Ozito LMBL-1018 Bedienungsanleitung

Ozito Laubbläser LMBL-1018

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito LMBL-1018 (12 Seiten) in der Kategorie Laubbläser. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
ELECTRIC
BLOWER
1800W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1800 Watt
Input: 230–240V~50Hz
No Load Speed: 15,000/min
Max. Air Volume: 350m3/hour
Max. Air Speed: 320km/hour
Noise Level: 100dB
Weight: 2.8kg
LMBL-1018
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: blower tube,
carbon brushes.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0617
Blower
Direction Nozzle
Blow Tube
Assembly Screws
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Connecting the blow tube and direction nozzle
1. Unpack the blow tube and
direction nozzle.
2. Connect larger end of the direction
nozzle to the smaller end of the
blow tube.
3. Ensure that all 3 buttons on the blow tube
sit within the holes in the direction nozzle.
4. Connect the blow tube to the
blower housing, ensuring that the
blower housing tabs click into the
holes in the blow tube.
5. Secure the blower tube to the
blower housing with the two 12mm
screws.
1. Direction nozzle
2. Blow tube
3. Handle
4. On/Off trigger
5. Cord retaining hook
6. Air intake vent
7. Assembly screws 2 x 12mm
ELECTRIC BLOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2
7
3 4
6
5
WARNING! ALWAYS ENSURE THE BLOWER IS
DISCONNECTED FROM THE POWER SUPPLY
DURING ASSEMBLY AND/OR MAINTENANCE.
Using the extension cord retaining hook
The cord retaining hook is used to “anchor” an extension cord when it is
connected to the power lead of the tool. It prevents the extension cord
from being accidentally disconnected from the blower’s power cable or
shaken loose during use. It should be used at all times.
1. Make a loop in the end of the
extension lead and pass the loop
though the hole in the rear of the
handle.
2. Hook the loop over the cord
retaining hook. Pull the extension
cord to secure it in position over the
cord retaining hook.
3. Connect the extension
lead to the power cord.
Route the power and
extension cord away
from the work area to
prevent contact with the
blower.
NOTE: Always use an approved extension lead suitable for the power
input of this tool.
Turning ON
To turn the blower on, depress
the trigger switch.
Turning OFF
To turn the blower off, release
the trigger switch.
2. TRIGGER SWITCH
OPERATION
WARNING! THE POWER SUPPLY FOR THIS
PRODUCT SHOULD BE PROTECTED BY A
RESIDUAL CURRENT DEVICE RATED AT 30mA OR LESS.


Produktspezifikationen

Marke: Ozito
Kategorie: Laubbläser
Modell: LMBL-1018

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito LMBL-1018 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Laubbläser Ozito

Bedienungsanleitung Laubbläser

Neueste Bedienungsanleitung fĂźr -Kategorien-