Ozito PFFP-65E Bedienungsanleitung

Ozito pomp PFFP-65E

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Ozito PFFP-65E (8 Seiten) in der Kategorie pomp. Dieser Bedienungsanleitung war fĆ¼r 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
1
INSTRUCTION MANUAL
PFFP-65E
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
1 YEAR WARRANTY
Your product is guaranteed for a period of 12 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be repaired in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: o-rings, bearing, seals, gaskets and adaptors.
WARNING
The following actions will result in the warranty being void.
ā€¢ If the tool has been operated on a supply voltage other
than that speciļ¬ed on the tool.
ā€¢ If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
ā€¢ Failure to perform maintenance as set out within the
instruction manual.
ā€¢ If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofļ¬ce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneļ¬ts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
PETROL
FIRE FIGHTING
PUMP
208CC 4 STROKE
SPECIFICATIONS
Engine: 4.8kW (6.5HP)
Engine Type: 4 Stroke, air cooled
Fuel Type: Unleaded petrol
Fuel Tank Capacity: 3.3L
Engine Capacity: 208cc
Max. Flow Rate: 11,500l/h
Max. Head: 70m
Max. Lift: 7m
Suction Inlet: 40mm (1Ā½ā€)
Discharge Outlet: 2 x 25.4mm (1ā€), 1 x 40mm (1Ā½ā€)
Weight: 29kg
5M Suction Hose
Fasteners & Adaptors
ozito.com.au
Spark Plug Wrench &
Filter
Petrol Pump
0618
1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. CONNECTING THE INLET
WARNING! ENSURE THE ENGINE IS SHUT OFF BEFORE
PERFORMING ANY OF THE FOLLOWING ASSEMBLY.
Connecting the Suction Inlet
Removing the Protection Covers
1.ī˜ƒ ī˜ƒPlaceī˜ƒtheī˜ƒīšælterī˜ƒ
assembly into the
intake end of the
5m suction hose
and secure with a
hose clamp tightly.
2. Insert a hose
adaptor and an
o-ring into one of
the collars and
fasten to the outlet
side of the 5m
suction hose using
a hose clamp.
3. Screw the hose adaptor and
collar tightly onto the pumps
suction inlet in a clockwise
direction to secure in place.
Note: Teī›€onī˜ƒtapeī˜ƒ(notī˜ƒsupplied)ī˜ƒis
recommended on threads
to ensure a water tight seal
and prevent any leakage.
Theī˜ƒinletī˜ƒallowsī˜ƒforī˜ƒaī˜ƒ40mmī˜ƒ(1Ā½ā€)ī˜ƒsupplyī˜ƒlineī˜ƒtoī˜ƒbeī˜ƒconnectedī˜ƒ
and is capable of a maximum suction height of 7m.
Theī˜ƒpumpī˜ƒinletī˜ƒandī˜ƒoutletsī˜ƒhaveī˜ƒbeenī˜ƒīšættedī˜ƒwithī˜ƒaī˜ƒprotectionī˜ƒ
cover for transportation. These will need to be removed before
connecting any pipes.
CAUTION: AVOID POSITIONING THE INLET PIPE HIGHER
THAN THE PUMP, AS THIS WOULD DELAY THE ESCAPE
OF AIR BUBBLES FROM THE INLET PIPE.
CAUTION: THE INPUT HOSE OR PIPE SHOULD BE LOW
ENOUGH IN THE WATER TO ENSURE THAT IF THE
WATER LEVEL FALLS, THE PUMP WILL NOT RUN DRY.
ENSURE THAT THIS IS CHECKED WHEN IN OPERATION.
16. Spark Plug Wrench
17. Filter
