Numark DM3002X Bedienungsanleitung

Numark Mischpulte DM3002X

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Numark DM3002X (12 Seiten) in der Kategorie Mischpulte. Dieser Bedienungsanleitung war fĂĽr 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Professional Disc Jockey Products
DM3000X/DM3002X
DJ MIXERS
Owner’s Manual
©2001 Industries http://www.numark.com
DM3000X/DM3002X
- The Leader in DJ Technology
©2001 Industries - 2 - http://www.numark.com
Safety Information
SAFETY INSTRUCTIONS
a) Read Instructions - All the safety and operating
instructions should be read before this product is
connected and used.
b) Retain Instructions - The safety and operating
instructions should be kept for future reference.
c) Heed Warnings - All warnings on this product and in
these operating instructions should be followed.
d) Follow Instructions - All operating and other instructions
should be followed.
e) Water and Moisture -
This product should be
kept away from direct
contact with liquids.
f) Heat - Avoid placing this
product to close to any high heat sources such as
radiators.
g) Ventilation - The appliance should be situated so that it’s
location or position does not interfere with it’s proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug,
or similar surface that may
block the ventilation
opening; or, placed in a
built-installation, such as
bookcase or cabinet that may
impede the flow of air through the ventilation openings.
h) Power Sources - This product should be connected to a
power supply only of the type described in these
operating instructions, or as marked on the unit.
i) Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked upon or
pinched by items placed on or against them. When
removing the cord from a power outlet be sure to remove
it by holding the
plug attachment
and not by pulling
on the cord.
j) Object and Liquid Entry - Take care that objects do not
fall into and that liquids are not spilled into the inside of
the mixer.
k) Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
l) Non-use Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for long periods of time.
m) Damage Requiring Service - Only qualified personnel
should service this product.
If you have any questions
about service please
contact Numark at the
number(s) shown on the
back cover of this manual.
n) Grounding or Polarization - Precautions should be taken
so that the grounding or polarization means built into the
CD player is not defeated.
o) Internal/External Voltage Selectors - Internal or external
voltage selector switches, if any, should only be reset
and re-equipped with a proper plug for alternative
voltage by a qualified service technician. Do not attempt
to alter this yourself.
WARNING: To reduce the risk of fire or electrical shock, do
not expose this appliance to rain or moisture. Electrical
equipment should NEVER be kept or stored in damp
environments.
DM3000X/DM3002X
- The Leader in DJ Technology
©2001 Industries - 3 - http://www.numark.com
VERY IMPORTANT
Please read this entire manual before connecting this unit to your system
For optimum performance:
• The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a
warranted item.
• Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In
normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult
a professional technician.
• Always make sure that AC power is OFF while making any connections.
• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks
are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the
input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in
audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to
get.
• Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to
an authorized Numark Service Center.
• ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum
and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which
may cause severe speaker damage.
• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier
clipping.
• Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power
amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier
distortion is THE major cause of speaker failure.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or
anything wet on top of the unit!
Product Registration
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit. Retain this information and your original purchase receipt for
your records. Please return the enclosed warranty card to register your unit with us.
MODEL: __________________________ PURCHASED FROM:_________________________
SERIAL NUMBER:__________________ DATE OF PURCHASE:________________________


Produktspezifikationen

Marke: Numark
Kategorie: Mischpulte
Modell: DM3002X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Numark DM3002X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten