Ozito GGM-010 Bedienungsanleitung

Ozito Klebepistole GGM-010

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito GGM-010 (2 Seiten) in der Kategorie Klebepistole. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

WARNING! Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re and/or serious

injury.

Save all warnings and instructions for future reference. The term “power tool”

in the warnings refers to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of ammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of

electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your nger on the switch or energising power tools

that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

h. Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of starting

the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to

be performed. Use of the power tool for operations different from those intended

could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control

of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using only

identical replacement parts. This will ensure that the safety of the power tool is

maintained.

GLUE GUN

10W

2 3 4 5 6 7

Glue Gun Safety Tips

• Do not touch hot glue.

• Do not remove the glue from skin in the event of accidental contact. Immediately

run cold water over and seek medical advice.

• Do not leave glue gun unattended while in use or directly after use.

• Do not touch the nozzle end of the gun while in use or directly after use.

• Do not inhale vapours generated while in use.

• Do not attempt to feed any other materials through the glue gun, eg. crayons,

sealants, candles etc.

POWER TOOL WARNINGS

ELECTRICAL SAFETY

WARNING! When using mains-powered tools, basic safety

precautions, including the following, should always be

followed to reduce risk of re, electric shock, personal injury

and material damage.

Read the whole manual carefully and make sure you know how to switch

the tool off in an emergency, before operating the tool.

Save these instructions and other documents supplied with this tool for

future reference.

The manufacturer cannot accept any liability for damage or accidents which

arise due to a failure to follow these instructions and the safety information.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for

Australia and New Zealand.

If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualied persons in order to avoid hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this

tool. Before use, inspect the extension lead for signs of damage, wear and

ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely.

Use of an extension lead not suitable for the power input of the tool or which

is damaged or defective may result in a risk of re and electric shock.

To reduce the risk of electric shock, we recommend the use of a residual

current device (rated 30mA or less).

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Young children should be supervised to ensure that they do not play with

the appliance.

GGM-010

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 230-240V ~50Hz

Output: 10W

Flow Rate: 6-8g/min

Glue Stick Diameter: 7.2mm

Glue Stick Length: 100mm

Dual Heat Temperatures: 170° - 190°C

Weight: 0.45kg

1 Glues Sticks x 2

2 Protective Nozzle Cover

3 Metal Stand

4 Flow Control Trigger

5 Glue Display

6 Glue Stick Entry

7 Power Cord

ozito.com.au

GGM-010

1. LOADING A GLUE STICK

2. OPERATION

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY

YOU MUST RETURN THE PRODUCT TO YOUR NEAREST

BUNNINGS WAREHOUSE WITH YOUR BUNNINGS

PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE

THE MODEL NUMBER AND DATE OF PURCHASE

AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE

WILL TAKE YOUR CALL AND ANSWER ANY

QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

The beneﬁts provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are

entitled to a replacement or refund for a major failure and for compensation

for any other reasonably foreseeable loss or damage. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under

this warranty, however, where you have suffered any additional direct loss as

a result of a defective product you may be able to claim such expenses by

contacting our customer service helpline above.

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. If a

product is defective it will be replaced in accordance with the terms of this

warranty. Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other than that

speciﬁed on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

OZITO Australia/New Zealand (Head Ofﬁce)

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Installing the Glue Stick

2 Squeeze the ow control

trigger multiple times to allow

the glue stick to be pushed

down.

1 Insert the glue

stick into the glue

stick entry and

slide down gently.

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

ALLOWED TO COOL DOWN BEFORE PERFORMING ANY

OF THE FOLLOWING TASKS.

3 Press the surfaces

to be glued

together within

15 seconds for a

strong bond.

2 Squeeze the trigger ow

control to release the glue.

4 To stop the ow of glue from

the gun, release the ow

control trigger.

Tip: Ensure the glue sticks are

heated fully to allow an even ow

of glue.

1 Plug the power cord into a

power point and switch on.

WARNING! DO NOT ALLOW HOT GLUE TO COME IN

CONTACT WITH PRODUCT HOUSING DURING USE.

DESCRIPTION OF SYMBOLS

V Volts Hz Hertz

~ Alternating current W Watts

°C Degrees Celsius Read instruction manual

Double insulated Regulator compliance mark

Produktspezifikationen

Marke:	Ozito
Kategorie:	Klebepistole
Modell:	GGM-010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito GGM-010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Klebepistole Ozito

Ozito GGM-010 Bedienungsanleitung

16 Juli 2024

Ozito GGL-7000 Bedienungsanleitung

7 Juli 2024

Ozito GGM-010U Bedienungsanleitung

26 Juni 2024

Bedienungsanleitung Klebepistole

Neueste Bedienungsanleitung für -Kategorien-

MSW -AAH-01 Bedienungsanleitung

16 Oktober 2024

Rapid EG212 Bedienungsanleitung

11 Oktober 2024

Einhell BT-GG 30 K Bedienungsanleitung

7 September 2024

Einhell BT-GG 200 Bedienungsanleitung

5 September 2024

Hazet 9042N-1 Bedienungsanleitung

4 September 2024

Hazet 2162-2 Bedienungsanleitung

4 September 2024

DeWalt DWHTGR50 Bedienungsanleitung

4 September 2024

Hikoki AL 18DA Bedienungsanleitung

3 September 2024

Duro Pro D-AK 3,6/1 Li Bedienungsanleitung

3 September 2024

Einhell Bavaria BKP 200 Bedienungsanleitung

1 September 2024