Ozito ODMM-300 Bedienungsanleitung
Ozito
Laserwasserpass
ODMM-300
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito ODMM-300 (8 Seiten) in der Kategorie Laserwasserpass. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
A
V~
300 300
20
200 200
2
200m
Ω
OF F
200
200µ
20µ
2k
20k
200k 200m
20m
2m
2M
10A
VmA
Ω
V
10A
CO M
A
V~
300 300
20
200 200
2
200m
Ω
OFF
200
200µ
20µ
2k
20k
200k 200m
20m
2m
2M
10A
VmA
Ω
V
10A
COM
DIGITAL
MULTIMETER
300V 10A
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 9V DC Battery
Voltage: 200 - 300V (AC)
0.2 - 300V (DC)
Current: 20µ - 10A (DC)
Resistance: 200 - 2MΩ
Diode Check: 2.2V (Open Circuit Voltage)
Continuity Check: <20Ω
Operating Temperature: 0 to 40°C, <75%RH
Weight: 0.23kg
ODMM-300
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase. If a product is defective it will be replaced
in accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: valve adapters and accessories.
WARNING! The following actions will result in the warranty
being void.
• If the tool has been operated on a supply voltage other than that
specified on the tool.
• If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction
manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE
RELATING TO THE WARRANTY POLICY OR
PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ozito.com.au
Digital Multimeter
Test Lead Set & 9V Battery
1019
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as
in the presence of ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the o-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger
on the switch or energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
dierent from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
The benefits provided under this warranty are in addition to other
rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You
are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount
to a major failure.
Generally you will be responsible for all costs associated with a claim
under this warranty, however, where you have suffered any additional
direct loss as a result of a defective product you may be able to claim
such expenses by contacting our customer service helpline above.
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
A
V~
300 300
20
200 200
2
200m
Ω
OFF
200
200µ
20µ
2k
20k
200k 200m
20m
2m
2M
10A
VmA
Ω
V
10A
COM
Installing Batteries
The multimeter requires a 9V DC battery to operate.
1. Unscrew the two screws
on the back of the unit
with a PH00 Phillips head
screwdriver.
2. Remove the back cover of the unit and attach a 9V battery to the
battery ap.
3. Tuck the battery into the compartment, replace the back cover of
the unit and the 2 screws.
Low Battery Indicator
When the low battery icon
appears, the batteries are at low
charge and need to be replaced.
WARNING! TO AVOID FALSE READINGS, WHICH
COULD LEAD TO ELECTRIC SHOCK OR PERSONAL
INJURY, REPLACE THE BATTERY AS SOON AS THE
LOW BATTERY ICON APPEARS.
1. ½ Digit
2. 3½ Digit Display
3. Voltage (AC) Range
4. Mode Dial
5. Current (DC) Range
6. Diode/Continuity Check
7. Red Test Probe
8. Black Test Probe
9. ‘10A’ Port
10. ‘VmAΩ’ Port
11. ‘COM’ Port
12. Black Test Lead
13. Red Test Lead
14. Resistance Range
15. Voltage (DC) Range
16. Low Battery Icon
17. Negative ‘-’ Reading
18. High Voltage Icon
DIGITAL MULTIMETER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
V~
300 300
20
200 200
OFF
20µ
V
1
91011
1213
2
7
4
3
5
6
18
8
16
17
15
14
WARNING! ENSURE THE UNIT IS IN THE OFF
POSITION AND THE TEST LEADS HAVE BEEN
REMOVED BEFORE OPENING THE BACK COVER.
Connecting The Test Leads
Remove the caps on the end of the test leads before plugging them
into the unit.
The black test lead should be
plugged into the black ‘COM’
port and is the reference ground
that the meter calculates
readings o.
The unit has 2 fuses rated for
dierent current loads protecting
each respective port. For most
applications, the red test lead
should be plugged into the red
‘VmAΩ’ port.
However when measuring
circuits with a current close to or
more than 200mA, the red test
lead should be plugged into the
blue ‘10A’ port.
Note: The red and black test leads are identical and can be
interchanged. It will just be more dicult to determine current ow
direction and which is the ‘common’ probe during use.
Understanding The Display
The multimeter has a 3½ digit display, which means that the rst 3
digits are full digits and can display any number between 0 and 9.
The 4th digit from the right is the ‘½’ digit and has 2 states, ‘0’ or ‘1’.
In practice, this means that when the mode dial is set to measure
in the 2V range the maximum value it can display is 1.999, or in the
200kΩ range, the maximum value is 199.9kΩ.
This also means that in the 300 VDC and 300 VAC mode, the display
will only show measurements between 1 and 300V. A measurement
of 0.9V or less will show up as a ‘000’ onscreen.
Finding The Measuring Range
The multimeter needs to be set to the lowest possible range in order
to reduce the amount of inaccuracy in the readings. If you are unsure
of the range to start o with, it is best to set the mode dial to the
highest range setting, take a measurement to obtain a ballpark gure,
and then use that gure to adjust the mode dial accordingly.
For example, if you are unsure of the voltage you are about to
measure, set the mode dial to 300 VDC. If the measurement shows
up as a ‘000’ onscreen, set the mode dial to ‘200 VDC’ and repeat
the measurement. If the display then shows a value such as ‘04.2’
you can adjust the mode dial to the 20 VDC setting and redo the
measurement. You could then obtain a more accurate reading such
as ‘4.26’ VDC.
If the display had shown ‘00.2’ in the 200 VDC setting, then you
would adjust the mode dial to the 2 VDC setting and perhaps even
the 200m VDC setting for increased accuracy.
A measurement with the mode dial in a range setting that is too low
will result in ‘OL’ being displayed onscreen.
2. CONTROLS
OPERATION
A
200m
Ω
200
2k
20k
200k 200m
20m
2m
2M
10A
VmA
Ω10A
COM
200
2k
VmA
Ω10A
OM
VmA
Ω
10A
OM
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Laserwasserpass |
| Modell: | ODMM-300 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito ODMM-300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laserwasserpass Ozito
27 August 2024
27 August 2024
6 August 2024
6 August 2024
5 August 2024
2 August 2024
28 Juli 2024
28 Juli 2024
7 Juli 2024
Bedienungsanleitung Laserwasserpass
- Laserwasserpass Makita
- Laserwasserpass Bosch
- Laserwasserpass Laserliner
- Laserwasserpass Skil
- Laserwasserpass Hilti
- Laserwasserpass DeWalt
- Laserwasserpass Einhell
- Laserwasserpass Silverline
- Laserwasserpass Leica
- Laserwasserpass Brüder Mannesmann
- Laserwasserpass Toolcraft
- Laserwasserpass Craftsman
- Laserwasserpass Fluke
- Laserwasserpass Stabila
- Laserwasserpass Neo
- Laserwasserpass PLS
- Laserwasserpass Futech
Neueste Bedienungsanleitung für -Kategorien-
23 September 2024
5 September 2024
4 September 2024
3 September 2024
1 September 2024
1 September 2024
30 August 2024
29 August 2024
28 August 2024
25 August 2024