 (8 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war fĂźr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
CORDLESS POLE
HEDGE TRIMMER HEAD
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
Cutting Length: 400mm
Max. Cutting Capacity: 12mm
No Load Speed: 1,700/min
Weight: 1.57kg
PXCPHTA-400
WHATâS IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofîce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneîts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
0617
WARNING
The following actions will result in the warranty being
void.
⢠If the tool has been operated on a supply voltage other
than that speciîed on the tool.
⢠If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the instruction manual.
⢠If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example blades, blade
cover.
Blade Cover
Hedge Trimmer Head
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
POLE HEDGE TRIMMER HEAD
1. Trimmer Head
2. Blade
1 2
CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Note: The Lock Button will âCLICKâ back to the left (original position) when
the trimmer head is correctly secured in place.
CAUTION: THE BLADE HAS SHARP EDGES. FOR YOUR OWN
SAFETY, PLEASE WEAR WORK GLOVES.
Fitting Trimmer Head
1. Align the Trimmer head
and the motor head so the
arrows on both coincide.
2. (a) Press the trimmer head
against the motor head.
This will cause the lock
button to be pushed to the
right.
(b) Turn the trimmer head
clockwise. The trimmer
head will lock onto the
motor head and is then
secured in place.
Lock Button
a
b
Removing Trimmer Head
Motor Head
a
b
1. (a) Pull and hold the Lock
Button to the right.
(b) Turn the Trimmer
Head anti-clockwise so
the arrows on the Motor
Head and the Trimmer
Head coincide, allowing
the Trimmer Head to be
removed.
2. PREPARATION
Adjusting the Rear Handle
Adjusting the telescope length
1. To unlock the telescopic tube lock, twist it in a
clockwise direction while pointing the trimmer
blade away from the user.
2. Pull out the telescopic tubes to suit the required working height.
1. Press the two pivoting
handle releases, one
each side and adjust
the angle of the handle
up or down to any of 4
positions.
Note: The locking and unlocking
directions are indicated on
the locking collar.
3. To lock in the desired position, twist the telescopic tube lock in a counter-
clockwise direction.
Adjusting the Additional Handle
a
b
a
b
1. (a) Open the handle lever and
set the required (b) tilt of the
additional handle, close to lock
into position.
2. (a) Open the mounting bracket
lever and (b) slide the additional
handle into the required position,
close to lock into position.
2. Wear the shoulder strap
so that it lies over the left
shoulder.
1. Fasten to the shoulder strap
holder on the main tube.
Attaching the Shoulder Strap
Pivoting the Trimmer Head
1. Press the two pivoting
head releases, one each
side and adjust the angle
of the trimmer head
up or down to any of 7
positions.
Produktspezifikationen
Marke: | Ozito |
Kategorie: | Heckenschere |
Modell: | PXCPHTA-400 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito PXCPHTA-400 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heckenschere Ozito
11 Oktober 2024
26 September 2024
25 August 2024
25 August 2024
14 August 2024
12 August 2024
8 August 2024
6 August 2024
6 August 2024
1 August 2024
Bedienungsanleitung Heckenschere
- Heckenschere Hanseatic
- Heckenschere Cotech
- Heckenschere Makita
- Heckenschere Bosch
- Heckenschere Parkside
- Heckenschere Vonroc
- Heckenschere Black And Decker
- Heckenschere Cocraft
- Heckenschere FERM
- Heckenschere Ryobi
- Heckenschere Skil
- Heckenschere Topcraft
- Heckenschere Trotec
- Heckenschere DeWalt
- Heckenschere Einhell
- Heckenschere Worx
- Heckenschere Hikoki
- Heckenschere Hitachi
- Heckenschere Hyundai
- Heckenschere Fuxtec
- Heckenschere Kress
- Heckenschere Metabo
- Heckenschere Kärcher
- Heckenschere Atika
- Heckenschere GĂźde
- Heckenschere Scheppach
- Heckenschere Levita
- Heckenschere Meec Tools
- Heckenschere Fieldmann
- Heckenschere Remington
- Heckenschere Husqvarna
- Heckenschere Stihl
- Heckenschere Dedra
- Heckenschere Pattfield
- Heckenschere Honda
- Heckenschere Cramer
- Heckenschere Florabest
- Heckenschere Grouw
- Heckenschere Hecht
- Heckenschere Stiga
- Heckenschere Greenworks
- Heckenschere Robust
- Heckenschere Zipper
- Heckenschere Baumr-AG
- Heckenschere Brandson
- Heckenschere Batavia
- Heckenschere Dolmar
- Heckenschere Bavaria
- Heckenschere Milwaukee
- Heckenschere AL-KO
- Heckenschere EGO
- Heckenschere Gardena
- Heckenschere CMI
- Heckenschere Powerpeak
- Heckenschere Verto
- Heckenschere Wolf Garten
- Heckenschere Craftsman
- Heckenschere Defort
- Heckenschere Powerplus
- Heckenschere Kingcraft
- Heckenschere Echo
- Heckenschere Toledo
- Heckenschere Martha Stewart
- Heckenschere McCulloch
- Heckenschere Sun Joe
- Heckenschere Solo
- Heckenschere Texas
- Heckenschere VARO
- Heckenschere Spear & Jackson
- Heckenschere Efco
- Heckenschere Eurogarden
- Heckenschere Ferrex
- Heckenschere Flymo
- Heckenschere Gamma
- Heckenschere Garden Feelings
- Heckenschere Garden Groom
- Heckenschere Gardenline
- Heckenschere Gartenmeister
- Heckenschere Grizzly
- Heckenschere Hoberg
- Heckenschere Homelite
- Heckenschere HURRICANE
- Heckenschere Kaaz
- Heckenschere Kibani
- Heckenschere Lux Tools
- Heckenschere Mac Allister
- Heckenschere McGregor
- Heckenschere Mr Gardener
- Heckenschere Qualcast
- Heckenschere Shindaiwa
- Heckenschere Sterwins
- Heckenschere Tanaka
- Heckenschere Tel Sell
- Heckenschere Yardforce
- Heckenschere Powerworks
- Heckenschere Sovereign
- Heckenschere Challenge
- Heckenschere RIDA
- Heckenschere Gtech
- Heckenschere Palmera
- Heckenschere MacAllister
- Heckenschere Deltafox
- Heckenschere Jonsered
- Heckenschere G-Technology
- Heckenschere Gute Wahl
- Heckenschere Budget
- Heckenschere Anova
- Heckenschere Yellow Garden Line
- Heckenschere LawnMaster
- Heckenschere Ergotools Pattfield
- Heckenschere Bestgreen
- Heckenschere Maruyama
- Heckenschere Black Decker
- Heckenschere Maxbear
Neueste Bedienungsanleitung fĂźr -Kategorien-
15 Oktober 2024
8 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
1 Oktober 2024
30 September 2024
30 September 2024
29 September 2024
28 September 2024