Ozito IFT-520 Bedienungsanleitung
Ozito
Laserwasserpass
IFT-520
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Ozito IFT-520 (4 Seiten) in der Kategorie Laserwasserpass. Dieser Bedienungsanleitung war fĂźr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
IN FRARED THE RMO ME TER
INFRAR ED THERMOMETER
INFRARED
THERMOMETER
8:1 DISTANCE TO SPOT RATIO
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 2 x 1.5V AAA Batteries
Measurable Range: -38 to 520°C (-36.4 to 968°F)
Operating Temperature: 0 to 40°C (32 to 104°F)
Accuracy: ¹2°C or ¹2% (@T
amb: 23 ¹ 3°C)
Laser: 660nm Class 2
Distance to Spot Ratio: 8:1
Response Time: â¤1s
Weight: 0.135kg
IFT-520
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase. If a product is defective it will be replaced
in accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: valve adapters and accessories.
WARNING! The following actions will result in the warranty
being void.
⢠If the tool has been operated on a supply voltage other than that
speciďŹed on the tool.
⢠If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the instruction
manual.
⢠If the tool is disassembled or tampered with in any way.
⢠Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE
RELATING TO THE WARRANTY POLICY OR
PROCEDURE.
OZITO Australia/New Zealand (Head OfďŹce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ozito.com.au
Infrared Thermometer
2 x AAA Batteries
1019
GENERAL POWER TOOL SAFETY WARNINGS
BATTERY & LASER SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, îżre and/or serious injury.
Save all warnings and instructions for future reference. The
term âpower toolâ in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as
in the presence of îammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodiîżed plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inîuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the oó°¨-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your îżnger
on the switch or energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and oó°¨.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aó°¨ect the
power toolâs operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
dió°¨erent from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualiîżed repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
WARNING! The appliance is not to be used by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction.
Young children should be supervised to ensure that they do not play
with the appliance.
1. Do not store or use the tool and battery pack in locations where the
temperature may reach or exceed 40
0C (such as inside sheds or metal
buildings in summer).
2. Do not incinerate the battery pack even if it is seriously damaged or is
completely worn out. The battery can explode in a îżre.
Additional Safety Instructions for Laser Lights
The laser light/laser radiation in this unit is a Class 2 laser with a maximum
of 1mW and 650nm wavelength. These lasers do not normally present an
optical hazard, however staring at the beam may cause îash blindness.
WARNING!
Do not stare directly at the laser beam. A
hazard may exist if you deliberately stare into the beam. Please
observe all the safety instructions below:
1. The laser shall be used and maintained in accordance with the
manufacturers instructions.
2. Never aim the beam at any person or an object other than the workpiece.
3. The laser beam shall not be deliberately aimed at personnel and shall be
prevented from being directed towards the eye of a person for longer than
0.25s.
4. Always ensure the laser beam is aimed at a sturdy work piece without
reîective surfaceâ, i.e. wood or rough coated surfaces are acceptable. Bright
shiny reîective sheet steel or the like is not suitable for laser use as the
reîective surface could direct the beam back at the operator.
5. Do not change the laser light assembly with a dió°¨erent type. Repairs must
only be carried out by a power tool repairer.
Use of controls or adjustments or performance of procedures other
than those speciîżed herein may result in hazardous radiation exposure.
Please refer to the relevant Australian standards, AS 2397 and AS/NZS2211
for more information on Lasers.
The beneďŹts provided under this warranty are in addition to other
rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You
are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount
to a major failure.
Generally you will be responsible for all costs associated with a claim
under this warranty, however, where you have suffered any additional
direct loss as a result of a defective product you may be able to claim
such expenses by contacting our customer service helpline above.
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
°C/°F
HOLD LOCK
°C °F
INFRARED THERMOMETER
1. Digital Display
2. Temperature Units Button
3. Wrist Lanyard
4. Battery Compartment
5. Measuring Trigger
6. IR Sensor
7. Point Laser
INFRARED THERMOMETER
KNOW YOUR PRODUCT
1. BATTERIES
SETUP & PREPARATION
3
7
1
2
5
6
4
Installing The Battery
The infrared thermometer requires 2 x 1.5V AAA batteries to operate.
1. Remove the battery
compartment lid by sliding it
down the handle.