18. 5m Suction Hose
19. Collars
20. O-rings
21. Outlet Caps
22. Hose Adaptors
23. Hose Clamps
KNOW YOUR PRODUCT SETUP & PREPARATION
PETROL FIRE FIGHTING WATER PUMP
ACCESSORIES
1
11
10
6
2
12
15
7
3
13
8
4
14
16 17 18 19 20 21 22 23
9
5
1. Exhaust
2. Air Filter
3. Choke Lever
4. Fuel Lever
5. Recoil Starter
6. Fuel Cap
7. Fuel Tank
8. Throttle Lever
9. Motor Housing
10. Priming Cap
11. Discharge Outlet
12. Pump Housing
13. Suction Inlet
14. Drain Screw
15. Oil Fill Plug
3.
INSTALLATION
Connecting the Discharge Outlet
1. Insert a hose
adaptor and an
o-ring into one of
the collars.
2. Screw the hose adaptor and
collar tightly onto one of the
pump outlets in a clockwise
direction to secure in place.
Note: Teī›€onī˜ƒtapeī˜ƒ(notī˜ƒsupplied)ī˜ƒ
is recommended on
threads to ensure a water
tight seal and prevent any
leakage.
3.ī˜ƒ ī˜ƒRepeatī˜ƒthisī˜ƒprocessī˜ƒtoī˜ƒīšætī˜ƒmultipleī˜ƒoutlets.
Ensureī˜ƒunusedī˜ƒoutletsī˜ƒareī˜ƒīšættedī˜ƒwithī˜ƒtheī˜ƒsuppliedī˜ƒoutletī˜ƒcapsī˜ƒ
to stop water from expelling out of the discharge outlets.
Theī˜ƒoutletī˜ƒallowsī˜ƒforī˜ƒaī˜ƒ25.4mmī˜ƒ(1ā€)ī˜ƒandī˜ƒ40mmī˜ƒ(1Ā½ā€)ī˜ƒpipeī˜ƒtoī˜ƒbeī˜ƒ
connected and is capable of a maximum head of 70m.
Theī˜ƒpumpī˜ƒhasī˜ƒ3ī˜ƒoutletsī˜ƒ(2xī˜ƒ25.4mmī˜ƒandī˜ƒ1xī˜ƒ40mm),ī˜ƒ
which allows for multiple outlets to be used to pump water
simultaneously,ī˜ƒhoweverī˜ƒthisī˜ƒwillī˜ƒresultī˜ƒinī˜ƒlowerī˜ƒpressureī˜ƒandī˜ƒ
ī›€owī˜ƒrate.
2. CONNECTING THE OUTLET
NOTE: TO USE THE PUMP IN PERMANENT INSTALLATIONS
WITH RIGID PIPES, INSTALL A NON-RETURN VALVE TO AVOID
THE FLUID BEING RE-CIRCULATED ONCE THE PUMP HAS
STOPPED.
CAUTION: ALL CONNECTIONS MUST BE AIR TIGHT,
FAILURE TO DO SO MAY RESULT IN AN AIR LEAK
WHICH CAN PREVENT THE PUMP FROM PRIMING.
1. Ensure the pump is mounted to a rigid base or ground.
70m
7m
MAXIMUM DELIVERY HEIGHT
WATER LEVEL
CAUTION: ALWAYS CARRY OR LIFT THE PUMP BY THE
FRAME TO AVOID DAMAGING THE UNIT.
CAUTION: THIS PRODUCT IS INTENDED FOR PUMPING
WATER IN A HOME DOMESTIC APPLICATION. DO NOT
USE IT FOR CORROSIVE, ABRASIVE, EXPLOSIVE OR
DANGEROUS LIQUIDS.
2. Ensure the distance from the surface of the water to the
pump inlet does not exceed 7m.
3. Ensure the distance from the pump to the highest point that
you wish to deliver the water does not exceed 70 metres.
Before starting, perform a few simple checks:
WARNING! ENSURE THE OUTLET FOR THIS PUMP, INCLUDING
ANY HOSES OR PIPES ARE NOT RESTRICTED OR OBSTRUCTED
IN ANY WAY. TAPS, VALVES AND ANY TYPE OF TRIGGER
NOZZLE MUST NEVER BE USED WITH THIS PUMP. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PUMP FAILURE
OR SERIOUS INJURY.


Produktspezifikationen

Marke: Ozito
Kategorie: pomp
Modell: PFFP-65E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PFFP-65E benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung pomp Ozito

Bedienungsanleitung pomp

Neueste Bedienungsanleitung fĆ¼r -Kategorien-