Oricom TP4 Bedienungsanleitung

Oricom Nicht kategorisiert TP4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Oricom TP4 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
3 Installation
3.2
5 Cleaning and care
6 Oricom Support & Warranty
english 2english 1
english 6english 5
english 9
english 4
english 8
english 3
english 7
english english 10 11
Index
1 General Information
Warnings
• The telephone is designed for indoor use only. Do not
install the telephone in areas where there is the risk of
an explosion, excessive exposure to smoke, dust,
vibrations, chemicals, moisture and heat.
• Do not install in damp locations such as a bathroom
or laundry, do not expose the unit to direct sunlight.
• Do not use your telephone during an electrical
thunderstorm as it is possible to get an electric shock.
Refer to information contained in Telstra White pages
directory.
• The earpiece of the handset may attract small metal
objects such as staples and pins. Care should be
taken when placing the handset near these items.
2 Location of controls
1. Hook switch
2. Keypad
3. Recall button
4. Mute Button
5. Pause Button
6. Redial button
7. Telephone line socket
8. Ringer adjusting switch
9. Recall time control switch
N13134
The A-Tick symbol indicates that this
product complies with all current
Australian ACMA standards.
3.1
Connecting the telephone
1. Plug one end of the curly cord into the socket on the handset.
2. Plug the other end of the curly cord into the socket at the
end of the base.
3. Plug the telephone line cord supplied into the socket on the
bottom of the base. Thread the line cord through the groove
toward the back of the base. So the phone base will lay at.
4. Plug the other end of the telephone line cord into the wall
socket.
Note: In Australia some phone wall sockets are the old “non
modular” style. If you have this type of wall socket you will
need to purchase a modular converter plug” (not supplied).
These can be obtained from electronic stores.
Wall mounting
Method A.
1. Use two screws for xing (not supplied).
2. At the desired location drill two holes one above the other,
75mm apart, and leave the screws protruding 5mm from
the wall.
3. Plug the telephone line cord into the base of the phone;
plug the other end into the telephone wall plate socket.
4. Now place the telephone base over the screws and gently
push forwards and then downwards.
5. Slide out the handset guide on the base, rotate it 180°
and replace it. The handset will rest on the guide when
wall mounted.
Pack Contents
TP4 telephone
Curly cord
Long line cord
4 Operation
4.1 Making a call
4.2 Receiving incoming calls
4.3 Redial function
1. Lift the handset and wait for the dial tone.
2. Use the keypad to enter the desired telephone number.
3. To end the call, replace the handset or press the hook
switch to make another call
1. If you receive an incoming call, the phone will ring.
2. To take the call, simply lift the handset.
If a number that you have dialled is engaged or you were
unable to get through to anybody. The last number dialled
will be saved in the telephone automatically. To use the
redial facility, proceed as follows:
1. Lift the handset.
2. Press the REDIAL button. The last saved redial number will
now be dialled.
4.4 MUTE
1. During a call, press and hold MUTE button. Your caller
cannot hear you now.
2. Release MUTE button to resume your call.
4.5 Pause
4.6 Recall
You can insert a few seconds pause into dialling in order to
access custom and telebanking services, long distance, etc.
Press button at the desired point in number. Press Pause
Pause button again if an additional 3.6 seconds is needed.
Press the button followed by the extension number to Recall
transfer calls when connected to a PBX.
4.7 Ringer volume control
The ringer can be adjusted using the switch located Ringer
on the back of the telephone. You can adjust the ringer from
a loud (High) to a soft (Low) sound level.
4.8 Recall time setting
The recall time setting switch should be set to 100ms. The
switch is located at the bottom of the phone.
The surface of the case can be cleaned with a dry, soft,
lint-free cloth. Never use cleaning agents, particularly
aggressive solvents. Apart from occasional cleaning of the
case, no other care is necessary. The rubber feet of the
base station are not resistant to all cleaning agents. The
telephone feet do not normally leave any marks on the
surface. However, on account of the multitude of varnishes
and surface finishes used, surface marks caused by the
feet of the unit cannot be ruled out. The manufacturer can
therefore not be held responsible for possible damage to
furniture or the like.
Customer Support
If you have any problems setting up or using this product
you will nd useful tips and information in the Troubleshooting
section of this user guide as well as “Frequently Asked
Questions” on our website www.oricom.com.au.
If you have further questions about using the product after
reviewing the resources above or would like to purchase
replacement parts or accessories please call our Customer
Support Team. Our dedicated local support team are more
likely to be able to help you than the retailer where you made
your purchase.
Important
Please retain your purchase receipt and attach to the back
page of this user guide as you will need to produce this if
warranty service is required. Take a few moments to register
your product online: www.oricom.com.au
MUTE REC ALL PAUSE
Important Information
Repair Notice
Please be aware that the repair of your goods may result in the
loss of any usergenerated data (such as stored telephone
numbers, text messages and contact information). Please
ensure that you have made a copy of any data saved on your
goods before sending for repair. Please also be aware that
goods presented for repair may be replaced by refurbished
goods or parts of the same type rather than being repaired.
Express Warranty (Australia)
This Express Warranty is provided by Oricom International Pty
Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South
Windsor NSW 2756, herein after referred to as “Oricom”.
Oricom products come with guarantees that cannot be
excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Oricom warrants that the product is free from defects in
materials or workmanship during the Express Warranty
