Oricom TP5 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Oricom TP5 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1 General Information
Warnings
• The telephone is designed for indoor use only. Do not install the telephone
in areas where there is the risk of an explosion, excessive exposure to
smoke, dust, vibrations, chemicals, moisture and heat.
• Do not install in damp locations such as a bathroom or laundry, do not
expose the unit to direct sunlight.
• Do not use your telephone during an electrical thunderstorm as it is
possible to get an electric shock. Refer to information contained in
Telstra White pages directory.
• The earpiece of the handset may attract small metal objects such as
staples and pins. Care should be taken when placing the handset near
these items.
Notes for operation in New Zealand
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with the minimum
conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with
another item of Telepermitted equipment of a different make or model, nor
does it imply that any product is compatible with all of Telecom’s network
services. This device may be subject to ringing or bell tinkle when certain
other devices are connected to the same line. If this occurs, the problem
should not be referred to the Telecom Faults service.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance only if you
wish to connect more than 1 telephone to your telephone line. A standard
telephone line has a maximum REN capacity of 3 (RN of 5). It is possible to
connect 3(5) devices with a REN of 1 (RN of 1) with no degradation to the
product’s performance. Exceeding this limit may cause the volume of the
ringer in any phone to decrease or not ring at all.
Location of controls
1. Receiver
2. Hook Switch
3. Keypad
4. Pause Button
5. Mute Button
1
2
3
4
5
6
7
8
9
10
N13134
The A-Tick symbol indicates that this product complies with all current Australian
ACMA standards.
PA U S E RE D IA L
10 0 60 0
MU T E
6. Transmitter
7. Redial Button
8. Recall Setting Switch
9. Ringer High/Low/Off Switch
10. Ringer Light
Installation
Connecting the telephone
1. Plug one end of the curly cord into the socket on the handset.
2. Plug the other end of the curly cord into the socket at the end of the base.
Thread the curly cord through the groove toward the back of the base.
3. Plug the telephone cable supplied into the socket on the bottom of the base.
4. Plug the other end of the telephone cable into the wall socket. Thread
the curly cord through the groove toward the back of the base.
Note: In Australia some phone wall sockets are the old “non modular” style.
If you have this type of wall socket you will need to purchase a modular
converter plug” (not supplied). These can be obtained from electronic stores.
Operation
Making a call
1. Lift the handset and wait for the dial tone.
2. Use the keypad to enter the desired telephone number.
3. To end the call, replace the handset or press the hook switch to make another call.
Receiving incoming calls
1. If you receive an incoming call, the phone will ring and the red Calls light will flash.
2. To take the call, simply lift the handset.
Redial function
If a number that you have dialled is engaged or you were unable to get
2 4 1
through to anybody. The last number dialled will be saved in the telephone
automatically. To use the redial facility, proceed as follows:
1. Lift the handset.
2. Press the REDIAL button. The last saved redial number will now be dialled.
MUTE
1. During a call, press and hold MUTE button. Your caller cannot hear you now.
2. Release MUTE button to resume your call.
Pause
You can insert a 3.6 seconds pause into dialing in order to access custom
and telebanking services, long distance, etc. Press Pause button at the
desired point in number. Press Pause button again if an additional 3.6 seconds
is needed.
Recall
Press the Recall button followed by the extension number to transfer calls
when connected to a PBX (100ms TBR only).
Ringer volume control
The ringer can be adjusted using the Ringer switch located on the left-hand
side of the telephone. You can adjust the ringer from a loud (High) to a soft
(Low) sound level. When you don’t want to be disturbed, slide the RINGER
switch to the Off position.
Hearing aid compatible
This telephone is hearing aid compatible. Select the T mode on your hearing
aid to enable this feature.
3
Select country version
For Australia select 100 or for use in New Zealand Select 600 by sliding the
recessed switch on the front of the handset with a paper clip or tip of a pen.
NOTE: If the switch is not in the correct position , the recall function will not
operate correctly
Wall mounting
Method A.
1. Use two screws for fixing (not supplied).
2. At the desired location drill two holes one above the other, 100mm
apart, and leave the screws protruding 5mm from the wall.
3. Plug the short telephone line cord (supplied) into the base of the phone;
plug the other end into the telephone wall plate socket.
4. Now place the telephone base over the screws and gently push forwards
and then downwards.
5. Slide out the handset guide on the base, rotate it 180° and replace it.
The handset will rest on the guide when wall mounted.
Method B. If you wish to fit to an existing telephone wall plate with modular
connector.
1. Attach the wall mount bracket (supplied) to the base of the phone.
2. Plug the short telephone line cord (supplied) into the base of the phone;
plug the other end into the telephone wall plate socket.
3. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate.
4. Gently push the phone flush against the wall plate then slide the phone
downwards locking it into place.
5. Slide out the handset guide on the base, rotate it 180° and replace it.
The handset will rest on the guide when wall mounted.
Network services
Access to additional network services can be gained by using the Recallbutton ,
* and # keys. Contact your network operator for more information.
8.2 Cleaning and care
The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never
use cleaning agents, particularly aggressive solvents. Apart from occasional
cleaning of the case, no other care is necessary. The rubber feet of the base
station are not resistant to all cleaning agents. The telephone feet do not
normally leave any marks on the surface. However, on account of the
multitude of varnishes and surface finishes used, surface marks caused by
the feet of the unit cannot be ruled out. The manufacturer can therefore not
be held responsible for possible damage to furniture or the like.
Slimline Phone
TP5
5 6
Ref: 23052012
Keep this user guide for future reference
Always retain your proof of purchase in case of warranty service and
register your warranty on line at:-www.oricom.com.au
7
8.3 Customer Support
If you have any problems setting up or using this product you will find useful tips
and information in the Troubleshooting section of this user guide as well as
“Frequently Asked Questions” on our website www.oricom.com.au.
If you have further questions about using the product after reviewing the resources
above or would like to purchase replacement parts or accessories please call our
Customer Support Team. Our dedicated local support team are more likely to be
able to help you than the retailer where you made your purchase.
