Numark 200FX Bedienungsanleitung
Numark
Mischpulte
200FX
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Numark 200FX (21 Seiten) in der Kategorie Mischpulte. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/21
mkII PROFESSIONAL 19” MIXER
Quick Start Owner’s Manual
Manual de inicio rápido para el usuario
(ESPAĂ‘OL)
Schnellbedienungsanleitung (DEUTSCH)
Manuel d’utilisation du propriétaire
(FRANÇAIS)
Manuale rapido di utilizzazione
(ITALIANO)
CONTENUTO DELLA CONFEZIONE
• MIXER
•CAVO DI ALIMENTAZIONE
CONTENU DE LA BOĂŽTE
• MIXER
•CÂBLE D’ALIMENTATION
SCHACHTELINHALT
• MISCHPULT
•STROMKABEL
BOX CONTENTS
• MIXER
•POWER CABLE
CONTENIDOS DE LA CAJA
• MEZCLADOR
•CABLE DE ALIMENTACI
Ă“
N
NORMAL
FILTERS
FLANGER
AUTOPAN
L R
AUTOCUT
FILTERED
LOPASS
VARI-CUT
RATERATE
DVD PLAYER
CD PLAYER
TO LINE
TO LINE
DJ MIC
TO MICTO PHONO 2TO PHONO 3
TO LINE
HOUSE AMP
DJ HEADPHONE
TO AMP
TO AMP
CD BURNER
TAPE DECK
or or
FROM RECORD
OR
DUAL CD PLAYER
TO LINE
TO LINE
TO LINE
FROM
FADER
START
REMOTE MIXER
OUTPUT
BOOTH AMP
MIXER QUICK SETUP
1. Make sure all items listed on the front of
this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET
BEFORE USING THE PRODUCT.
3. Study this setup diagram.
4. Place mixer in an appropriate position for
operation.
5. Make sure all devices are turned off and all
faders and gain knobs are set to “zero”
6. Connect all stereo input sources as
indicated in the diagram.
7. Connect the stereo outputs to power
amplifier(s), tape decks, and/or other audio
sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order.
• audio input sources (i.e. turntables or
CD players)
• mixer
• last, any amplifiers or output devices
10. When turning off, always reverse this
operation by,
• turning off amplifiers
• mixer
• last, any input devices
11. Go to http://www.numark.com for product
registration.
More information about this product may be
found at http://www.numark.com
1
222
3131333
4 4
4 4
5
6789 9
10
11
12
REAR CONNECTIONS
1. Phono Inputs: This input is used for
connecting your turntables through the
sensitive RIAA phono preamplifiers. Only
turntables with phono level output should be
attached. Line level turntables must be
attached to the line inputs.
2. GND: This screw connector should be used
to secure any turntables or other devices
connected to the mixer that need to be
grounded.
3. Line Inputs: CD players, Tape Decks,
Samplers or other line level input devices
should be connected to these inputs.
4. Microphone Input: Microphones with a ¼”
connector can be connected to these input
terminals.
5. Fader Start Connector: to attach your
mixer to a remote start equipped Numark CD
player using industry standard 1/8”(3.5mm)
cables.
6. Zone Output (RCA): This output is for
connecting an external monitoring device
such as a PA system, powered monitors or a
home stereo. The level of the zone stereo
output signal is controlled by the zone fader.
7. Record Output: This RCA output is for
connecting a recording device such as a tape
deck or CD recorder. The level of the record
output is based upon pre-master levels.
8. Master Output (RCA): This output is for
connecting an external monitoring device
such as a PA system, powered monitors or a
home stereo. The level fo the master stereo
out put signal is controlled by the master
fader.
9. Stereo Balanced Master Outputs (XLR):
low-impedance XLR type connectors
controlled by the Master fader.
10. AC In: This mixer is designed to work with
the power supply cord that comes with the
unit. While the power is switched off, plug
the power supply into the mixer first, then
plug it into the outlet.
11. Voltage Selector: Set this to the correct
voltage for your location standard.
12. Power Switch: Use this switch to turn on
the mixer after all input devices are already
connected to prevent damage to your
equipment. Turn the mixer on before you
turn on amplifiers and turn of amplifiers
before you turn off the mixer.
Produktspezifikationen
| Marke: | Numark |
| Kategorie: | Mischpulte |
| Modell: | 200FX |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Numark 200FX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mischpulte Numark
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
15 Mai 2023
Bedienungsanleitung Mischpulte
- Mischpulte Yamaha
- Mischpulte Pioneer
- Mischpulte Vonyx
- Mischpulte Behringer
- Mischpulte Mackie
- Mischpulte Omnitronic
- Mischpulte Thomann
- Mischpulte Atlas Sound
Neueste Bedienungsanleitung fĂĽr -Kategorien-
19 August 2024
14 Juli 2024
13 Juli 2024
12 Juli 2024
10 Juli 2024
10 Juli 2024
4 Juli 2024
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022