Numark CM100 Bedienungsanleitung
Numark
Mischpulte
CM100
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Numark CM100 (12 Seiten) in der Kategorie Mischpulte. Dieser Bedienungsanleitung war fĂĽr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
Professional Disc Jockey Products
CM-100
PROFESSIONAL DJ MIXER
USER’S MANUAL
©1999 Industries http://www.numark.com
CM100
- The Leader in DJ Technology
©1999 Industries - 2 - http://www.numark.com
Safety Information
SAFETY INSTRUCTIONS
a)
Read Instructions
- All the safety and operating
instructions should be read before this product is connected
and used.
b)
Retain Instructions
- The safety and operating instructions
should be kept for future reference.
c)
Heed Warnings
- All warnings on this product and in these
operating instructions should be followed.
d)
Follow Instructions
- All operating and other instructions
should be followed.
e)
Water and Moisture -
This
product should be kept
away from direct contact
with liquids.
f)
Heat
- Avoid placing this
product to close to any high heat sources such as radiators.
g)
Ventilation -
The appliance should be situated so that it’s
location or position does not interfere with it’s proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug,
or similar surface that may
block the ventilation
opening; or, placed in a built-
installation, such as bookcase
or cabinet that may impede
the flow of air through the ventilation openings.
h)
Power Sources
- This product should be connected to a
power supply only of the type described in these operating
instructions, or as marked on the unit.
i)
Power Cord Protection -
Power supply cords should be
routed so that they are not likely to be walked upon or
pinched by items placed on or against them. When
removing the cord from a power outlet be sure to remove
it by holding the
plug attachment
and not by pulling
on the cord.
j)
Object and Liquid Entry -
Take care that objects do not fall
into and that liquids are not spilled into the inside of the
mixer.
k)
Cleaning
– The appliance should be cleaned only as
recommended by the manufacturer.
l)
Non-use Periods
– The power cord of the appliance should
be unplugged from the outlet when left unused for long
periods of time.
m)
Damage Requiring Service -
Only qualified personnel
should service this product.
If you have any questions
about service please contact
Numark at the number(s)
shown on the back cover of
this manual.
n)
Grounding or Polarization -
Precautions should be taken
so that the grounding or polarization means built into the
CD player is not defeated.
o)
Internal/External Voltage Selectors -
Internal or external
voltage selector switches, if any, should only be reset and
re-equipped with a proper plug for alternative voltage by a
qualified service technician. Do not attempt to alter this
yourself.
WARNING: To reduce the risk of fire or electrical shock, do
not expose this appliance to rain or moisture. Electrical
equipment should NEVER be kept or stored in damp
environments.
CM100
- The Leader in DJ Technology
©1999 Industries - 3 - http://www.numark.com
VERY IMPORTANT
Please read this entire manual before connecting this unit to your system
For optimum performance:
• The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a
warranted item.
•
Never use spray cleaners on the slide controls
. Residues cause excessive dirt build-up and this will void your warranty. In normal
use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult a
professional technician.
• Always make sure that AC power is OFF while making any connections.
• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks
are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the
input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in audio
fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get.
• Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to an
authorized Numark Service Center.
• ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum
and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which
may cause severe speaker damage.
• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier
clipping.
• Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power
amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier
distortion is
THE
major cause of speaker failure.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or
anything wet on top of the unit!
Product Registration
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your
records. Please return the enclosed warranty card to register your unit with us.
MODEL: __________________________ PURCHASED FROM:_________________________
SERIAL NUMBER:__________________ DATE OF PURCHASE:________________________
Produktspezifikationen
| Marke: | Numark |
| Kategorie: | Mischpulte |
| Modell: | CM100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Numark CM100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mischpulte Numark
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
Bedienungsanleitung Mischpulte
- Mischpulte Yamaha
- Mischpulte Pioneer
- Mischpulte Vonyx
- Mischpulte Behringer
- Mischpulte Omnitronic
- Mischpulte Thomann
- Mischpulte Atlas Sound
Neueste Bedienungsanleitung fĂĽr -Kategorien-
19 August 2024
14 Juli 2024
13 Juli 2024
12 Juli 2024
10 Juli 2024
10 Juli 2024
4 Juli 2024
8 Oktober 2022
8 Oktober 2022