Netgear WGPS606 Bedienungsanleitung

Netgear Router WGPS606

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear WGPS606 (66 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/66

202-10083-01

March 2005

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

Phone 1-888-NETGEAR

Reference Manual for the

NETGEAR 54 Mbps Wireless

USB Print Server with 4-Port

Switch WGPS606

202-10083-01

NETGEAR, INC.

Technical Support

Please register to obtain technical support. Please retain your proof of purchase and warranty

information.

To register your product, get product support or obtain product information and product

documentation, go to www.netgear.com. If you do not have access to the World Wide Web, you can

service.

You will find technical support information at:

www.netgear.com/support/main.asp through the customer service area. If you want to contact

technical support by telephone, see the support information card for the correct telephone number

for your country.

Trademarks

NETGEAR is a registered trademark of NETGEAR, INC. Windows is a registered trademark of Microsoft

Corporation. Other brand and product names are trademarks or registered trademarks of their respective

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the

right to make changes to the products described in this document without notice. NETGEAR does not

assume any liability that may occur due to the use or

application of the product

(s) or circuit layout(s)

described herein.

202-10083-01

iii

Federal Communications Commission (FCC) Compliance Notice:

Radio Frequency Notice

Note: Changes or modifications not expressly approved by NETGEAR, Inc. could void the user's

authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Requirements

WARNING! To ensure compliance with FCC RF exposure requirements, the antenna used for this device

must be installed to provide a separation distance of at least 20 cm (8 in) from all persons and must not be

co-located or operating in conjunction with any other antenna or radio transmitter. Installers and end-users

must follow the installation instructions provided in this user guide.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 2.4 GHz frequency range. FCC requires this

product to be used indoors in 2.4 GHz the frequency range to reduce the potential for harmful interference to

co-channel Mobile Satellite systems.

FOR HOME OR OFFICE USE

Tested to Comply

with FCC Standards

NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch WGPS606

Produktspezifikationen

Marke:	Netgear
Kategorie:	Router
Modell:	WGPS606
Gewicht:	270 g
Betriebstemperatur:	0 - 40 °C
Zertifizierung:	FCC Part 15 Sub Class B and C
Kompatible Betriebssysteme:	Windows 98SE/Me/2000/XP
Abmessungen (BxTxH):	28 x 175 x 119 mm
Unterstützte Protokolle:	Ethernet, Fast Ethernet
Weitere Anschlüsse:	4x 10/100 Ethernet ports\n2x USB ports\n1x Power adapter port\n, USB 2.0(1.1), Ethernet
Datenübertragungsrate:	54 Mbit/s
Netzwerkfunktionen:	Wired LAN, Wireless LAn
Technische Eigenschaften:	Modulation Type:\nOFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
Network Connection Typ:	Wireless LAN