Important
Please retain your purchase receipt and attach to the back page of this user guide
as you will need to produce this if warranty service is required. Take a few
moments to register your product online: www.oricom.com.au
8.4 How to make a claim under Warranty in Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team, contact details follow.
• A Customer Support Team member will verify after troubleshooting with
you if your product qualifies under warranty. If so, they will give you a
Product Return Authorisation number.
• We will then email or fax a Return Authorisation form and a Repair
Notice (if necessary), together with instructions on how to return the
goods for warranty service.
Please note that if a Customer Support Team member advises that your product
does not qualify for return, this warranty does not apply to your product.
Products that are authorised to be returned to Oricom in Australia must
include all of the following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your original copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this warranty excludes expenses incurred by you in returning any
faulty product to us. You must arrange and pay any expenses incurred (including
postage, delivery, freight, transportation or insurance of the product) to return the
faulty product to us, however, we will arrange delivery of the repaired or replaced
faulty product to you.
Important Information
Repair Notice
Please be aware that the repair of your goods may result in the loss of any
user-generated data (such as stored telephone numbers, text messages and
contact information). Please ensure that you have made a copy of any data
saved on your goods before sending for repair.
Please also be aware that goods presented for repair may be replaced by
refurbished goods or parts of the same type rather than being repaired.
8.5 Warranty Information (Australia)
This Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369,
Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after referred to
as “Oricom”.
Oricom makes no other warranties or conditions, express or implied, including
as to acceptable quality and fitness for a particular purpose, except as stated in
this Warranty. Any implied warranties that may be imposed by law are limited in
duration to the Warranty Period.
Oricom warrants that the product is free from defects in materials or
workmanship during the Warranty Period. This Warranty does not extend to
any product from which the serial number has been removed or was purchased
outside of Australia.
This warranty in no way affects your statutory warranty rights under the
Competition and Consumer Act 2010 or any other similar legislation.
The Warranty Period will be 1 year from the date of purchase of the product
evidenced by your dated sales receipt. You are required to provide proof of
purchase as a condition of receiving warranty services.
You are entitled to a replacement product or repair of the product according to the
terms and conditions of this document if your product is found to be faulty within the
Warranty Period. This Warranty extends to the original purchaser only and is not
transferable. Rechargeable battery cells and rechargeable battery packs (if
supplied) with this product are covered under this warranty for a period of 90 days.
Products distributed by Oricom are manufactured using new materials or new and
used materials equivalent to new in performance and reliability. Spare parts may
be new or equivalent to new. Spare parts are warranted to be free from defects in
material or workmanship for thirty (30) days or for the remainder of the Warranty
Period of the Oricom branded product in which they are installed, whichever is
longer. During the Warranty Period, Oricom will where possible repair and if not
replace the faulty product or part thereof. All component parts removed under this
Warranty become the property of Oricom. In the unlikely event that your Oricom
product has a recurring failure, Oricom may, subject to the Competition and
Consumer Act 2010, at its discretion, elect to provide you with a replacement
product of its choosing that is at least equivalent to your product in performance.
Oricom does not warrant that the operation of the product will be uninterrupted
or error free.
Oricom is not responsible for damage that occurs as a result of your failure to
follow the instructions that came with the product. These terms and conditions
together with any specific terms and conditions contained in the user guide to
the product purchased constitute the complete and exclusive agreement
between you and Oricom regarding the product.
No change to the conditions of this Warranty is valid unless it is made in writing
and signed by an authorised representative of Oricom.
Oricom will not be in breach of a warranty expressly set out in this User Guide
or under the Competition and Consumer Act 2010 and excludes any liability for
damages or any other remedy arising under any other legislation or the
common law if the damage occurs as a result of:
1. failure by you to adhere to the warnings and follow the instructions set
out in this user guide for the proper installation and use of the product;
2. negligence on your part or misuse by you of the product;
3. an uncontrollable external cause which results in the product not functioning
including but not limited to power failure, lightning or over voltage; and
4. modification to the product or services carried out on the product by
anyone other than Oricom or Oricom’s authorised service provider.
Oricom will not be liable for any damages caused by the product or the failure of
the product to perform, including any lost profits or savings or special, incidental
or consequential damages. Oricom is not liable for any claim made by a third
party or made by you on behalf of a third party. This limitation of liability applies
whether damages are sought, or a claim made, under this Warranty or as a tort
claim (including negligence and strict product liability), a contract claim or any
other claim. However, this limitation of liability will not apply to claims for personal
injury. Nothing in this Warranty excludes, restricts or modifies any condition,
warranty, right or remedy which pursuant to the Competition and Consumer Act
2010 applies to this Warranty and which may not be so excluded, restricted or
modified. For warranties that cannot be excluded, restricted or modified, Oricom
limits the remedies available to those specified in the relevant legislation.
Oricom products come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
Contact details for Oricom support and warranty claims in Australia
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756
Australia
Email: support@oricom.com.au
Phone: 1300 889 785
(Monday to Friday 8am to 6pm AEST)
Web: www.oricom.com.au
Fax: (02) 4574 8898
Contact details for Oricom support and warranty claims in New Zealand
Email: support@oricom.co.nz
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz


Produktspezifikationen

Marke: Oricom
Kategorie: Nicht kategorisiert
Modell: TP5

Brauchst du Hilfe?

Wenn Sie Hilfe mit Oricom TP5 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Oricom

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-