2. Insert the batteries into the compartment.
Note: Refer to the battery symbols in the
compartment and check that the batteries
have been inserted in the correct orientation.
3. Replace the battery compartment lid.
Low Battery Indicator
The battery icon in the top left corner of the display indicates the
status of the battery.
Battery power is okay; proceed
with measurements.
The batteries are low and need to be
replaced.
The batteries are exhausted.
Replace the batteries to continue
use of the thermometer.
HOLD LOCK
°C °F
HOLD LOCK
°C °
HOLD LOCK
°C °F
IFT-520
2. CONTROLS 3. USING THE THERMOMETER
OPERATION
Laser Pointer
The laser pointer automatically
lights up when the trigger is
pulled to indicate the centre of
the measurement area.
Note: The actual measurement
area will depend on the distance
between the unit and the target.
Optical Range (Distance To Spot Ratio)
The 8:1 optical range ratio refers
to the ratio of distance from
surface over measuring spot
diameter. For example if you
measure a surface 80mm away
from the unit, then the measuring
spot will be 10mm in diameter.
For accurate results the surface
you are measuring should be
larger than the spot diameter.
Backlight
The screen backlight automatically comes on when the trigger is
pulled and shuts of after 6seconds of inactivity.
Temperature Units
The temperature can be displayed in
both Celsius and Fahrenheit. Press the
temperature units button to toggle between
the two.
Note: The selected display unit will be shown
on the top right of the screen.
°C °F
80mm
Measurement
Area
10mm
INF RARED T HERMOMET ER
°C/°F
HOLD LOCK
°C
HOLD LOCK
°F
WARNING! ENSURE LASER WINDOW IS NOT AT EYE
LEVEL OR DIRECTED TOWARDS OTHERS WHEN
OPERATING THE THERMOMETER.
Measuring Temperatures
1. Select the desired measuring units.
2. Hold the tool by its handle and
point it towards the surface to
be measured.
3. Press and hold the trigger to
start measuring the surface
temperature. The real time
value will be displayed on
screen.
Note: The âHOLDâ icon will disappear from the screen, indicating that
scanning is occuring.
4. Once the trigger is released,
the last reading will remain on
screen.
Note: The âHOLDâ icon will
display on screen.
5. After 15 seconds of inactivity, the unit will automatically turn oó°¨ to
conserve power.
Operating Tips
WARNING! KEEP THE THERMOMETER AT LEAST
7CM AWAY FROM HOT SURFACES TO PREVENT
DAMAGE TO THE UNIT.
⢠For best results, the measurement should be taken as close as
safely possible. Measuring at moderate distances is possible but
other external sources of light may aó°¨ect the reading.
⢠Before measuring, be sure to clean surfaces that are covered with
frost, oil grime, etc.
⢠If a surface is highly reîective, apply masking tape or îat black
paint prior to measuring.
⢠Steam, dust, smoke can obscure measurements.
⢠Measurement cannot be made through transparent surfaces such
as glass, as the surface may skew the measurement.
⢠Keep the lens of the thermometer clean and free of scratches.
⢠To improve the accuracy of the results, allow time for the
thermometer to acclimatise to the temperature of the surroundings.
INF RARED TH ERM OM ETE R
HOLD
°C
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Laserwasserpass |
| Modell: | IFT-520 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito IFT-520 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laserwasserpass Ozito
27 August 2024
27 August 2024
6 August 2024
6 August 2024
5 August 2024
2 August 2024
28 Juli 2024
28 Juli 2024
7 Juli 2024
Bedienungsanleitung Laserwasserpass
- Laserwasserpass Makita
- Laserwasserpass Bosch
- Laserwasserpass Laserliner
- Laserwasserpass Skil
- Laserwasserpass Hilti
- Laserwasserpass DeWalt
- Laserwasserpass Einhell
- Laserwasserpass Silverline
- Laserwasserpass Leica
- Laserwasserpass BrĂźder Mannesmann
- Laserwasserpass Toolcraft
- Laserwasserpass Craftsman
- Laserwasserpass Fluke
- Laserwasserpass Stabila
- Laserwasserpass Neo
- Laserwasserpass PLS
- Laserwasserpass Futech
Neueste Bedienungsanleitung fĂźr -Kategorien-
23 September 2024
5 September 2024
4 September 2024
3 September 2024
1 September 2024
1 September 2024
30 August 2024
29 August 2024
28 August 2024
25 August 2024