Period. This Express Warranty does not extend to any product
from which the serial number has been removed or was
purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or
modies any condition, warranty, guarantee, implied term,
right or remedy pursuant to the Australian Consumer Law and
which may not be so excluded, restricted or modied. For
such conditions, terms, guarantees and warranties that
cannot be excluded, restricted or modied, Oricom limits the
remedies available to extent permitted in the relevant
legislation.
The Express Warranty Period will be 3 years from the date of
purchase of the product evidenced by your dated sales
receipt. You are required to provide proof of purchase as a
condition of receiving Express Warranty services.
You are entitled to a replacement product or repair of the
product at our discretion according to the terms and
conditions of this document if your product is found to be
faulty within the Express Warranty Period. This Express
Warranty extends to the original purchaser only and is not
transferable.
Products distributed by Oricom are manufactured using new
materials or new and used materials equivalent to new in
performance and reliability. Spare parts may be new or
equivalent to new. Spare parts are warranted to be free from
defects in material or workmanship for thirty (30) days or for
the remainder of the Express Warranty Period of the Oricom
branded product in which they are installed, whichever is
longer. During the Express Warranty Period, Oricom will where
possible repair and if not replace the faulty product or part
thereof. All component parts removed under this Express
Warranty become the property of Oricom. In the unlikely event
that your Oricom product has a recurring failure, Oricom may
always, subject to the Competition and Consumer Act 2010,
at its discretion, elect to provide you with a replacement
product of its choosing that is at least equivalent to your
product in performance.
No change to the conditions of this Express Warranty is valid
unless it is made in writing and signed by an authorised
representative of Oricom.
Oricom will not be liable under this Express Warranty, and to
the extent permitted by law will not be liable for any defect,
loss, damage or injury arising out of or in connection with a:
1. Failure by you to adhere to the warnings and follow the
instructions set out in this user guide for the proper installation
and use of the product;
2. Wilful misconduct or deliberate misuse by you of the
product;
3. Any external cause beyond our control, including but not
limited to power failure, lightning or over voltage; or
4. Modication to the product or services carried out on the
product by anyone other than Oricom or Oricom’s authorised
service provider.
How to make a claim under your Express Warranty
in Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team, 1300 889
785 or support@ oricom.com.au.
• A Customer Support Team member will verify after
troubleshooting with you if your product qualies under
warranty. If so, they will give you a Product Return
Authorisation number.
• We will then email or fax a Return Authorisation form and a
Repair Notice (if necessary), together with instructions on how
to return the goods for warranty service.
Please note that if a Customer Support Team member advises
that your product does not qualify for return, this warranty
does not apply to your product. Products that are authorised
to be returned to Oricom in Australia must include all of the
following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your original
copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses
incurred by you in returning any faulty product to us. You
must arrange and pay any expenses incurred (including
postage, delivery, freight, transportation or insurance of the
product) to return the faulty product to us, however, we will
arrange delivery of the repaired or replaced faulty product to
you.
7 Express Warranty Information
1. General Information 2
2. Location of controls 3
3. Installation 4
4. Operation 5
4.1. Making a call ...................................................... 5
4.2. Receiving incoming calls .................................... 5
4.3. Redial function ................................................... 5
4.4. Mute .................................................................. 5
4.5. Pause ................................................................. 5
4.6. Recall ................................................................ 5
4.7. Ringer volume control ........................................ 5
4.8. Recall time setting .............................................. 5
6 Oricom Support 7
5. Cleaning and care 6
7. Express Warranty Information 8
.
3.1. Connecting the telephone
.................................. 4
3.2. Wall mounting
.................................................... 4
Trimline Phone
TP4
Keep this user guide for future referenc e
Always retain your proof of purchase in case of warranty service and
r er y r warregist ou anty on line a w.orico o aut: ww m.c m.
Contact details for Oricom Support and Express Warranty Claims in Australia
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756 Australia
Email: support@oricom.com.au
Phone: 1300 889 785 or 02 4574 8888 (Monday to Friday 8am to 6pm AEST) Fax: (02) 4574 8898
Web: www.oricom.com.au
Contact details for Oricom Support and Express Warranty Claims in New Zealand
Email: support@oricom.co.nz
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz
Ref: 13052014

Produktspezifikationen

Marke: Oricom
Kategorie: Nicht kategorisiert
Modell: TP4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Oricom TP4 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Oricom

Oricom

Oricom Eclipse OBHSSOO Bedienungsanleitung

19 August 2024
Oricom

Oricom TP4 Bedienungsanleitung

17 August 2024
Oricom

Oricom PRO610 Bedienungsanleitung

15 August 2024
Oricom

Oricom WAKE'N' SHAKE WNS10 Bedienungsanleitung

13 August 2024
Oricom

Oricom VISO10 Bedienungsanleitung

12 August 2024
Oricom

Oricom OBHAD200 Bedienungsanleitung

12 August 2024
Oricom

Oricom CARE820 Bedienungsanleitung

9 August 2024
Oricom

Oricom CARE80 Bedienungsanleitung

8 August 2024
Oricom

Oricom TP100 Bedienungsanleitung

8 August 2024
Oricom

Oricom VAC500 Bedienungsanleitung

7 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024