NEC NP04CM Bedienungsanleitung
NEC
Projektorzubehör
NP04CM
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NEC NP04CM (16 Seiten) in der Kategorie Projektorzubehör. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
Portable Projector
NP04CM Ceiling Mount Unit
Installation and Adjustment Manual
Thank you for your purchase of the NEC Projector ceiling mount unit.
Please read this installation and adjustment manual carefully to ensure proper use.
Special skills are required for the installation of the Projector.
This work should never be performed by the customer.
To the Dealer and the Installer
For the safety of the customer, we ask that the installation work be started
after careful attention is paid to the strength of the mounting location to be
sure it will withstand the weight of the Projector and mounting hardware.
Printed in Japan
NP04CM-0604K-02
CONTENTS
Heed the Following ....................................................................................2
Preparation ..................................................................................................4
List of Packaged Parts ......................................................................................4
Required Tools...................................................................................................4
Names of the Parts ............................................................................................4
Dimensions(VT676/VT670/VT570/VT470/VT47) ...............................................4
Dimensions(LT380/LT280) ................................................................................4
Guide to Screen Size and Projector Mounting Position..........................5
Screen Size and Projection Distance (VT676/VT670/VT570/VT470)..............5
Screen Size and Projection Distance (VT47)...................................................6
Screen Size and Projection Distance (LT380).................................................7
Screen Size and Projection Distance (LT280).................................................8
Screen Size Conversion Table .........................................................................9
Mounting the Projector.............................................................................10
Replacing the Lamp ..................................................................................13
Adjustment of the Projection Angle ........................................................14
Distortion Adjustment .....................................................................................14
Fine Adjustment...............................................................................................16
Specifications............................................................................................16
PRINTED WIT H
SOYINK T M
Printed on recycled paper.
2
Heed the Following
• When installing the projector, be sure to
do so as explained in this manual. The
projector may fall and cause injury if it is
installed improperly.
• To prevent the projector from falling, install
it in a place and fasten it in a way with
sufficient strength to support the combined
weight (4.9 kg) of the projector (2.9 kg)
and the ceiling mount unit (2.0 kg) for an
extended period of time as well as to
withstand earthquakes. Insufficient
strength or fastening may result in the
projector falling and causing injury.
• To ensure safety, be sure to tighten the
bolts and screws securely. Also be sure to
use the included units and other metal
fittings. Failure to do so may result in the
projector falling and causing injury.
• When sliding the opening of the mounting
adapter over the pin of the ceiling
attachment unit, check that the pin of the
ceiling attachment unit is fully seated in
the opening. If not, the projector may fall
and cause injury.
• Do not modify any parts. Doing so may
result in the projector falling and causing
injury.
WARNING
• Do not use broken parts. Doing so may
result in the projector falling and causing
injury. If a part should be broken, consult
your dealer.
• Do not look into the lens when the
projector is turned on. Doing so could
damage your eyesight.
• Make adjustments as described in this
manual.
Incorrect adjustments may result in the
projector falling and causing injury.
This symbol alerts the user that important information concerning the
operation and maintenance of this unit has been provided. The
information should be read carefully to avoid problems.
Heed the Following
3
CAUTION
• Do not obstruct the projector's ventilation
holes. Doing so will prevent the dissipation
of heat and may result in fires. In
particular, do not use the projector in the
following ways:
Do not install the projector in a wall or in a
tight place where ventilation is poor, place
a cover it, etc.
• Do not install the projector in front of the
outlets of an air conditioner or heater or in
a place where vibrations are strong.
Doing so may result in fires.
• Do not install the projector in humid or
dusty places or exposed to smoke or
steam (such as near cooking equipment or
humidifiers). Doing so may result in fires.
• When installing the projector, leave
sufficient space between it and
surrounding objects. Failure to leave
sufficient space will prevent the dissipation
of heat and may result in fires.
• When removing the screws on left and
right on the mounting adapter, be sure to
support the projector while doing so.
Failing to do so may result in the projector
swinging back abruptly and causing injury.
• for PLUGGABLE EQUIPMENT, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
Installation Precautions
•Special techniques are required for the
installation work of the projector and
installation work should only be
undertaken by qualified and licenced
installers.
•NEC Display Solutions will not accept any
responsibility related to any accidents or
incidents due to insufficient or inferior
mounting techniques.
Installation Location
Avoid places of high temperature or low
temperature.
(Ambient operating temperature: 0°C to
35°C)
Avoid places exposed to direct sunlight and
the vicinity of ventilation holes of room air
conditioning and heating.
Avoid rooms with a lot of dust, humidity,
greasy smoke, or tobacco smoke.
Dirt will adhere to optical parts such as
lenses and mirrors and this will cause a
deterioration of image quality.
Avoid places in which the screen is exposed
to direct sunlight or illumination light.
When surrounding light directly hits the
screen, the image appears washed out and
is difficult to view.
Produktspezifikationen
| Marke: | NEC |
| Kategorie: | Projektorzubehör |
| Modell: | NP04CM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NEC NP04CM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Projektorzubehör NEC
6 August 2024
23 Juli 2024
22 Juli 2024
13 Juli 2024
Bedienungsanleitung Projektorzubehör
- Projektorzubehör Da-Lite
- Projektorzubehör Sanyo
- Projektorzubehör BenQ
- Projektorzubehör Manhattan
- Projektorzubehör Nedis
- Projektorzubehör Sony
- Projektorzubehör Panasonic
- Projektorzubehör Auna
- Projektorzubehör Optoma
- Projektorzubehör Casio
- Projektorzubehör ViewSonic
- Projektorzubehör Vogel's
- Projektorzubehör Vision
- Projektorzubehör Barco
- Projektorzubehör InFocus
- Projektorzubehör Sanus
- Projektorzubehör NewStar
- Projektorzubehör Speaka
- Projektorzubehör Projecta
- Projektorzubehör Peerless-AV
- Projektorzubehör Peerless
- Projektorzubehör Chipolino
- Projektorzubehör XGIMI
- Projektorzubehör Chief
- Projektorzubehör Christie
- Projektorzubehör Konig & Meyer
- Projektorzubehör Gabor
- Projektorzubehör V7
- Projektorzubehör Tempest
- Projektorzubehör Elite Screens
- Projektorzubehör Gravity
- Projektorzubehör Unicol
- Projektorzubehör Roadinger
- Projektorzubehör My Wall
- Projektorzubehör Kingpin Screens
Neueste Bedienungsanleitung für -Kategorien-
28 September 2024
23 September 2024
15 September 2024
13 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024